The paper then certifies this algorithm by infrared image processing.
并且文中使用红外图像对这个算法进行了验证。
Infrared image processing is one of the key technology of infrared imaging guidance systems.
红外图像信息处理是红外成像制导系统的关键技术。
The results show that the whole software system can meet the demands of real-time infrared image processing.
结果表明，整个软件系统能够满足红外实时图像处理的要求，具有良好的实时性和可靠性。
Experimental results demonstrate that this method can effectively be used in real time infrared image processing.
实验结果表明，此方法可以应用于实时红外视频图像的处理，并能达到较好的效果。
Four typical algorithms used in infrared image processing are studied in the simulation experiment of machined corrosion parts.
本文通过机械加工模拟腐蚀件的实验，对红外热图像处理中的四种典型算法进行了研究。
With the use of FPGA in target detection, high-speed can be reached to satisfy the real-time desire of the infrared image processing system.
将FPGA用于目标检测，发挥了FPGA的高速优势，可实现红外目标的实时检测。
In the paper, an infrared image processor based on SOPC technology is discussed, which has real - time infrared image processing and display driving function.
介绍了一种基于SOPC技术的红外图像处理器，可对数字红外图像进行实时处理和显示驱动。
An infrared image processing solution is proposed. It USES bi-threshold method to segment image and enhance the image with segmentation gray scale transform method.
针对红外图像，采用双门限分割法进行图像分割，然后采用分段灰度变换法进行图像增强。
It is a new application for DIS (Digital image Stabilization) to the infrared image processing field, in infrared homing seeker of single channel-controlled air defense missile.
在单通道红外寻的防空导弹中采用电子稳像技术进行红外图像的稳像处理，是电子稳像技术一个新的应用领域。
In the purpose of recognizing and tracking targets from infrared thermal images, an infrared image processing algorithm based on mathematical morphology and wavelet transform was presented.
为了从红外热图像中识别和跟踪目标，提出了一种采用数学形态学和小波变换相结合的红外图像处理新方法。
With digital signal processing (DSP) chip, the hardware and software of infrared image processing system are designed for the purpose of auto-detection and correction of the invalid pixels.
基于DSP实现了红外图像的硬件处理系统并编写了失效元处理的软件程序，实现了失效元的自动检测和校正。
Then, it researched some main methods of nonuniformity correction and detecting approach and compensation of blind-pixel of focal plane array, and the techniques of infrared image processing.
其次研究了几种主要的非均匀校正方法以及焦平面阵列元的盲元检测和补偿的方法，对红外图像处理技术做了研究。
In this paper, the infrared image processing hardware system is outlined. The requirements of the system for image pretreatment and the work that the pretreatment part must to be done are introduced.
本文首先概述了红外图像处理硬件系统，介绍了系统对图像预处理的要求，以及预处理部分要完成的工作。
CEDES works with optical sensors on the basis of active infrared technology and image processing.
CEDES在积极的红外线技术和图像处理的基础上与光学传感器进行合作。
Infrared image edge detection is one of the difficult problems in image processing.
红外图像的边缘检测是图像处理领域的难题之一。
Some problems about system debugging and application, including the high-speed transmission of multichannel infrared image, real-time display and processing, are solved.
该方法解决了系统调试和应用中多波段红外图像高速传输、实时显示与处理的问题。
So it is the most economical and effective way of adding the real-time image processing function in processing part of the infrared thermal imager.
而在红外热像仪的电子处理部分加入实时图像处理功能是解决问题的一个最经济最有效的手段。
A miniature and fast speed infrared thermal imager and image processing system is recommended in this paper.
本文推荐一种小型快速红外热像仪及图像处理系统。
The basic technology real-time signal processing arithmetic and hardware architecture of infrared image detecting system were presented.
探讨了一种红外成像探测系统实时信号处理算法、硬件结构等关键技术。
In order to improve the image discernment precision of infrared tracking system, the genetic algorithms based on wavelet transform is used in the processing of aerial target thermal image.
为了提高红外跟踪系统的图像识别精度，本文针对红外探测器生成的空中目标图像，提出用基于小波变换的遗传算法对红外热图像进行处理。
TIPS image processing and analyzing system for infrared thermal imaging system developed was introduced.
介绍研制的红外热象仪计算机图象处理与分析系统。
Infrared video image digital processing system is an absolutely necessary circuit for IRFPA detectors, which is extremely important to imaging quality.
红外视频图像数字预处理系统是红外焦平面阵列探测器必备的后处理电路，对成像质量的影响越发重要。
The linear light source of the near infrared, CCD technology and computer image processing technology have been applied in the software and hardware implementation of rail abrasion detection system.
采用近红外线状光源、CCD及计算机图像处理等技术，实现钢轨磨损检测系统的软硬件设计。
In this paper, the near infrared image acquisition, processing and analysis system and its implementation are presented.
介绍作者研制的近红外图像采集、处理与分析系统中的软硬件模块及其实现方法。
As to acquire infrared image of high quality for observing, we should carry out analog processing and digital image processing such as enhancement and noise removal to the original images.
为了获取高质量且便于观察的红外图像，必须对原始图像信号进行模拟前端处理以及去噪和增强等数字图像处理。
The Rough Set Theory is introduced into the enhancement of infrared image. Also the tentative exploration of the application of the Rough Set Theory has been made in image processing.
本文将粗糙集理论引入到红外图像增强中，对粗糙集在红外图像处理中的应用做了一些初步的探索。
The Otsu's method is an effective algorithm for image segmentation. But it is unfit for the real-time image processing in the high frame rate infrared imaging tracking system for it is time-consuming.
最大类间方差法是一种常用而有效的图像分割算法，但由于计算量较大，不适宜于红外成像跟踪系统中高帧频的实时图像处理。
The Otsu's method is an effective algorithm for image segmentation. But it is unfit for the real-time image processing in the high frame rate infrared imaging tracking system for it is time-consuming.
最大类间方差法是一种常用而有效的图像分割算法，但由于计算量较大，不适宜于红外成像跟踪系统中高帧频的实时图像处理。
应用推荐