The mechanical properties of in situ composite have been tested and then, the reinforcing mechanism of the composite has also been studied.
通过综合分析微观结构对力学性能的影响，探讨了原位复合材料的增强机制。
Preparing in situ composite by blending thermoplastic polymer (TP) with thermotropic liquid crystalline polymer (TLCP) is one of important approach to reinforce polymer.
用热致液晶聚合物(TLCP)与热塑性塑料(TP)共混制备原位复合材料是增强高分子的重要途径。
The in-situ active damage detection of composite structure can be implemented using surface-bonded piezoelectric patches with signal processing based on vibration analysis.
复合材料容器结构的在线损伤检测可以通过粘贴在结构表面的压电智能材料和基于振动分析基础上的信号处理来完成。
Ceramic particle of in situ synthesis avoids pollution and wettability existing in casting technique, so it is valuable to fabricate Fe matrix composite with better properties.
增强体原位合成避免了其污染问题，也解决了熔铸过程中存在的两相润湿性问题，有利于制备性能更好的复合材料。
The room temperature and high temperature mechanical properties of the composites were studied, and the fracture behavior of the composite was investigated by in-situ SEM observation.
测试了材料的室温与高温性能；通过SEM动态原位拉伸试验研究了复合材料的断裂过程；
About the research development of liquid crystalline polymer and it's in? Situ composite material was summarized.
用热致液晶聚合物微纤增强热塑性树脂制备原位复合材料是增强热塑性树脂的一个新途径。
In this paper, by combining in-situ fibrillation with shear force field together to enhance their reinforcement ability, the properties of the composite are expected t.
原位成纤作为一种重要的提高聚合物复合材料力学性能的方法而受到广泛关注。
Metal matrix composite layer reinforced in situ ZrC particles was formed by laser cladding overlapping on the medium carbon steel.
采用激光熔覆搭接技术，在中碳钢基体上制备出原位析出的颗粒增强金属基复合材料表层。
Metal matrix composite layers reinforced by in situ WC particles were formed by laser cladding using pre pasted 1.
采用激光熔覆搭接技术，在中碳钢基体上制备出原位析出的颗粒增强金属基复合材料表层。
The rapidly solidified in-situ wear resistant composite materials reinforced by hard titanium nitride were successfully fabricated in the laser modified surface layer.
在激光表面改性层中成功地制得了以高硬度氮化钛为增强相的新型快速凝固“原位”耐磨复合材料。
The Metal Matrix composites, prepared by in-situ reaction composite technology, can normally achieve higher mechanical properties than other traditionally prepared composites under the same condition.
利用原位反应合成法制备金属基复合材料，在同等条件下，其力学性能一般都高于强制法制备的复合材料。
The microstructure of the Fe-based clad composite coating reinforced by in-situ particles was investigated, using laser clad FeCSiB powder added with niobium and titanium.
研究了单独添加不同含量的铌与复合添加铌、钛时激光熔覆铁基原位生成颗粒增强复合涂层的组织特点。
This paper has reviewed the advance of preparing the composite materials, involving mainly the in-situ and post syntheses.
概述了该类催化剂合成方法的进展情况，主要介绍了原位合成法和后合成法。
Polyaniline (PANI) composite films were prepared from aniline monomers by in situ polymerization, acid-doping and layer-by-layer self-assembly through the electrostatic force.
从苯胺单体出发，通过原位聚合、现场掺杂以及基于静电力的层层自组装制备了聚苯胺复合膜。
Through the load experiments in-situ, the deformation and bearing capacity of the prestressed composite plate are studied, and the problem of the crack resistance design is also discussed.
通过预应力混凝土迭合板的现场加载试验，探讨此类构件的变形承载能力及存在的抗裂设计问题。
This paper summarizes the research progress of nylon 6 in-situ composite civilly and abroad in recent years.
综述了近年来国内外尼龙6原位复合材料的研究进展。
A new forming technology on the colloidal casting and in situ coagulation of the multiphase composite ceramics is presented.
提出了多相复合陶瓷胶态注模原位凝固成型新工艺。
Under the optimal conditions, the CdSe nanoparticles with uniform size can be well in situ modified on the surface of CNTs to produce nano-composite materials with good fluorescence properties.
在该条件下，尺寸均一的硒化镉纳米粒子能够均匀地原位修饰在碳纳米管表面上，同时所得纳米复合材料具有良好的荧光性能。
Systematic in situ tests were carried out to study the bearing capacity of composite foundation with cement-soil piles in soft clay.
通过现场足尺试验，研究了软土中水泥土群桩的承载力特性。
PLA-PCL/ramie fabric composite was prepared by means of in-situ polymerization.
采用原位聚合法制备了聚乳酸-聚已内酯（PLA-PCL）／苎麻复合材料。
The method has simple operation and cheap raw materials and USES cheap water as a polymerization medium to composite carbon materials and the tungsten carbide in situ.
本发明的方法操作方便，原料廉价，以廉价的水为聚合反应介质，使碳材料和碳化钨原位复合。
The polyimide nano-composite films with different concentrations of carbon nano-tube were prepared by means of ultrasonic blending and in- situ polymerization.
以超声分散塬位聚合的方法制备出不同碳纳米管含量的碳纳米管，聚酰亚胺功能复合材料膜。
A new forming technology on the colloidal casting and in situ coagulation of the multiphase composite ceramics...
提出了多相复合陶瓷胶态注模原位凝固成型新工艺。
PU/organomontmorillonite nano-composite(OMMT) was prepared by in-situ intercalative polymerization.
采用原位插层聚合法制备PU/有机蒙脱土（OMMT）纳米复合材料。
And the relationship between thermal stability and strengthening mechanism of in-situ composite alloy were also analyzed.
同时分析了自生复合合金热稳定性与强化机制的关系。
A 3d model was established for the composite foundation with cast-in-situ concrete thin-wall pipe piles. It was shown by the results of finite element analysis that the present model was reasonable.
建立现浇薄壁管桩复合地基三维模型，通过有限元模拟，与现场静载试验结果对比，表明建立的模型是可行的。
A 3d model was established for the composite foundation with cast-in-situ concrete thin-wall pipe piles. It was shown by the results of finite element analysis that the present model was reasonable.
建立现浇薄壁管桩复合地基三维模型，通过有限元模拟，与现场静载试验结果对比，表明建立的模型是可行的。
应用推荐