Nonverbal thinking, a central mechanism in engineering design, involves perceptions, the stock-in-trade of the artist, not the scientist.
非语言思维是工程设计中的一个核心机制，它涉及的是感知，是艺术家的惯用手法，而不是科学家。
This strength designing method can be used in engineering design.
本文所提出的强度设计方法可以在工程上使用。
In engineering design, the system of flow distribution pipe is very complex.
在工程设计计算中，分配管系统是个十分复杂的过程。
Distribution of earth pressure is an important problem in engineering design.
土压力分布是支挡工程设计的重要问题。
The values from these formulas have been proven applicable in engineering design.
根据计算结果，在井下巷道工程实际应用中进行对比，证实了它的可靠性。
This formula is simple and practicable, and it can be used for reference in engineering design.
此公式简便实用，可供工程设计参考使用。
The system can be used instead of import products and has good prospects in engineering design.
该系统作为替代进口产品，在国内公共广播系统工程中有着广泛的应用前景。
This paper discusses the electrical energy saving technology applications in engineering design.
本文探讨了电气节能技术在工程设计中的应用。
Signomial geometric programming (SGP) problems often occur in engineering design and management.
符号几何规划(SGP)问题经常出现在工程设计和管理中。
An example of the finite element equivalent stress method in engineering design practice is described.
介绍有限元等效应力法在拱坝设计中的运用实例。
In engineering design, the natural axis is located assumably the extreme row which is directed by the moment.
工程设计中，通常认为普通螺栓群弯矩受拉时，中和轴在弯矩指向一侧最外排螺栓处。
It is quite often to meet with the problem of local interference in engineering design of long distance pipeline.
在长输管线工程设计中经常遇到局部干扰问题。
This paper introduces how to use the pressure type thermometer in engineering design skillfully by means of comparison.
文章经过比较提出了在工程设计中如何应用压力式温度计。
The sophisticated surface modelling is one of problems in engineering design, and it is a difficult problem to engineers.
复杂表面造型是工程设计中经常遇到的问题之一，也是工程设计人员感到棘手的难题。
The Undok pulverized coal gasification technology, its characteristics and application in engineering design were introduced.
介绍恩德粉煤气化工艺、技术特点及在工程设计中的应用。
The problems of notice in engineering design and in negotiation of order contract for air-cooled equipment are analyzed and explained.
还对工程设计中与电气相关的问题以及空冷设备订货合同谈判中应注意的问题作了说明。
Progresses in engineering design, technical characteristics and engineering development of domestic hydrocracking units were summarized.
总结了近年来国内加氢裂化装置的设计概况、技术特点以及工程开发的新进展。
The proposed calculation method and obtained results in this paper could be referred to in engineering design, calculation and application.
本文提出的计算方法和计算结果可供设计、计算和应用时参考。
While seeking the scheme of minimum structural volume in engineering design, the optimization issue ought to be considered at the same time.
在工程设计寻求结构体积最小方案时，应同时考虑啮合角的优化问题。
Automatic generation of finite element mesh is an important prerequisite for the application of finite element method in engineering design.
有限元网洛的自动生成是有限元方法在工程中应用的重要前提。
Study on Strength PropertyThe shear strength of EPS beads-mixed lightweight soil is an important property in engineering design and analysis.
强度特性研究抗剪强度是EPS颗粒混合轻质土的重要工程性质，对工程设计和计算具有重要意义。
Therefore, the systematic study of short-shear wall structural performance in engineering design has become an urgent need to resolve the issue.
因此，系统地研究短肢剪力墙结构的性能已成为工程设计中迫切需要解决的课题。
This paper presents a brief description of rotor type oxidation ditch, it' s design criteria, general layout and experience in engineering design.
本文叙述转刷型氧化沟简况、设计参数、布置方法及工程设计中点滴经验。
As the awareness and demand of safety increasing, the concept of safety margin appears more and more in engineering design and People's Daily life.
随着人们对安全认识和需求的不断提高，安全裕度的概念越来越多受到工程设计界及人们日常生活的关注。
The research results in the dissertation can be used in engineering design of fault diagnosis and fault-tolerant control of fin stabilizer systems.
本文的研究工作可为减摇鳍故障诊断与容错控制工程设计应用。
Some patented techniques have been applied in engineering design to improve the efficient of unit operation and get more social and economic benefits.
提出了点源控制与综合治理相结合的工业废水治理措施，并在工程中应用专利技术，提高单元反应效率，社会、经济效益显著。
In recent years, as a new design tool, virtual prototyping technology is increasingly used in engineering design and mechanical properties of the system.
近年来，虚拟样机技术作为一种新兴的设计手段，被越来越多地应用于工程设计和机械系统性能研究。
The running environment of the computer room in Engineering Design Center of Sichuan University and the trend of development of similar system are analyzed.
分析了四川大学工程设计中心计算机机房现有系统的特点、运行环境，明确了要研制系统的功能、性能、运行需求；
Numerical calculations indicate that the transverse shear stresses at contact surfaces between face layers and core are very important in engineering design.
数值计算表明，夹层板面层和芯层粘结处的层间剪应力在工程设计中是十分重要的。
Numerical calculations indicate that the transverse shear stresses at contact surfaces between face layers and core are very important in engineering design.
数值计算表明，夹层板面层和芯层粘结处的层间剪应力在工程设计中是十分重要的。
应用推荐