The parameter estimation and system identification of nonlinear structures is a subject which serves to obtain and verify mathematical model of nonlinear structures.
非线性结构的参数估计和系统识别是取得和验证非线性结构数学模型的一门学科。
This paper describes the development of an Expert System prototype for the reservoir model identification in well test interpretation (RMIESWT).
本文描述了试井油藏模型识别专家系统（RMIESWT）原型的研制成果。
Noise source identification for the model GZ6921 bus having rear mounted engine has been car ried out by means of the noise source identification model with testing and analysing system recommended.
运用该噪声识别模型及所介绍的测试分析系统，对GZ 6921型后置发动机客车噪声源进行了识别。
This paper establishes a linear model for vehicle steering system based on vehicle steering dynamics and per-view kinematics, combined with system identification of steering system.
从车辆的转向动力学和预瞄运动学特性出发，结合转向系统的系统辨识，建立了车辆转向系统的线性模型。
The paper gives a indirect adaptive fuzzy controller . We obtain the model of the plant by fuzzy system identification online, then design the fuzzy controller online according to this model.
本文给出了一种间接自适应模糊控制器，它通过在线模糊系统辨识得到控制对象的模型，然后根据所得模型在线地设计模糊控制器。
When using the system identification methods to establish the dynamic thermal model of the building wall, the order of the discrete time model was usually set up to be constant value.
当使用系统辨识方法建立建筑墙体动态热特性模型时，通常将时间离散模型的阶次通常设为定值。
In view of modeling problems of nonlinear and dynamic system, a self organizing fuzzy identification algorithm (SOFIA) is presented based on t s model in this paper.
针对复杂非线性动态系统的模糊建模问题，基于T -S模型提出一种自组织模糊辨识算法。
Global positioning system real time kinematic technology (GPS RTK) was applied to the error model identification of the inertial navigation platform in this paper.
对在惯导平台车载试验误差模型辨识中使用全球卫星定位系统(GPS)载波相位差分(rtk)法进行了研究。
An easy numerical algorithm is derived by means of the identification for input-output model of water-carriage system via a block pulse functions.
给出了一个利用方波脉冲函数辨识过水系统输入—输出模型的简易数值解法。
The mathematic model with system identification based on the data of practically industrial product process is developed for the vacuum removing Pb furnace.
利用系统辨识的方法，根据工业现场数据，建立了真空脱铅炉的数学模型。
The structure identification of the model on the linear system is virtually to determine the structure parameter of the model.
线性系统的模型结构辨识实质上就是确定模型的结构参数。
A mathematical model of the human body thermal regulation system is established, and the physiological identification parameter of aircraft cabin temperature is numerically simulated.
建立了人体热调节系统数学模型，对飞机座舱温度生理鉴定参数进行了数值模拟。
An adaptive fuzzy clustering identification algorithm is employed to get the T-S fuzzy model of a system.
用基于T - S模型的自适应模糊聚类辨识算法对系统进行辨识。
An experimental transfer function of the model was acquired by the system identification, and also the function is checked by the result derived from FEM model.
利用传递函数法进行了平台结构模型的系统识别，并与有限元模型进行了比较。
The identification method for the one dimension time series, open loop and closed loop system are developed by use of model ARMA.
讨论了一维时间序列开环系统、闭环系统的辨识方法及定阶问题。
In this paper the technologies of model forecasting and the fault model identification and the intelligence monitoring using fuzzy system and neural network are studied.
本文主要对模糊系统和神经网络技术在模型预测、故障模式分类和智能监测中的应用进行了研究。
This paper presents software model and relative technique of the analysis and identification system on disease and microelement.
介绍了人体疾病与微量元素分析识别系统的软件模型及与实现中所涉及的相关技术。
Experimental results show that the designed apparatus meets the demands of synchronous generator excitation system for model identification.
实验结果表明，仪器可满足同步发电机励磁系统模型辨识的要求。
With the method of system identification, a math model is set up in this paper.
应用系统辨识方法建立拖拉机阻力控制系统犁耕阻力的数学模型。
According to the modified least square algorithm of system identification technique, a diagnostic model of power transformer fault is determined and described by fuzzy relation matrix.
采用系统辨识的最小二乘法的改进算法，确定了一种用模糊关系矩阵表示电力变压器故障诊断模型。
This paper studies mainly on the construction of the model of a cantilever beam with moving rigid body at random speed and the analysis and identification of the system.
本文主要研究建立在任意速度运动刚体激励下、带弹性支撑悬臂梁系统时变参数动力学的模型，并对该系统进行了分析和识别。
In the process of identification, a bilinear model, based on which the identification equations are obtained, is used to describe the memorial restoring force of the nonlinear hysteretic system.
在识别过程中，将非线性迟滞系统的记忆恢复力用双折线模型来描述，并由此模型写出非线性迟滞系统的参数识别方程。
This model, as a part of the overall design of control system, shall be the base of on-line identification and process optimization in the future.
该模型为控制系统总体设计的一个部分，是下一步进行模型在线识别、寻优的基础。
Here, we suppose that the model structure is unknown. A unified description method of model set of multi-model system, including the identification method of model structure and parameter, is given.
这里不假定模型结构已知，给出了多模型系统模型族的统一描述方法，包括模型结构与参数的辨识方法。
Based on the fuzzy identification theory, a single fuzzy model direct distance method is raised, which is suitable for operating model identification of complex system.
在模糊识别理论的基础上提出了一种适宜于复杂系统工况识别的单模糊模式直接距离法。
Barefoot plane footprint computer program identification algorithm and build system model consistently is one of the key research content in the criminal investigation of image processing.
赤脚平面足迹(赤平足)计算机识别算法和系统建模一致是刑侦图像处理研究的重点内容之一。
An online predictive supervisory optimal controller model of a central chilled water system is developed by integrating the model level, performance and parameter identification.
针对集中空调水系统，将模型层次、模型特性及参数辨识有机结合，建立了系统层次实时在线的优化控制预测模型。
The main element analysis model was established with the several sensors highly related in the identification system of the diagnosis method.
该方法可辨识系统中相关性较高的若干传感器，并为之建立主元分析模型。
The main element analysis model was established with the several sensors highly related in the identification system of the diagnosis method.
该方法可辨识系统中相关性较高的若干传感器，并为之建立主元分析模型。
应用推荐