The study demonstrated that the principle of rotating injection molding method is successful and it can be well used in the production.
通过研究证明旋转注射成型方法的原理是成功的，同时也证明旋转注射成型方法能够很好的应用于生产实践。
Nowadays, smart well technique has been applied to horizontal well, offset well, multi-lateral well, remote area and subsea operation and also to production well and injection well.
目前，智能完井技术在国外已经应用到水平井、大位移井、分枝井、边远井和水下采油树井及多层采油井和注水井。
After the coal injection system goes into operation, it achieves the expected control effect and improves the quality and output of powered coal, as well as realizes production automation.
该系统投产后达到了预期的控制效果，提高了煤粉的产量和质量，实现了生产自动化。
The application of one - well injection and multi - well production technique in Du 84 Block has improved the production efficiency and economic benefits.
前言： “一注多采”技术在杜84断块的应用，改善了生产效果，提高了经济效益。“
But at present, the technology of boosting pressure for water injection on well groups still has some problems, and it should be improved in the production practice unceasingly.
但目前井组增压注水还存在一些问题，应在生产实践中不断改进技术。
Pressing crack is one of important means for increasing oil and gas well production and water injection of injection well.
水力压裂是油气井增产、注水井增注的一项重要措施。
Dynamic injection and production model of injection and production gas well of gas storage is built on the base of studying numerical simulation data of underground gas storage.
在地下储气库数值模拟资料调研基础上，建立了储气库注采井动态注采模型。
According to the injection and production characteristic of ASP flooding and numerical simulation, this paper analyzes the proper well arrangement pattern of ASP flooding in Daqing Oil Field.
依据三元复合驱矿场试验的注入、产出动态特征及数值模拟计算，分析了大庆油田三元复合驱适合的布井方式。
The results show that the accuracy of injection to production adjusting and stimulation project for individual well is improved.
应用结果表明，提高了各种注采调整方案和单井措施增油方案的准确性。
Oilgas outputs, injection effectiveness and service life of production and injection well are directly affected by casing deformation and damages, such as outside force, chemical corrosion and so on.
由于套管受到外力、化学腐蚀等因素的作用而引起套管变形、损坏，直接影响油田油气产量和注水效果及油水井的使用寿命。
The results indicates thai it is an effect measure for improving waterflood to regulate the injection as well as production profiles and stimulate the production of the group and the whole block.
试验结果表明，单元整体调剖、综合治理是改善单元注水开发效果的好方法。
Acid fracturing is an effective method to reform carbonate reservoir and an important stimulating method to improve the production of oil (gas) well and the injection rate of water well.
压裂酸化(又称酸压)是改造油气层的有效方法，是油气水井的重要增产增注措施。
The effect of the water injection well fracturing on the adjacent oil well production is calculated by the model and then the fracture parameters of water injection well are optimized.
使用该模型计算注水井压裂对相邻油井的产量影响情况，从而优选出注水井裂缝参数。
Acid treatment is an important measure to improve production and injection for producer and injector, and pressure transient well test is one of methods for evaluating effects of acid treatment.
酸化是油、气、水井增产增注的重要措施，压力不稳定试井是评价酸化效果的主要手段。
Factors affect gas lift options: the yield of the well bottom-hole pressure, fluid production index, lifting height and the gas injection pressure.
影响气举方式选择的因素有：井的产率、井底压力、产液指数、举升高度及注气压力等。
This paper introduces a kind of dynamical tuning gyroscopic logging technology to re survey the well body track in cased production and injection Wells.
文章介绍了一种用于已下套管的油水井重新测量其井身轨迹的动力调谐陀螺测井技术。
Tests at production well and injection well showed that magnetization improved the acidizing operation result.
在首次进行的生产性试验中，取得了良好效果。
Multivariate time series method is used to analyze the performance of oil production and injection Wells. A multi factor model for predicting the water cut in oil well is presented.
采用多元时间序列分析的方法，对油水井动态特性进行了分析，建立了油井含水率的多因素预测模型。
The variations of dimensionless water-injection rate and injection rates in the vertical well are determined by dimensionless liquid production rate in horizontal well.
根据水平井的无因次产液速度确定出直井的注水速度，无因次注水速度随时间的变化规律。
Encapsulates, bi-color, molds as well as injection molding production privately operated Sole-source investment enterprise primarily and so on compression casting, company in product design;
包胶，双色，压铸等模具以及注塑生产为主的私营独资企业，公司在产品设计；
Many measures of increasing oil mass and decreasing quantity of water are implemented to old well in order to slow down oil production decline and control ineffective water injection and production.
为减缓原油产量递减速度、控制无效注水量，要对老井实施大量的增油降水措施。
Output will be suspended for commissioning of a water-injection plant, tie-in of a second water-injection well, and preparation for tie-in of a second production well.
生产。另外，注水站将暂停输出进行调试，同时与第二口注水井连接，并为与第二口生产井连接做好准备。
Output will be suspended for commissioning of a water-injection plant, tie-in of a second water-injection well, and preparation for tie-in of a second production well.
生产。另外，注水站将暂停输出进行调试，同时与第二口注水井连接，并为与第二口生产井连接做好准备。
应用推荐