The identification error and the (trajectory) tracking error are analyzed and guaranteed to be bounded.
对辨识误差和轨道跟踪误差进行分析并证明了它们的有界性。
In the adaptive algorithm, the parameter adjusting laws of the fuzzy logic systems are derived by the tracking error and the identification error.
自适应算法中，不但跟踪误差而且辨识误差都参与模糊逻辑系统中的参数调节。
Cited a study from the management level, the general method of risk identification, Clear the construction control risk identification error numerical method-Sensitivity analysis of design parameters.
列举从管理学角度进行研究的一般风险识别方法，明确了施工控制误差风险识别的数值方法—设计参数敏感性分析方法。
The input UI has been improved with parameter validation, while the status and error columns have been redesigned to simplify error identification.
输入UI已通过参数验证得到了改进，同时状态和错误列已经过重新设计，以简化错误识别。
These sources of error and uncertainty include variations in flare efficiency, mis-identification of flares, non-continuous sampling, and environmental effects like snow reflection.
这种误差来源和不确定性包括燃除效率差异、燃除的判断错误、不连续的采样、以及像雪花反射那样的环境影响。
Highlight the error messages for easy identification in the output file.
在输出文件中，为了容易标识，突出显示错误消息。
When drift exists, the gas measurement or identification result may cause error.
传感器特性漂移会给气体的测量和识别带来误差。
Error Handling during Service identification.
服务标识中的错误处理。
It's important to improve the performance of weapon for compensating the errors of inertial sensors. Identification of error model is the key to compensating errors.
惯性敏感器误差补偿技术对提高武器装备的性能具有重要的意义，而误差补偿的关键在于误差模型的辨识。
In study on structure damage identification in time domain, error of numerical integral will affect directly accuracy of parameters resulted from reversion.
在结构损伤识别的时域法研究中，数值积分的误差将直接影响反演参数结果的精度。
This paper proposes a new feasible identification and revision method for error elements in comparison matrix.
本文提出一种新的切实可行的判断矩阵错误元素的识别和调整方法。
In this paper we proposed a closed form solution for direct identification of FIR system parameter, which circumvents the problem of error propagation.
本文提出了一种直接识别系统参数的闭形式表达式，避免了参数递归迭代方法的误差传播问题。
To overcome the long test time and big error in single variable open loop step test method, a novel identification method based on asymptotic theory (asym) is presented.
为克服传统单变量开环阶跃测试法测试时间长和误差大的缺点，提出一种基于渐进黑箱理论的多变量辨识方法。
Drift is addressed as one of the most serious impairments for gas sensor. When drift occurs, the gas measurement or identification result may be error.
气体传感器的最大缺陷之一就是存在特性漂移，这会给气体的测量和识别带来误差。
How to minish measure error and enhance identification precision was also studied in the paper.
文章还对如何减小测量误差，提高辨识精度进行了研究。
This paper presents the application of an approximate nonlinear filter in the identification of gyro drift error model.
提出了应用近似非线性滤波技术，辨识陀螺漂移误差模型的方法。
Because the real input acceleration can not be obtained during the error model identification of the inertial navigation platform, so the measurement value is used to substitute the input data.
在进行惯导平台误差模型辨识的过程中，真实的输入加速度难以获得，因此不得不使用测量值来代替，这使得输入输出观测数据中均含有测量噪声。
Predictive filtering based on minimum model error is introduced to realize real time identification of unknown perturbations and conquer influence of model error.
引入基于模型误差最小准则的预测滤波算法，实现对未知扰动的实时辨识与估计，克服模型误差影响。
In this paper, an engineering example of drift error parameter identification for a type of inertial navigation platform is presented.
本文给出了某型号惯导平台漂移误差参数辨识的一个工程实例。
Using dynamic recurrent neural networks as identification and controller, the minimum error control of robot tracking the idea locus is implemented.
采用动态对角回归神经网络作为辨识器和控制器，实现了机器人轨迹跟踪的最小误差控制。
Global positioning system real time kinematic technology (GPS RTK) was applied to the error model identification of the inertial navigation platform in this paper.
对在惯导平台车载试验误差模型辨识中使用全球卫星定位系统(GPS)载波相位差分(rtk)法进行了研究。
In this paper, the parameter identification technique of inertial navigation platform drifting error model is studied.
本文研究了惯导平台漂移误差模型的参数辨识技术。
Secondly, a camera system error model is put forward, and all coefficients are computed accurately by using system identification theory, and the test result is reported.
同时提出了一种成像系统误差的修正模型，并利用系统辨识方法正确估计了该模型的各参数；
The error analysis proves that this method can realize the exact identification of the structure boundary support stiffness if the modal test results are of enough accuracy.
误差分析表明，如果模态试验结果具有足够的精度，用本文方法能够准确地实现结构边界支承刚度识别。
The paper aims to illustrate the whole process of error analysis, including error identification, error description, error explanation.
本文从理论上详细叙述了错误分析的全过程，包括错误识别，错误描写，错误解释，错误纠正。
The method of error identification.
误差辨识方法。
The least robustness square method is applied in topology error identification and faulty data identification.
将抗差最小二乘法用于拓扑错误辨识和坏数据辨识。
A new two-step damage identification method based on residual force vector considering the impact of measurement error (noise) in most cases is proposed.
提出了一个考虑模态噪声影响的基于残余力向量法的损伤识别两步法。
A new two-step damage identification method based on residual force vector considering the impact of measurement error (noise) in most cases is proposed.
提出了一个考虑模态噪声影响的基于残余力向量法的损伤识别两步法。
应用推荐