A closed loop controlled ignition system with the use of an optical fiber dynamic combustion pressure sensor is presented in this paper.
介绍了一种应用光导纤维动态燃烧压力传感器的点火闭环控制系统。
The ancillary systems of plasma ignition are also involved in this paper.
本文还涉及了等离子点火的各辅助系统。
This paper starts with analyzing the firing mechanism of the LJUNGSTROM air preheater, and points out kinds of ignition factors of the air preheater.
本文从分析容克式空气预热器着火机理入手，指出引起空气预热器着火的各种因素。
This paper gives emphasis to structure, performance, key point of design and key link of operation of an ignition device over bed in fluidized bed boiler.
本文重点介绍流化床锅炉床上点火装置的结构、性能、设计要点及其操作要领。
Through analyzing the process, this paper proposed a basic design method of the ignition coil (inductance coil). It also gave some ways for measuring the work-efficiency of the ignition coil.
本文通过分析这个过程，给出了适合这种工作的点火线圈(即电感线圈)的基本设计方法，同时还提供了测试点火线圈工作效率的方法和手段。
In this paper, the research work on the field of laser ignition technique is introduced.
介绍了在激光多点点火技术领域所开展的研究工作。
Based on discussing the voltage parameter of auto power, this paper designs the related circuits about the ignition electrical module.
在汽车电源电压参数的基础上，设计了点火电子组件测试用电源的有关电路。
The whole design of laser ignition system with single optical fiber is researched in the paper. The emphasis of study is concentrated on performance of system.
论文主要研究了激光单点点火系统的总体设计，研究重点为激光单点点火系统的性能。
In this paper, equipment for ignition and speed for temperature rising in deferent conditions are discussed, problems for packing, handling and bricks laying are analyzed.
对点火升温所用设备，不同情况下升温速度进行了讨论，对包装、储运、砌筑等方面的一些问题提出了看法。
A flaming Angle measuring system for closed-loop ignition timing control of petrol engines is outlined in this paper, and an experimental example on a BJ492Q petrol engine is provided.
介绍了一种用于汽油机点火正时闭环控制的火焰信号角测量系统，并在BJ 492 Q型汽油机上作了实例试验分析。
This paper is concerned with the laser ignition performance of energetic material affected by the light spot diameter using photoelectric method.
用光电探测法研究了激光光斑直径对含能材料激光点火特性的影响。
This paper describes a single-chip microcomputer-based inspection and diagnosis system for analysing the faults of gasoline engine ignition device.
介绍一种利用单片机检测、诊断汽油机点火系故障的分析系统。
This paper explained the design of nozzles, injectors and burner cones of new ignition with producer gas on forced pre-mixing and the method of flame stability.
根据发生炉煤气的特性，采用强制预混燃烧方式，设计了点火器的喷嘴、引射器及烧嘴，并对稳定火焰的方法也进行了研究。
The exploiting technique of the multimedia Computer AidedInstruction system for electron ignition as studied in this paper.
本文研究了电子点火多媒体计算机辅助教学系统的开发技术。
The paper adopts energy saving technique of optimization operating control system in boiler automatic ignition, which reduced energy-consuming, and ensured safety in production.
本文采用锅炉自动点火优化运行控制系统的节能技术，大大降低了能耗、节约了能源，保证了安全生产。
This paper analysed and discussed only the test results of spark ignition methanol engine.
本文仅就其点燃式甲醇机试验结果进行了分析、论述。
This paper gives the operation knowledge and trouble shooting of a new non-distributor direct ignition system developed by General Motor Corporation.
本文介绍了通用汽车公司的新型无分电器直接点火系统的工作原理，及其故障诊断方法。
This paper introduces the advantage, the technical performance and application of polyurethane potting material used in automobile ignition coils.
研究了汽车点火线圈用聚氨酯灌封料的应用工艺。
In this paper, some work in the field of laser ignition is introduced.
本文介绍了在激光多点点火技术领域所开展的研究工作。
Beginning from the analysis of ignition waveform, this paper researches the influence of engine rotate speed variation to high voltage ignition waveform.
从点火波形分析入手，研究发动机转速变化对高压点火波形的影响。
This paper studied the models of pre-mixed spark ignition gas engine particularly, which adopted the method of mechanism analysis and system identification.
本文采用机理分析与系统辨识相结合的方法，对预混点燃式气体燃料发动机进行了深入细致的建模研究。
This paper modified a quasi dimensional model and utilized it to study theoretically the combustion variations in spark ignition engines.
本文改进了一个火花点火发动机的准维计算模型，并对燃烧的循环变动进行了理论计算研究。
The paper analyzes the ignition process of the boiling furnace in toasting theory with sulfur and iron ore and introduces mended ignition way.
本文用硫铁矿焙烧理论分析了沸腾炉的点火过程并介绍了改进后的点火方法。
This paper presents both the basic characteristics of ionic signal produced during ignition and combustion, and its application in the diagnosis of the misfire in a SI engine.
介绍了一种火花点火发动机在点火和燃烧中所产生的离子信号的基本特征以及该信号在失火故障诊断中的应用。
This paper introduces the designing principle, structure and function of the ignition coil tester.
介绍了点火线圈测试台的设计原理、结构及各项测试功能。
This paper develops the RUV4 automobile ignition coil testing system, which is used to test the 26 dynamic parameters of ignition coil automatically.
本文完成了RUV4型汽车点火线圈总成终检系统的研制，实现对点火线圈26项动态特性参数的自动测试。
This paper expounds the method that the conventional ignition system is refitted into the electronic ignition system, it is very important to master the correct refitted method.
本文阐述了把传统点火系改装为电子点火系的方法，掌握正确的改装方法是非常重要的。
This paper presents a newly designed compression ignition divided chamber combustion system of the natural gas engine.
本文介绍了压缩着火天然气发动机的一个新的燃烧系统，这个燃烧系统具有分隔式燃烧室。
This paper introduces the designing principle, structure and function of the ignition coil tester. It is used in ignition coil production line and has better accuracy and repetition.
介绍了点火线圈测试台的设计原理、结构及各项测试功能。该测试设备用于点火线圈生产线上，其各项性能的重复性、准确性较好。
This paper introduces the designing principle, structure and function of the ignition coil tester. It is used in ignition coil production line and has better accuracy and repetition.
介绍了点火线圈测试台的设计原理、结构及各项测试功能。该测试设备用于点火线圈生产线上，其各项性能的重复性、准确性较好。
应用推荐