The STD industrial controller is applied to the interface so that the module and flexibility of system are enhanced.
人机接口采用STD工控机，提高了系统配置的模块化和灵活性。
The results of this research provide a reference for the development of other high performance industrial controller.
本课题的成果可以为其它高性能工业控制器的研发提供借鉴和参考。
Programmable logical controller is a new kind of industrial controller which is developed on the bases of micro-processor and synthesizes computer and automation technology.
可编程序控制器是以微处理器为基础，综合了计算机技术与自动化技术而开发的新一代工业控制器。
The system is composed of industrial PC, DMC300 motion controller, discharge status checking card, A/D card, I/O card and pulse power.
该系统由工业PC，DMC300运动控制器，放电状态检查卡，A/D 卡，I/O 卡和脉冲电源组成。
Interfacing the 853 digital signal power controller with a computer allows the controller to be truly customized for any industrial heating application.
接口信号电源控制器与计算机的853数码允许控制器真正应用定制任何工业加热。
Programmable logic Controller (PLC) is the largest consumption of computerized industrial controlling device. The courses on PLC are now offered in all technological universities.
可编程序控制器(PLC)是用量最大的微机化的工业控制设备，现在各工科大学都开设了PLC课程。
CAN bus industrial control network system is successfully developed by using Controller Area network (CAN) and distributed computer control technology.
本文采用控制器局部网(CAN)和分散型计算机控制技术，成功地研制了CAN总线工业测控网络系统。
Single input and single output loop controller using one sensor is widely applied in the industrial control field.
采用单一传感器的单输入单输出回路控制器在工业控制领域应用非常广泛。
There are three important parts in industrial automation field, such as PLC (Programmable Logic Controller), robot and CAD/CAM.
可编程控制器（PLC）、机器人、CAD/CAM是工业自动化领域的三大基础。
With the development at full speed of technology of the computer and industrial control, it is feasible to apply the technology of computer and programmable logic controller into the heat pump dryers.
随着计算机技术和工业控制技术的飞速发展，把计算机技术结合可编程序控制器技术应用于热泵干燥机是可行的、是大势所趋。
The original relay control system of industrial washing machine is innovated and replaced by programmable controller, good stability and reliability of the system is achieved.
介绍了利用可编程控制器对继电器控制式工业洗衣机进行改造的过程，实现了系统的高稳定性和可靠性。
An internal model controller design for industrial process with dominant delay is proposed, it makes internal model control combine with double-port control and is a proved technique.
针对具有此种情况的大纯滞后工业过程，提出了一种将内模控制与双口控制相结合的改进的内模控制器设计方法。
Programmable controller and related equipment, should press easily and industrial control system as a whole, easy to expand its function design principles.
可编程序控制器及其有关设备，都应按易于与工业控制系统形成一个整体，易于扩充其功能的原则设计。
Programmable logic controller (PLC) is a kind of electronic device for digital operation which is designed for industrial application specially.
可编程序控制器(PLC)是一种专门为在工业环境下应用而设计的数字运算操作的电子装置。
A method of rapidly constructing industrial robot controller by using PLC is introduced in this paper the method has the advantages of reducing the hardware and software research difficulties.
本文介绍了用PLC快速构造工业机器人控制器的方法。这个方法具有减少硬件和软件研制难度的优点。
PID controller has been widely applied to the automation of industrial process due to its robustness and artificial intelligence architecture.
PID控制器具有鲁棒性及人工智能性的特点，广泛应用于工业过程自动化。
This paper presents a new method used to implement industrial real-time video controller with DSP and SAA7111AHZ.
本文介绍了一种使用DSP和视频处理芯片SAA7111AHZ实现工业用实时视频控制器的方法。
This paper develops a set of barycentre of plane automat Ed control system based on industrial personal computer and programmable logic controller aiming at the defect of avionics in our country.
针对目前我国机载航空电子设备特别是重心控制设备的落后现状，设计一套基于工业控制计算机和可编程逻辑控制器的飞机重心自动控制系统。
In the procedure of industrial manufacture automatization, programmable controller displays infinite advantage.
可编程控制器在工业生产自动化过程中，显示出极大的优越性。
When it comes to selecting the right temperature controller for your needs, we offer a wealth of experience in choosing process control equipment for industrial applications.
当需要选择最合适的温度控制器满足您的要求时，我们可提供您大量的建议，因为我们在选择工业控制设备方面已有多年的工作经验。
The essay sums up possible faults and problems about programmable logical controller widely used in industrial production and we should take corresponding techniques.
总结了在工业生产中得到广泛应用的可编程控制器在使用中可能出现的故障以及应注意的问题和相应采取的防范技术。
An open CNC system with two CPUs in parallel, in which the center is PMAC motion controller and the supporting element is industrial PC, is suggested.
提出了一种以PMAC运动控制器为控制系统核心、工业控制机为系统支撑单元的双cpu开放式数控系统。
This paper mainly introduces fuzzy controller and its application in industrial process. The controlling system based on fuzzy controller is more stable and reliable.
介绍了模糊控制器算法设计及其在工业生产过程控制中的应用，所设计的系统工作稳定性和可靠性较好。
The PID controller is most commonly used for industrial applications.
PID控制器在工业领域应用最为广泛。
A new type controller of LZ-1 model is discussed in this paper it is good for the industrial furnaces, with low cost and high performance.
介绍了一种适合在中小型工业炉窑上推广应用的LZ-1型低成本高性能的炉窑控制器的软、硬件等方面的设计和研究。
The integrated monitoring and controlling system is introduced, which is composed of industrial control computer and field monolithic data sampling controller.
介绍了由工业控制计算机和现场单片机采样控制器组成的干式有载调压变压器集中监控系统的设计。
As an important temperature control device, the PID temperature controller has been widely used in many industrial processes.
PID温度控制器作为一种重要的温度控制设备，在诸多工业生产过程中得到了广泛的应用。
Flynn's flywheel motor controller is also replacing the industrial batteries used by mission-critical data centers and hospitals.
弗林的飞轮电机控制器也是取代关键任务数据中心和医院使用的工业电池。
The article introduces an automatic control system of asphalt modification equipment, which makes use of PLC as core controller and industrial computer.
介绍了利用PLC作为核心控制器，使用工控机作为上位机，对改性沥青设备进行自动控制的系统。
Secondly, this algorithm is applied to the PID controller tuning and the industrial design with restrictions. The results are fairly well.
第二，将本文所提改进粒子群算法应用于工业PID控制器的参数整定，以及带约束优化的工业设计中，均取得了非常理想的效果。
应用推荐