Five-parameter injection profile logging is a new method for injection profile logging.
五参数注水剖面测井是测量注水井注水剖面的新的测井方法。
Isotopic trace injection profile logging theory is based on isotopic tracer measurement technology.
同位素示踪注水剖面测井的理论基础是同位素示踪测量技术。
The electromagnetic flowmeter applied in the oil field injection profile test has better accuracy and effect.
油田注入剖面测试中应用的电磁流量计测量精度高，有较好的应用效果。
It can enlarge the range of application of injection profile logging and improve the accuracy of logging interpretation.
经过应用，扩大了注入剖面测井的适用范围，提高了测井资料解释精度。
The electromagnetic flowmeter is a suitable tool to meet the need of injection profile logging for polymer injection Wells.
电磁流量计是一种新型测量注入剖面流量理想的仪器。
In order to improve the accuracy of water injection profile logging, a new water injection profile logging tool is developed.
为了提高注入剖面测井的准确性，研制了一种新型注入剖面组合测井仪。
For water injection oilfield, water injection profile date is very important to dynamic analyzing and adjuring water injection.
对于注水开发油田，吸水剖面是油田动态分析和注水调整的重要依据。
Log examples show that the new carrier is reliable in water-injection profile log in tertiary infill Wells and low water-injection Wells.
证明了在三次加密井网和“三低”油田低注水井注水剖面测井中使用新型同位素载体的可靠性。
However, there exist two unfavour factors, which are uneven steam injection profile and channeling, to affect the performance of steam soaking.
蒸汽吞吐和蒸汽驱是目前稠油开采的主要方法，吸汽剖面不均匀、汽窜是影响蒸汽驱开采稠油的主要问题。
Major factors which influence the steam injection profile are steam overlaying and high-permeability zones during steam flooding and cyclic steam injection.
在蒸汽驱和蒸汽吞吐过程中，影响蒸汽注入剖面的主要因素是蒸汽超复现象和高渗透层。
In multilayer heterogeneous reservoir, the interlayer difference would lead to nonuniformity of injection profile and influence water displacement efficiency.
对于多油层非均质油藏，层间差异会导致吸水剖面不均匀，影响水驱效率。
Logging data analysis of Well X7-11-632 proves that the design of this ultrasonic flowmeter is proper and can meet the need of injection profile logging of oilfields.
对杏711 63 2井的测井资料进行了分析，证明了该超声流量计设计合理，可以满足油田注入剖面测井的需要。
It is a economical and reasonable way to use short, fast, hot water injection in order to change the condition that temperature log can't delineate water injection profile.
在注水方案中，短期、快速、热注是改变当前温度测井曲线对注水剖面反映不明显或不能反映注水情况的一个比较经济合理的方法。
The injection profile logging as one of the important methods for dynamic inspecting provides the support for the design of the exploitation project and enhancing the recovery factor.
吸水剖面测井作为动态监测的重要手段之一，可为针对性地设计开发方案，提高采收率提供支持。
Foam profile controlling system can improve the mobility ratio, adjust the water injection profile and improve the efficiency of oil washing in porous media, but the system has poor stability.
泡沫调剖体系在多孔介质中能够有效改善流度比，调整吸水剖面，提高洗油效率，但是体系稳定性较差。
Also, reasonable suggestion for improving water injection technics can be proposed to identify water injection profile better with temperature log by analyzing the results of numerical simulation.
同时，对如何改善注水工艺，以提高井温测井识别注入剖面的能力提出了合理化建议。
The interpretation precision and application degree of this information can be improved very well through the corrective method and secondary interpretation to water injection profile information.
经过对吸水剖面测井资料进行污染校正和二次解释，使资料的解释精度和应用水平得到很大提高。
Practice shows that the related flow rate, isotope element and oxygen reactivate combination log- ging technology can be used to find out the improvement of the injection profile after adjustment …
实际表明，相关流量、同位素和氧活化组合测井技术可以用来了解调整后注入剖面的改善状况、认识二类油层非均质层间矛盾、监测小层动用状况、判断剩余油分布等。
Another goal is to raise the profile of Dependency Injection both inside and outside of Microsoft.
另一个目标是提高依赖注入容器在微软内外的使用。
Pollution in non-target zones can be reduced, the efficiency of profile control can be improved by using rational injection pressure.
合理的注入压力可减少对非目的层的污染，提高调剖措施的有效率。
Objective: to evaluate the effect of the masseter injection of botulinum toxin combined with buccal fat pad resection in facial profile plastic surgery.
目的：探讨肉毒素咬肌注射和颊脂垫切除术联合应用在面部改形中的作用。
The injection pressure rose, the injectivity profile and interlayer contradiction was modulated.
水井注入压力升高，吸水剖面得到调整，层间矛盾得到改善；
Had determined a minute profile, the casting system and so on, has chosen the injection machine, has calculated the formation spare part size.
确定了分型面、浇注系统等，选择了注射机，计算了成型零部件的尺寸。
The characteristics of electronic unit pump(EUP) fuel injection system were studied when matching tangent cam profile.
研究了电控单体泵燃油系统特性在匹配切线凸轮型线下的燃油特性。
A set of sludge profile control and injection technology that is suitable for Jianghan Oilfield has been formed.
形成了一套适用于江汉油田的污泥调剖和注入工艺技术。
There are 6 injection Wells in this unit, 5 Wells were selected to be carried out profile control by means of the decision factor.
从该单元的6口注水井中，根据决策因子优选了5口井进行调剖。
A two-component indepth profile modifying agent, LF-1, is prepared for plugging high permeable channellings in further bore zones of high pressure water injection Wells in Huqing, Zhongyuan.
为了封堵中原胡庆油田高压注水井远井地带的高渗层，研制了双液法堵剂LF 1。
Enhancing the testing profile control and management in the injection well is becoming more and more important in development adjustment when oilfield entered middle and later development period.
油田开发进入中、后期时，搞好注入井的测试调剖和加大注入井的管理在开发调整中的作用越来越重要。
Field procedures of profile control disposal by Xanthan gum in water injection well are described and profile control results are analyzed.
文中着重叙述了黄原胶在枣园油田注水井调剖处理的现场施工简况，并对调剖效果进行分析。
Though a lot of laboratory tests, it confirms that the technique of use oily sludge to the profile control of the injection well is feasible.
通过大量室内实验证实，利用含油污泥对注水井进行调剖的技术是可行的。
应用推荐