In the weaving process, the company has the most advanced Belgium gamma X rapier loom more than 250.
在织造工序，公司拥有最先进的比利时必佳乐伽马x剑杆织机250多台。
In the weaving process, yarns should be added (or reduced) in every warp layer in correspondence with the increase (or decrease) of the fabric diameter.
在织造过程中，应随管道直径的增加(或减小)，相应地增加(或减小)各层的经纱根数。
Before weaving, the warp threads are coated with a size (a dressing) to enable them to withstand the mechanical stresses involved in the weaving process.
在织布以前，经纱上都附有一种浆，这种浆使纱线在织布的过程中能够承受织布机所造成的机械压力。
Because RMC does not include a process runtime environment (I discuss this limitation in the "RMC wish list" section), it can only support source level weaving.
由于RMC并不包括一个过程实时环境(我将在“RMC愿望列表”小节中讨论这个限制)，所以它只能支持源级的编排。
In other words, any aspects specified on the aspectpath are made available to the weaving process, just as if they were present in source form in the project.
换句话说，在aspectpath上指定的方面对编织过程是可用的，就好像它们存在于项目源目录中一样。
Strength, equal intervals each cage is about 1M, the spacer, and in each block of stone cage galvanized wire mesh weaving process, and weft diameter.
强度，每个笼子1M左右的间隔相等，使间隔物，并在每一块镀锌丝网石笼编织过程中，而纬纱的直径。
Advanced pure cotton knitting yarn is different from other weaving yarns in weaving process, fabric structure, and fabric styles. The requirements of yarn quality have its own specialty.
由于高档纯棉针织纱在织造工艺、织物结构及织物风格等方面有别于其他机织类用纱，所以对纱线的质量要求有其特殊性。
This paper introduced the characteristics of milk protein fiber, the technologies and key points in blended spinning, weaving and dyeing process.
阐述了牛奶蛋白纤维的特性以及其混纺织物在纺纱、织造、染色工艺中的技术要点。
The harm of the yarn hairiness for weaving process and some questions in previous researching about it i described.
介绍了纱线毛羽在织造过程中的危害及以往研究中存在的问题。
And the application of the yarn in the weaving looms were weaving, Preliminary study of the weaving process on the fabric and style of performance, as the basis for future research.
并且应用该纱线在机织织机上进行了织造，初步探讨了机织工艺对织物性能及风格的影响，为今后的研究奠定了基础。
This paper analyses the problems in weaving process of pure ramie yarn, discusses the sizing process and brings forward a new one, which improves the sizing quality and the weaving efficiency.
本文分析了纯苎麻纱在织造加工中存在的问题，并针对这些问题提出了改进措施，制定了新的浆纱工艺路线。
In this paper, the causes of warp breaking are investigated through practically observing the weaving process.
本文就织机上引起断头的原因进行了探讨。
The process requirements and key technology in winding, warping, dyeing and weaving are discussed.
讨论了络筒、整经、浆染、织造工序的工艺要求和关键技术。
Research in textile production, spinning and weaving and its poison in the ware, harmful material comes from the fiber raw material and process primarily medicine or help.
在纺织品领域的研究表明，纺织及其制品中的有毒、有害物质主要来自于纤维原料、加工药剂或助剂。
Presents the necessary for effective weaving of heavy-weight silk fabrics in such respects as technological process, design organization, equipment innovation, etc.
从工艺路线、组织设计、机器改进等方面，介绍了制织厚重真丝绸应采取的措施。
Traditional jacquard CAD system has reached a very high level in jacquard weaving process, but the image preprocessing couldn't meet the ever-increasing customer demands.
传统的纹织CAD系统在纹织工艺方面已经达到了很高的水平，但是在图像的预处理方面却难以满足客户越来越高的要求。
The characteristics of bamboo fiber are introduced. Some points to pay attention in spinning and weaving process are expounded.
文章介绍了竹原纤维的特性，阐述了竹原纤维在纺纱织造生产中应注意的一些问题。
Package dyeing is the key link in yarn-dyed weaving process.
筒子染色是色织工艺中的重要环节之一。
The problems existed in the process of weaving two-stretch elastic fabric on air-jet loom are analyzed, and the solutions are presented.
文章分析了喷气织机在织造双向弹力织物时，各工序应注意的问题及解决措施。
The paper introduced the process of weaving super fine tex high density combed cotton fabric in air-jet loom.
文章介绍了喷气织机生产细号高密精梳棉织物生产过程。
Based on the features of pure cotton of extra high count fabric, this paper analyses the difficulties in weaving process and puts forward some technical measures in practice.
根据纯棉特高支织物的特点，分析了织造工艺的难点，提出了在生产实践中应采取的技术措施。
The design in this paper comes from a practical project of a spinnery. Our design and control object is the electrical spindle motor of weaving producing process.
本文的设计是来自于企业的一个实际的工程应用项目，设计控制对象为纺丝机电锭电机。
For thousands of years, bamboo utilization stays in the simple process to produce rough productions such as cutting, weaving and using original bamboo.
千百年来竹材利用长期停留在劈篾编织、原竹利用或经过简单的粗加工生产初级产品。
In this paper, the wool-like fabric designing and weaving process from modified polyester yarn in cotton mill were studied and put forward.
本文对棉纺行业生产差别性涤纶短纤维仿毛织物的织造工艺和织物设计进行了研究，提出了仿毛织物的织造工艺和织物设计方法。
Figure weaving can be accomplished by using various attachments above or on the loom to increase the control of warp yarns and provide for a variety of changes in the shedding process.
花式组织的织造可以依靠位于织机上方或织机上的附件来完成，这些附件加强了对经纱的控制，使开口过程产生多种变化。
The pulp formula, the starching process and factors should be noticed in the course of weaving are the key technology.
重点介绍了生产过程中比较关键的浆料配方和上浆工艺及织造过程中应该注意的问题。
It is proved that the sizing device is rational in structure and stable in performance and the sizing quality can meet the requirements of weaving process.
结果表明，S432型浆纱机的上浆装置结构合理，性能稳定，浆纱质量完全满足织造要求。
Adhesive action of a sizing agent to a fibre is a basic concept in sizing engineering, as only warp sizing with good adhesion is able to protect warp yarns during the weaving process.
浆料对纤维的粘附是浆纱工程的一个基本问题，只有粘附性好的浆料才能有效地保护经纱。
The present invention is the weaving process of stitching weft-knitted alternative fabric with surface warp inserting and weft inserting structure of certain thickness in a weft knitting machine.
一种在纬编针织机上进行具有一定厚度的，表层衬经衬纬结构的成圈型纬编间隔织物织造方法。
The present invention is the weaving process of stitching weft-knitted alternative fabric with surface warp inserting and weft inserting structure of certain thickness in a weft knitting machine.
一种在纬编针织机上进行具有一定厚度的，表层衬经衬纬结构的成圈型纬编间隔织物织造方法。
应用推荐