The induction heating equipment and heat treatment process of thick-wall pipe were reconstructed.
对厚壁管感应加热设备及热处理工艺进行了重新设计改造。
C. 4.2this heat treatment shall be carried out in a furnace or if required by electric induction heating.
通过电感应加热(如有必要)在炉内进行热处理。
The heater receives the induction heating of a square copper coil by using a square heat insulation layer.
加热器是经过方形保温层接受方形铜线圈的感应加热。
During induction heat treating of pump tube, quenching machine tool plays a key role to fulfill the required properties.
在成套泵筒感应热处理设备中，淬火机床对满足性能要求起着关键作用。
OBJECTIVE: Study the feasibility of using an alternating magnetic field from induction heating furnace to heat the NITI stent.
目的：应用工业用电磁炉间接加热niti合金支架，探讨加热支架的可行性。
The article brings forward a model of the heat resource in high frequency induction heating and analyzes the temperature field.
针对高频感应加热的特点，提出了感应加热热源的有限元模型。
The channel induction heating is one of the most promising technologies used to heat the molten steel in tundish for continuous casting.
通道式感应加热技术是最有前景的中间罐钢水加热技术之一。
Henan Zhongxing Electric Co., Ltd. is specialized in producing induction heating equipment, high-tech enterprise, China heat Treatment Association.
中兴电气有限公司是专业生产感应加热设备的高科技企业、中国热处理协会会员。
Power supply for induction heating is an equipment to heat the workpiece by whirling current and it is applied widely in industry because of its many virtues.
感应加热电源是利用电涡流对工件加热的一种装置，由于具有诸多优点而在工业中得到了广泛的应用。
The surface temperatures of half-shafts of car under variant parameters during induction heat treatment were measured by using RAYTEK infrared temperature sensor.
利用RAYTEK红外测温仪测量了汽车半轴中频感应淬火时不同电参数情况下的表面温升曲线。
The results show that the induction heat power of magnetic field amplitude-modulated with sine wave and square wave is unrelated to the frequency of modulating wave.
结果表明：方波和正弦波调幅磁场的感应热功率都与调幅波频率无关。
Using infrared system the apparatus of non-touching at limited-area to monitor the hardening temperature at site is produced for high-frequency induction heat treatment.
利用红外测温原理，研制出高频热处理时的小目标非接触式在线动态监控淬火件温度的装置。
In this paper, PC-bus industrial computer being as a kernel, the intelligent control system is demonstrated for continuous induction heat treatment of extraction oil bar.
本文针对抽油杆的连续感应中频热处理过程，介绍了以PC总线工控计算机为核心的智能控制系统。
On the basis of analysing the failure main technological parameters in induction heating are discussed in order to further improve the quality of induction-heat treatment parts.
在分析这些事故的基础上，讨论感应加热中几个主要工艺参数，以进一步提高感应加热处理零件的质量。
Since the invention of the induction heating power supply, it has been rapidly applied to the every area of national production for its advantages in the industrial heat treatment.
自从感应加热电源问世以来，由于其在工业热处理等方面的各种优点，迅速地应用到了国民生产的各个领域。
Based on these equations, continuous induction heat treatment of the thick wall tube, including heating, quenching and tempering, is simulated by finite element method on ANSYS software.
基于这些方程在ANSYS软件上实现了对厚壁筒形工件连续感应热处理的计算机模拟计算。
The effect of preheating treatment process of cold rolls on induction heat quenched structures and the effect of heating temperature and time on structure and hardness have been studied.
研究了轧辊的预备热处理工艺对感应加热淬火组织的影响，感应加热温度和时间对组织和硬度的影响。
In process of continuous induction heat treatment, there are heavy electromagnetic disturbance, nonlinearity. heavy noise and variable parameters. The existed methods of control are difficult.
连续感应热处理过程存在着强电磁场干扰、非线性、强噪声和过程参数多变性，传统的控制方法难以奏效。
In this way, the single oscillator circuit part (310) and the single induction heating coil (200) are used to effectively induction heat the object (201) by means of the dual frequency resonance.
通过一个振荡电路部分(310)采用一个感应加热线圈(200)以两个频率进行谐振对被加热物体(201)进行高效率的感应加热。
Automatic computer control, without special operation, can be set at a time automatic work, saving energy, reduce heat loss, continuously for drinking water, automatic induction filling water.
全自动电脑控制，无需专人操作，可在设定的时间段自动工作，节约能源，减少热损，可连续供开水，自动感应补水。
Principle, characteristics and application of technique up -to -date of pipe bending such as zero radius bending, MF induction bending, heat stress bending and Laser forming have been expounded.
论述了零半径弯曲、中频感应弯曲、热应力弯曲及激光弯曲成形等管材弯曲加工最新技术的原理、特点和工程应用。
Grinding hardening, the technology of hardening steel piece surface with grinding heat instead of high or medium frequency induction hardening heat, can integrate grinding surface hardening.
磨削强化处理技术是利用磨削热替代高、中频感应淬火热源对钢件表层进行强化处理，将磨削加工与表面强化合为一体。
This paper demonstrates residual stress of induction quench parts and personal views about stress distribution of flange corner heat treatment, truck half axle material and depth of hardened layer.
论述了感应淬火零件的残余应力形态，并对载货车半轴的材料、硬化层深度及法兰圆角淬火层分布提出了个人见解。
The high-power commercial Induction Cooker can not be placed in the vicinity of other sources of heat, cooling the air temperature must be below 45degrees.
大功率商用电磁炉不能放置在其他热源附件，冷却空气的吸入温度必须在45度以下。
Figure induction coil surface hardening of medium frequency current flowing through the great but will heat the surface of the workpiece.
表面淬火如图感应线圈流过很大的中频电流而将工件表面加热。
PE aluminum foil seal film compose of sealing layer, aluminum foil and glue layer. Through heat sealing or induction sealing.
PE铝箔封口膜由密封层、铝箔、胶粘层组成，适用于电磁感应封口，也可用于热封封口。
The application, influence factors and process control of four kinds of heat treatment methods including tempering, carburizing, nitriding and induction quenching are analyzed.
对齿轮的调质、渗碳淬火、渗氮及感应淬火四大热处理工艺的应用范围、影响因素及工艺控制要点进行了分析。
Typical materials include ductile iron castings or steel forgings. Most crankshafts require some form of heat treating including case hardening, nitriding and induction harden.
特殊的材料包括球墨铸铁和钢煅品，大部分机轴经过热处理，表面硬化、渗氮和感应淬火。
Typical materials include ductile iron castings or steel forgings. Most crankshafts require some form of heat treating including case hardening, nitriding and induction harden.
特殊的材料包括球墨铸铁和钢煅品，大部分机轴经过热处理，表面硬化、渗氮和感应淬火。
应用推荐