The paper analyse the influence of test area, test condition and apparatus on result while using Hydraulic method for determining fabrics' bursting strength.
本文简述采用弹性膜片法测定织物的胀破强力时，试验面积、试验条件和设备仪器等因素对织物胀破强力的影响。
Fracking - Hydraulic fracturing is a controversial method for extracting fossil fuels from hitherto unreachable deposits.
碎裂——对于现有化石燃料的储存，水力压裂是一个颇有争议的开采方法。
Regarded as the study of the method of structure design for hydraulic support, and as a computer assistant design system, it has certain referable value.
作为液压支架设计方法的研究和计算机辅助设计系统，具有一定的参考和借鉴价值。
Current search of hydraulic system failure of traditional method is logic analysis to approach the diagnosis.
目前查找液压系统故障的传统方法是逻辑分析逐步逼近诊断。
The design method is simple and convenient, and is suitable for hydraulic transmission system with time control and stepped process.
这种设计方法方便快捷，规律性强，对于时间控制和过程步进控制的液压传动系统都适用。
This paper introduces hydraulic vibration-exciting system for marble moulding machine, and pats forward rational selection method of vibration. parameter for the system controlled by rotary valve.
本文介绍了应用于再造大理石成型机的液压激振系统，并提出了应用转间控制的系统其振动参数的合理选择方法。
The numerical inverse method is an indirect method to determine soil hydraulic properties.
数值反演方法是间接确定土壤水力性质的方法之一。
Traditional method for overhaul of the top of miter gate is through manual operation by hydraulic hoisting jack which has the shortcomings of low efficiency and great risk.
摘要船闸人字门顶门检修的传统方法是采用液压千斤顶手动作业，工作效率低，时间长，技术风险大。
The diversiform testing methods were introduced, the development trend in hydraulic system was forecasted, and the specific step and method through the example was analyzed in this paper.
本文介绍了当前液压系统的多种检测方法，并预测了以后的发展趋势，又通过实例分析了具体的检测步骤与方法。
The non-uniqueness problem is always encountered when numerical inverse method coupling with one step outflow experiments is employed to determine the soil hydraulic properties.
结合单步出流实验的数值反演方法在确定土壤水力性质时会遇到解的非唯一性问题。
A method of the electro hydraulic servo system identification modeling is presented based on support vector machines.
提出了电液伺服系统的支持向量机的辨识建模方法。
The paper researchs the principle of protective seam mining, hydraulic slotting method and executing-digging technology to avoid risk of coal-gas outburst, and its practices in coal mine.
通过分析近距离保护层开采、水力掏槽法及边抽边掘技术防治煤与瓦斯突出原理及实践应用，从而有利于煤与瓦斯突出矿井选择合理有效的防突技术。
The thesis introduces the method of malfunction diagnoses and obviating on complex hydraulic system by integrated analysis methods.
文章介绍了用综合分析法对复杂液压系统进行故障诊断和排除的方法。
The modeling method oriented to design of hydraulic valve library is presented in this paper.
提出了面向设计的液压阀库建模方法。
RCCD is wide used in hydraulic engineering because it takes advantages of concrete dam's structure and material and earth-rock dam's construction method.
碾压混凝土坝是将混凝土坝结构和材料与土石坝施工方法的优越性结合起来，在水利工程中得到广泛应用。
The method which sensor error is compensated with the artifical neural network algorithms is applied to the hydraulic measurement technique.
论文将基于神经网络算法补偿传感器测量误差的方法，应用到水利测量技术中。
So it is very important that studying the real-time control and advanced control method of Electro-hydraulic Servo System.
因而对电液伺服系统的实时控制和先进控制方法的研究具有非常重要的意义。
Hydraulic lifting upside-down method is advanced for the internal steel stacks' installation, and it was firstly invented inland.
液压提升倒装法是一种先进的多管式烟囱钢内筒安装方法，属国内首创。
A pretension method for major diameter bolts using hydraulic stretching equipment is introduced.
介绍了一种大直径螺栓的预紧方法液压拉伸预紧法。
This paper introduces a method of Computer Aided Design of hydraulic component springs. This method avoids the traditional tedious try calculation.
本文提出一种液压元件弹簧的计算机辅助设计法，这种方法可避免传统的繁锁试算。
This paper mainly introduces the control method of hydraulic system's pollution source and the key of control skill, and provides important reference for actual work in future.
文章介绍了液压系统污染源的控制方法和关键控制技术的应用，可为今后的实际工作提供重要的帮助。
This paper describes the structure, operating principle and using method of hydraulic safety coupling, makes analysis of its advantages and the application in mill equipments.
阐述了液压安全联轴器的结构、工作原理及使用方法，分析了其优点，并以实例说明了其在轧钢设备中的应用。
Construction features and design method of hydraulic rope adjusting devices are presented according to defects existing in nut screw pair rope adjusting devices.
针对以往螺母丝杠副调绳装置所存在的缺陷，介绍了液压调绳装置的结构特点及设计方法。
Hydraulic model tests have showed that the devised method describes the hydraulic characteristics of the bucket well, and the computational results agree with those measured.
模型试验表明本方法可以比较准确地反映这种窄缝挑坎的水力特性，试验结果与计算结果基本一致。
Provides a hydraulic calculation method of EG Pipes in ice storage systems, and some fitting equations for CAD.
给出了冰蓄冷系统乙二醇管道水力计算方法和适用于CAD的拟合方程。
Main hydraulic cylinder columns and cross beams of hydraulic press are designed with finite element method.
采用有限元方法对液压机中的主液压缸、横梁和立柱进行结构设计。
This article is to offer the hydraulic calculation method of indoor non-sanitary fixtures to one horizontal and one or more vertical closed arcuit water supply pipe system through examples.
本文通过例题介绍室内卫生器具非对称布置的水平单环、竖向单环和竖向多环三种给水管网的水力计算方法。
There are two analysis methods of hydraulic fracture: effective stress method and total stress method. Their computation results are quite different.
水力劈裂的常用计算方法分有效应力法和总应力法，但其计算结果却常有很大差异。
So it 's necessary to study the damage in the fracture during hydraulic fracturing and find out corresponding method.
因此有必要对压裂过程中的裂缝损害进行研究并找出相应的解决措施。
As a professional application software, the hydraulic CAD system is a widely used assistant designing method in the hydraulic industry.
液压CAD系统作为一种专业应用软件，是液压行业经常使用的辅助设计方法。
应用推荐