During my graduate design term, I have taken part in design of CMOS image sensor system and analog chain from pixel to analog to digital convertor.
本人在毕业设计期间参加了CMOS图像传感器系统架构设计和从感光电路到模数转换器的整个模拟链的设计工作。
In this system, a CMOS image sensor system which developed by ourselves is used for video capturing. Also we describe the full process of the image capturing and image processing.
提出了一种利用自主开发的CMOS图像传感器系统在显微镜上对细胞图像的视频采集、图像捕捉以及图像处理的新方法。
In the developed CCD image sensor system, real-time collecting and disposing the welding temperature field image is realized by means of using the method of colorimetric temperature measure.
所研制的CCD图像传感器系统,通过采用比色测温的方法,实现了对焊接温度场图像的实时采集与处理。
The VigilX system is based on distributed sensor technology combined with advanced image processing algorithms.
VigilX系统基于分布式传感器技术,并结合了先进的图像处理算法。
The vision system fires a strobe at the appropriate moment and the image of the bottle is captured on the sensor.
可视系统在适当的时候激发闸门,同时瓶子的图像在传感器上捕捉到。
The system design and implementation methods of timing control circuit for a new CMOS image sensor are proposed.
本文主要论述了CMOS图像传感器时序控制电路的系统设计和实现方法。
External sync CCD data acquisition System consists of linear CCD image sensor with external sync function and high speed data acquisition device.
外同步CCD数据采集系统由具有外同步功能的线阵CCD图像传感器和高速数据采集器两大部分组成。
From the result of experiment, the vision sensor system get the image that can reflect the weld track of TIG Deposit surfacing welding clearly.
从实验结果来看视觉传感系统所得到的图像能够清晰反映出TIG熔敷堆焊的焊接轨迹。
The system design and implementation methods of timing control circuit for anew CMOS image sensor are proposed in the paper.
本论文主要论述了CMOS图像传感器时序控制电路的系统设计和实现方法。
The traditional experimental observation system of Newtons ring is rebuilt, an embedded subsystem of image collecting and processing based on CMOS sensor and DSP is added.
对传统的牛顿环实验观测系统进行改造,增加基于CMOS传感器和DSP的图像采集与处理的嵌入式子系统。
The principle of a measurement system used to inspect the wheel tread contour of locomotives and cars with linear CCD image sensor is introduced.
讨论了一种应用线阵CCD图像传感器测量火车车轮踏面磨损量的检测系统; 分析了系统的测量原理;
Based on image sensor, the solar position checking system was established.
研究一种基于图像传感器的太阳方位检测系统。
The image of experiment shows that the optimized vision sensor system can achieve the aim of getting the TIG deposit surfacing welding information.
通过实验采集的图像,可见TIG熔敷堆焊视觉传感系统的优化基本能够达到TIG熔敷堆焊的信息传感目的。
Mechanical instrument of iris capturing system and CMOS image sensor are described.
采集系统的机械装置结构的确定,CMOS图像传感器的描述。
The general theory and methods from geometrical optics to measure the dimension of an object were applied to design a diameter measuring system, which was based on a linear array image sensor.
运用几何光学测量物体尺寸的理论和方法,设计了一种基于线阵图像传感器的线径测量系统中的成像系统。
The optical system of the micro digital sun sensor consists of APS CMOS image sensor and MEMS based diaphragm with pinhole array structure.
微型数字式太阳敏感器光学系统由APSCMOS图像传感器和基于MEMS工艺的小孔阵列式光线引入器组成。
An intelligent coated plate thickness measurement system based on a semiconductor laser diode as light source and a CMOS image sensor is introduced.
介绍了一种以半导体激光器为光源,以新型CMOS面阵图象转换器件为传感器的智能型覆铜板测厚系统。
This system USES large area array CMOS sensor as the image device, and makes the image motion compensation by reflector scanning, thus to obtain clear digital images during flight of UAV.
该系统采用大面阵CMOS图像传感器作为成像器件,通过反射镜扫描进行像移补偿的方法,实现无人机飞行状态时清晰地数字成像。
The hardware and operating principle of this system are introduced, and the structure, principle and characteristics of S3924-512Q image sensor are analyzed in detail.
介绍了系统的硬件构成及工作原理,详细分析了S3924- 512 Q图像传感器的结构、工作原理和特点。
In this paper, we researched an Auto-focus system which is based on FPGA and CCD image sensor.
本文详细研究了一种基于FPGA和CCD图像传感器的自动对焦系统。
The performances and test methods of CCD image sensor and pickup system, and the imaging characteristic of high resolution CCD camera are studied.
研究了CCD图像传感器及CCD摄像机的性能及测试方法。 重点探讨了高分辨率的CCD摄像机的成像特点。
Welding seam tracking system with linear CCD intelligent image sensor is described.
叙述了一种基于线阵CCD摄像机为传感器的焊缝自动跟踪系统。
DR is an electronic image acquisition system consisting of the sensor, a frame grabber in the computer and the software required to control the sensor and the do some basic manipulation.
DR是一个电子图像采集系统,由传感器、计算机图像采集卡和相关软件组成。该软件主要用于控制传感器并对传感器所采集的图像进行预处理。
By using SCCB programming model, the system establishes communication between FPGA chip and CMOS image sensor to achieve the control and acquisition of the signal.
系统采用SCCB编程模式,建立FPGA芯片与CMOS图像传感器之间的通信,实现信号的控制与获取。
The hybrid tracking and measurement system consists of a magnetic sensor coil measurement system and an image tracking system.
这种混合跟踪测量系统主要由磁场传感线圈测量系统和图像跟踪系统两部分组成。
This paper designs an image recognition system based on BP neural network and multi-sensor data fusion.
设计了一种基于BP网络和多传感器数据融合的图像识别系统。
In the part of vision system design, the hardware platform is composed of linear array light, cylindrical lens and linear array image sensor, then the algorithm of circle fitting method is carried on.
在视觉系统的设计中,采用线阵光源、柱面透镜和线阵图像传感器设计了视觉系统的硬件平台,并进行了圆拟合算法的分析。
In this paper the MTF system, using a new counting method and CMOS sensor as device for image reception, is discussed in detail.
本文详细讨论了一种采用全新计算方法,并以CMOS为图像接收器件的调制传递函数测量系统。
In this paper the MTF system, using a new counting method and CMOS sensor as device for image reception, is discussed in detail.
本文详细讨论了一种采用全新计算方法,并以CMOS为图像接收器件的调制传递函数测量系统。
应用推荐