A new method to control elastic yielding wheel in grinding process is presented.
本文提出了一种控制磨削过程中弹性退让的新方法。
The model embody tile position and shape and other factors in grinding process to grinding load relation.
该模型反映了砖的形态等因素与磨削力的关系。
In grinding process of civil cutter, crack is easy to happen by the reason of grinding, and it causes gap.
民用刀剪在加工过程中，由于磨削等原因，容易产生裂纹，引起刀剪刃口卷裂或产生缺口。
Measure the grinding force in grinding process and compute the grinding energy ratio, analyzing the grinding mechanism.
试验还进行了磨削过程中磨削力的测试和比磨削能的计算，分析了陶瓷材料的去除机理。
A feasibility analysis is made on the method by testing the temperature in grinding process and monitoring grinding burn.
并通过实际磨削测温实验及烧伤跟踪实验对该方法的可行性进行了分析。
Combined with the study of constant force grinding, a self-study method on fuzzy control rules in grinding process is suggested.
结合恒力磨削的研究，提出了一种基于磨削数据的模糊控制规则学习方法。
Comminuting effect in grinding process by using cast iron segment as fine grinding media is studied with comparison to steel ball.
采用普通钢球作为对比，研究磨矿过程中以铸铁段为细磨介质的破碎效果。
The basic rules in grinding process has been derived, so as to carry out the proper adjustment and controlment for the circular grinding machine.
导出了磨削过程的基本规律，以便对外圆磨床进行正确调整和控制；
The change in particle size distribution of fly ash in grinding process and its influence on the activity of fly ash are presented in this paper.
研究了粉煤灰在机械磨细过程中粒度分布的变化规律，分析了磨细灰的粒度分布特征对其活性的影响。
Pointing at problems produced in grinding process of bearing rings with double raceways, the dynamic control grinding process method is put forward.
针对双滚道滚动轴承套圈磨削加工过程中存在的问题，提出了动态控制磨削加工法。
In the paper, fuzzy neural network method is used to control the size accuracy in grinding process and fuzzy inference BP-network model is produced.
采用模糊神经网络方法进行磨削加工尺寸精度的控制，给出了模糊推理BP网络模型。
The production mechanism of the surface residual stress producing in grinding process is the combined effect on extrusion stress and the cutting stress and the thermal load.
在磨削加工过程中产生表面残余应力，其产生机理是磨粒刃作用引起的挤压应力和切削应力及热应力的综合作用效应。
In grinding process, the dimensional precision of work piece shows its uncertainty and non-linearity because of the machine tool property, the grinding wheel, the clamp, etc.
在磨削加工中，受机床、砂轮、工件、夹具等众多因素的影响，加工工件的尺寸精度和精度一致性呈现出不确定性和严重的非线性。
The grinding strengthen technology is a new process engineering of surface heat-treatment, which uses a mass of grind heat produced in grinding process to handle workpiece materials.
磨削强化技术是利用磨削加工过程中产生的大量磨削热对工件材料进行表面热处理的新工艺技术。
The grinding strengthen technology is a new process engineering of surface heat-treatment, which USES a mass of grind heat produced in grinding process to handle workpiece materials.
磨削强化技术是一种集磨削加工与表面淬火于一体的新技术，可对钢件表层进行强化处理。
The paper introduces action of dispersant in grinding process of calcium carbonate, and analyzes two important characteristics and its mutual relation in grinding process of calcium carbonate.
本文介绍了分散剂在碳酸钙研磨中所起的作用，并分析了研磨碳酸钙的两个主要特性及其相互关系。
In the past, Spain would have sought improved competitiveness by devaluing its currency. But now it's on the euro - and the only way forward seems to be a grinding process of wage cuts.
在过去，西班牙可以选择本币贬值来促进竞争力，但现在，全是欧元了——唯一的出路似乎只有痛苦的降薪，这一过程在最好的时期也是很困难的，在现在，很有可能就是无法想像的痛苦了。
In the process of bearing grinding, the accuracy of bearing parts were first assured.
在轴承的磨削加工过程中，首先要保证的是零件的加工精度。
In order to get low surface roughness and high material remove rate, basic research on the optimization of process parameters in creep feed ultrasonic grinding engineering ceramics was conducted.
为了在加工中获得良好的表面质量和大的材料去除率，本文开展了蠕动进给超声磨削工程陶瓷参数优化的基础研究。
In the processing process in the bearing ring, through to the grinding crack mechanism analysis, the effective measure of control grinding crack was adopted.
在轴承套圈的磨加工过程中，通过对磨削裂纹机理的分析，采取有效的措施控制磨削裂纹的产生。
System in mining field pressure-blasting machine site, widely used in grinding anterior process, it can produce a lot of powder grinding, reduce the high cost of grinding the load.
制砂机现场在矿业领域，广泛地应用于磨矿前段工艺，它能产生大量的粉矿，减少高成本的磨矿负荷。
In the process of grinding, the grinding efficiency may be improved and the energy consumption may be reduced with grinding AIDS.
在磨矿过程中，添加一定的助磨剂，可以提高磨矿效率，提高磨矿生产能力，减少磨矿能耗。
In view of the great pendulum difference in the process of grinding, an analysis is made and a solution is put forward.
针对钻铰刀在刃磨过程中出现的摆差偏大的问题，进行了分析，并提出解决方案。
This paper analyzed the effect of pressure, water flow, and time factors in ink grinding process on the grinding quality of ink, and then analyzed the influence to the offset printing density.
从油墨研磨的角度出发，分析油墨研磨过程中压力、水流量、时间因素对研磨出来的油墨质量的影响，进而分析其对胶印印刷品密度的影响。
The mathematical model is established for the dynamic distributions of dimension errors in bearing grinding process by means of the Grey theory.
基于机械加工误差的特点，利用灰色系统理论建立轴承磨削加工过程尺寸误差动态分析的数学模型。
Meanwhile, the crushing effect and saving energy of the equipment working in process of grinding ironstone are researched, all these lay a foundation for the further study of the technology.
同时，对高压辊磨机粉碎铁矿石的粉碎效果和工艺节能性也进行了试验研究，为该技术的进一步研究奠定了基础。
The difficulty in NC grinding is that the size of the work piece cannot be invariable because the grinding wheel will be abraded continuously in the grinding process.
数控磨削加工的难点在于，由于砂轮在磨削过程中是不断磨损的，因此使得被磨工件的加工尺寸不能恒定。
The difficulty in NC grinding is that the size of the work piece cannot be invariable because the grinding wheel will be abraded continuously in the grinding process.
数控磨削加工的难点在于，由于砂轮在磨削过程中是不断磨损的，因此使得被磨工件的加工尺寸不能恒定。
应用推荐