Presently, this technology has been widely applied to many fields, such as medical diagnoses, industrial automatic measuring and control, intelligent robot, transportation, communication and geology.
目前，在医疗诊断、工业自动检测与控制、智能机器人、交通、通讯、地质等领域，计算机图像处理技术己经得到了广泛应用。
It is not convenient to carry out industrial control since different types of PLC have different communication protocols.
不同类型的PLC有着不同的通讯协议，这给工业控制带来许多不便。
By making relative communication protocol in the SCM and the same in the PC, the card can be directly used in an industrial field control system with highspeed data transmission.
通过在单片机方和PC机方制定相应的通讯协议，该卡能直接用于采用计算机技术、对要求数据传输速率比较高的工业现场控制系统中。
MODBUS protocol is opening communication protocol provided by MODICON and widely used in the industrial control region.
MODBUS协议是MODICON公司推出的一个开放式通信协议，广泛运用于工业控制领域。
The application of Ethernet in industrial control systems with high specification in requirement of real time performance is limited because of its indeterminacy in real time communication.
以太网的实时通信不确定性是其应用于实时性要求较高的工业控制系统中的障碍。
Meteorological monitoring control system is a comprehensive monitoring system based on computer, communication, electronic technology and industrial control.
气象检测控制系统是集计算机、通信和电子技术、工业控制为一体的综合探测系统。
Computer communication network is widely used in industrial automatic control area.
计算机通信网络在工业自动化领域中的应用十分广泛。
As a sort of industrial control products, the most important difference between wireless products and ordinary products is the mode of communication.
无线产品作为工业控制产品的一个种类，与有线产品最主要的不同之处是通讯方式发生了改变。
When emulated and simulated, the module can also communicate with industrial control unit and any other assist devices having communication port to realize complicated industrial control.
通过多次仿真与模拟，该模块还能与工控机以及具有通讯接口的任何辅助器件进行通讯，完成复杂的工业控制。
Non deterministic communication delay of Ethernet which can't satisfy the real time request of industrial control has become the main obstacle in application on filed device layer network.
以太网存在通信不确定性，不能满足实时性要求，成为应用于工业现场设备层网络的主要障碍。
The method of data communication between PC bus industrial computer and MCS-51single chip computers in rubber vulcanization distributed control system is introduced.
介绍了硫化过程微机集散控制系统中PC总线工业控制计算机与多台MCS-51单片机为核心的硫化控制仪之间的多机通信的方法与实现。
Industrial wireless control network is a communication network which connects wireless industrial measurement and control equipment.
工业无线控制网络是连接工业现场无线测量控制设备的一类通信网络。
PC monitoring system based on RS485 communication composed by Intellectual power instrument and industrial control instrument with communication terminal were introduced.
介绍了一种应用带通讯口的智能仪表和工控机，组成的基于RS485通讯的微机监测系统。
While it is usually adopts other protocols of the embedded device of industrial control and communication.
而在工业控制和通讯的嵌入式设备中，更多的是采用其它协议。
Along with the rapid development of mobile communication technology as well as the rushing of smart pocket devices, it is more likely to apply them to the industrial control field.
而随着移动通信技术和智能掌上设备的飞速发展及其应用领域的不断拓宽，将它们应用到工业控制领域已经越来越成为可能。
It discussed theoretically about the token ring, Ethernet and FDDI, which is normally used in DCS communication network, and analyzed its merit and defects in regard of industrial control requirement.
主要针对在DCS通讯网络中常见的令牌网、以太网和FDDI网从理论上进行了一些讨论，并结合工业控制的要求分析了各自的优缺点。
Our products can be used in various fields, such as broadcast, TV, computer communication network, building monitoring and power equipping, industrial auto control, military, etc.
产品覆盖广播、电视、计算机通信网络、楼宇监控和配电、工业自动化控制、军事等各行业。
Integrating the conventional relay control, computer control and communication control technologies, programmable logic control (PLC) is designed specially for industrial control.
可编程控制器(PLC)将传统的继电器控制技术、计算机控制技术和通信技术融为一体，专为工业控制而设计。
In recent years, with the rise of short-range wireless communication technology, wireless technology is gradually infiltrating into the field of industrial control.
随着近几年中、短程无线通信技术的崛起，无线通信技术正逐步渗透到工业监控领域。
Moreover it presents a new real-time Ethernet communication protocol with deterministic scheduler in order to satisfy requirement of industrial-control system.
并且，为了实现新一代工业控制系统，提出了一种基于确定性调度的以太网实时通信方法。
The communication between control and the kernel of industrial control software is realized through control event, method and attribute.
通过控件的事件，方法和属性以实现控件与工控软件内核的沟通。
The industrial control computer implements functions of management, parameter setting, communication, monitor, statistics and inquiry.
工控机实现配方管理、参数设置、通讯、监控、统计、查询等功能。
The paper presents a method of communication between single chip microcomputers in the same industrial control module.
给出了一种智能工控模块内单片机间通信的方法。
The Industrial Ethernet-based communication card Design of DCS remote IO control station is presented. The Card is used for exchanging data between the DCS main control station and remote IO.
文章介绍了一种基于工业以太网白勺通讯卡设计方案，该通讯卡在远程IO和DCS主站之间实现交换数据。
The Industrial Ethernet-based communication card Design of DCS remote IO control station is presented. The Card is used for exchanging data between the DCS main control station and remote IO.
文章介绍了一种基于工业以太网白勺通讯卡设计方案，该通讯卡在远程IO和DCS主站之间实现交换数据。
应用推荐