Pressed and welded steel banjo housing, single reduction, hypoid gear, ratio 6.33:1.
冲压，焊接钢班卓琴住房，单减少，双曲面齿轮，比6.33：1。
DD652 or EQ153 Pressed and welded steel banjo housing, single reduction, hypoid gear.
DD652或EQ 153冲压焊接钢管班卓琴住房，单减少，双曲面齿轮。
Thus, the basis of founding loaded tooth contact analysis calculating method of hypoid gear is brought about.
其结论是建立该类齿轮副承载啮合性能分析计算方法的基础。
The active design technique of hypoid gear tooth face provides a kind of fresh method of the hypoid gear design.
准双曲面齿轮齿面主动设计技术为准双曲面齿轮副的设计提供了一种全新的思路。
The theory of calculating geometric parameters of pitch cone of curved tooth hypoid gear is investigated in this paper.
本文研究了曲齿准双曲面齿轮分度锥面几何参数计算的原理。
The integral type housing, hypoid gear design has the centerline of the pinion set above the centerline of the ring gear.
集成型的差速室、准双曲面齿轮的设计中，小齿轮组中心线在环形齿轮的中心线之上。
In particular the automotive industry is developing rapidly so that the requirement of meshing quality of hypoid gear is increasing.
特别是汽车工业的迅猛发展，对准双曲面齿轮的啮合质量要求越来越高。
Hypoid gears represent the most common form of gear driving. It is of great significance to clarify their geometric design principle.
准双曲面齿轮是齿轮传动的普遍形式，弄清它的几何设计原理具有十分重要的意义。
According to the feature of epicycloid hypoid gear, a new method is proposed to calculate the geometric parameters of pitch cone accurately.
根据延伸外摆线准双曲面齿轮的特点，提出一种精确计算其分度锥面几何参数的新方法。
The vibration of Hypoid gear is main reason of rear axle vibration, the key of reduce rear axle vibration lie in improving gear's processing, assembly quality.
准双曲面齿轮的振动是后桥振动的主要原因，减小后桥振动的关键在于提高齿轮的加工，装配质量。
The hypoid gear is one sort of the special bevel gears. It gets comparatively extensive application in aircraft industry, automotive industry and tractor industry.
准双曲面齿轮是一种特殊的锥齿轮，它在航空、汽车、拖拉机等工业中得到了较为广泛的应用。
The intelligent check system proposed in this paper can be used as the final quality check and quality control tool in spiral bevel and hypoid gear manufacture process.
本文提出的锥齿轮智能检测系统可在锥齿轮制造过程中用作最终质量检测和质量控制工具。
The gear cutting machines with single tilt mechanism, such as the TAN-A9 machine, are intended only for cutting the spiral bevel and hypoid gears with teeth of constant depth.
诸如TAN-A9这样的单刀倾切齿机床过去仅用于加工等高齿弧齿锥齿轮和准双曲线齿轮。
Taking the case of product family design of nc spiral bevel and hypoid gear generator, design method and course were analysed around fundamental principles of product family design.
围绕产品族设计的基本思想，以数控弧齿铣齿机产品族设计为例，分析了产品族设计的方法与过程。
An optimization design method for a hypoid gear with high tooth was proposed based on the investigations into variations of working tooth height and constraint conditions of undercut.
通过增加工作齿高和对根切条件的深入研究，提出了高齿准双曲面齿轮的优化设计方法。
Based on the conceptual model of the five-axis simultaneous CNC bevel gear cutting machine, a new machining theory for the function-oriented active tooth surface of hypoid gear is proposed.
基于五轴联动数控铣齿机的概念模型，提出一种新的加工准双曲面齿轮主动设计齿面的切齿原理。
Furthermore, Romax provides the capability to perform structural analysis of an entire gear train system, including compound planetary gear sets of the transmission and hypoid gears of the axle.
此外，Romax软件还能够提供包括多级行星齿轮和准双曲面齿轮系统在内的完整齿轮传动系统的结构分析能力。
Then, According to the cutting tooth processing principle, establish hypoid gear model, and conduct virtual assembly, interference checking, provides the precise model for the following analysis.
再根据切齿加工原理，建立了准双曲面齿轮模型，并进行虚拟装配，干涉检查，为后面分析提供精确的模型。
Compared to bevel gear, hypoid gear has larger overlap coefficient, lower gear contact stress, more smooth transmission, lower impact and noise, higher load bearing capacity, longer life and so on.
准双曲面齿轮与普通圆锥齿轮相比，具有重合度大、齿面接触应力低、传动平稳、冲击和噪音小、承载能力高和寿命长等优点。
The hypoid gear is in common use today due mainly to the fact that the offset pinion allows the propeller shaft to be set below, (for cars) or above, (for commercial vehicles) the crown wheel center.
现在的主减速器普遍使用准双曲面圆锥齿轮，这主要是因为 主动锥齿轮的偏移允许轿车上传动轴布置得比从动锥齿轮低 一些，而商用车上又允许布置得比从动锥齿轮高一些。
The CNC hypoid cutting machine is a new kind of machine tool, which coordinates all machine movement necessary for gear manufacturing in 6 axes of motion.
螺旋锥齿轮和准双曲面齿轮数控磨齿机是一种新机床，将齿轮加工所需全部运动用六坐标数控来实现。
The CNC Hypoid Cutting machine is a new kind of machine tool, which coordinates all machine movement necessary for gear manufacturing in 6 axis of emotion.
螺旋锥齿轮和准双面齿轮数控铣齿机是一种新机床，将齿轮加工所需全部运用用六座标数控来实现。
The CNC Hypoid Cutting machine is a new kind of machine tool, which coordinates all machine movement necessary for gear manufacturing in 6 axis of emotion.
螺旋锥齿轮和准双面齿轮数控铣齿机是一种新机床，将齿轮加工所需全部运用用六座标数控来实现。
应用推荐