Electrical loads can be of three types: impedance load, AC voltage sink load or AC current sink load.
电力负载可以分作三种类型：交流岱电压吸收负载或交流电流吸收负载。
Examples of impedance load are electromagnetic ac relays. electromagnetic pick up and lift equipments.
有一些阻抗负载的实例，他们是电磁交流继电器。
Proper impedance load can reduce RCS effectively, meanwhile antenna's gain and radiation efficiency are not affected.
适当的阻抗加载能有效降低天线rcs，同时还能保证天线的辐射性能。
The actual signal distortion levels depend upon input and output signal amplitude, as well as the output load impedance.
实际的信号失真水平取决于输入和输出信号的幅度，以及输出负载阻抗。
The effect on the generator excitation magnetic field is different when the capacity and power factor of load are different, and the effect on the internal impedance voltage drop is different, too.
而不同容量的负载，以及负载的不同功率因数，对同步发电机励磁磁场的作用是不同的，对同步发电机的内部阻抗压降的作用也是不一样的。
We can also see that because damping factor is a ratio that requires the load impedance to compute it must be stated against some known impedance to be meaningful.
我们还可以看到因为阻尼因子是一个比率值，而且需要负载阻抗已知才能够进行计算，所以阻尼因子必须和某一已知的阻抗同时具明才有意义。
We can also see that because damping factor is a ratio that requires the load impedance to compute, it must be stated against some known impedance to be meaningful.
我们还可以看到因为阻尼因子是一个比率值，而且需要负载阻抗已知才能够进行计算，所以阻尼因子必须和某一已知的阻抗同时具明才有意义。
The main reasons of the breakdowns are the changes of load impedance and disturbance signal.
认为负载阻抗的变化和干扰信号是造成故障的主要原因。
Using snake structure at the end of the planar monopole and adding load at proper position can decrease the size greatly and broaden the impedance bandwidth.
在平面单极子天线的末端采用蛇形结构，并在适当的位置加载，将大大减小天线尺寸，扩展阻抗带宽。
Secondary load impedance of a current transformer(CT) has great influence on the error of the CT.
电流互感器二次负载阻抗对电流互感器误差有较大的影响。
The load obtains the maximum power transmission when loaded impedance and power source internal resistance for conjugate match in sine stable state electric circuit.
在正弦稳态电路中，当负载阻抗与电源内阻抗为共轭匹配时负载获得最大功率传输。
This paper concludes general calculative regularity of readings of two-wattmeter method using the impedance Angle of balanced load.
本文归纳出利用对称负载的阻抗角，计算二瓦特计法表读数的一般规律。
Because the clamp effect of DC voltage source, AC side output the rectangular wave voltage waveform, and it has nothing to do with the load impedance Angle.
由于直流电压源的钳位作用，交流侧输出电压波形为矩形波，并且与负载阻抗角无关。
In addition, impedance is important to achieve a proper load division in the parallel operation of transformers.
此外，要实现变压器并联运行时的恰当负荷分配，阻抗值是重要的。收藏。
The design method of the high voltage and the fast response time pulse transformer used in the condition of low load impedance was introduced.
介绍了工作于低阻抗负载下的高压大电流快响应脉冲变压器的一种设计方法。
The problem of impedance matching must be considered in order to transmit the signal of generator to the load efficiently and distortionless by transmission lines.
为了使传输线能够将信号源的信号高效不失真地传送到负载，需要考虑阻抗匹配问题。
The model uses the effective impedance of the microstrip line as the value of matched resistive load and assign it into the RL mesh region in a proper proportion.
该模型将微带线的有效阻抗作为匹配负载电阻，然后按适当的比例分布到端接面的网格中。
This paper presents a novel concept for system integration at system level, which is to select output impedance of source converter and input impedance of load converter as objects of standardization.
该文提出一种新颖的系统集成的观点，即从系统级的高度将分布式供电系统中的源变换器的输出阻抗和负载变换器的输入阻抗作为标准化研究的对象。
Also, the relationship between the input impedance and load impedance of the waveguide is discussed.
讨论了波导管输入阻抗与负载阻抗之间的关系。
The algorithm does not need fault type identification, and its accuracy is not affected by fault resistance, system impedance, pre-fault load current and shunt capacitance.
算法无需故障类型判别，不受系统阻抗、故障电阻、负荷电流以及分布电容的影响。
The detectors in one example measure switch voltages and the estimation circuit estimates power delivered to the load according to a switch voltage and impedance between two nodes of the switch.
在一个实例中，所述检测器测量开关电压，以及所述估计电路根据开关电压和该开关的两个节点之间的阻抗来估计输送到负载的功率。
If you change the reflected load impedance, you will find yet another optimum spot.
如果你改变了反映负载阻抗，你会发现又一个最佳位置。
The switch impedance may be provided during calibration using a reference load.
开关阻抗可以在校准期间，使用参考负载提供。
In the way of analyzing the impedance of transducer with float, study on the work law of transducer with load.
通过对负载条件下换能器阻抗的分析，研究了负载条件下换能器的工作规律。
A new conception of power per unit impedance is defined and the basic equation to express the variation of load voltage magnitude with the variation of its dynamic equivalent impedance a.
定义了单位阻抗功率的新概念，推导了电压幅值随其等值阻抗和单位阻抗功率变化而变化的基本方程序。
Switching boost converter's load effect has great effect on input phase, stability of small signal, ratio of input and output impedance, and the ratio of Boost converter's output efficiency.
开关变换器的负载效应对变换器升压比、输出效率、输入相位差、小信号稳定度、输入与输出阻抗之比等有着非常重要的影响。
The characteristic of constant current type load is more favorable for voltage stability than constant power type load. The characteristic of impedance type load does not affect the voltage stability.
就电压稳定性而言，恒功率型较恒电流型更易失去稳定性，而一般恒阻抗型负荷不存在电压稳定性问题。
When impedance are mismatched, the transmitted signal is not completely absorbed by the load and a portion is reflected back into the transmission line.
若阻抗失配，发送信号会不完全地为负载所吸收的同时又部分地反射回到传输线。
This changing "reactive" load causes the amp output level to change with frequency and changes in speaker impedance (a dynamic thing that changes as the speakers are driven harder).
这种变化的“反应”负荷导致功放输出水平的变化与频率变化，音箱阻抗（动态改变的内容作为扬声器驱动更难） 。
This changing "reactive" load causes the amp output level to change with frequency and changes in speaker impedance (a dynamic thing that changes as the speakers are driven harder).
这种变化的“反应”负荷导致功放输出水平的变化与频率变化，音箱阻抗（动态改变的内容作为扬声器驱动更难） 。
应用推荐