In the hydraulic system USES the accumulator, may the absorption line shock maximum limit, reduce to the variation of load to the adhesive tape the impact, enhances adhesive tape's service life.
液压系统中采用蓄能器，可以最大限度的吸收液压冲击，减小对负载变化对胶带的冲击，提高胶带的使用寿命。
In a coal gas blower set for condensation were incorporated D750 28 blower and speed up hydraulic coupler to adjust load as well as computer control system.
煤气冷凝鼓风机组技术改造选用D750 -28型鼓风机，采用增速型液力偶合器调节负荷及计算机控制系统。
Simulation analysis was carried out for the variable speed pump-control-motor hydraulic system. Mathematic models of inverter, asynchronous motor, fixed pump and load were set up.
本文对变转速泵控马达液压系统进行了仿真分析，建立了系统中变频器、异步电动机、定量泵、马达以及负载的数学模型。
The design basis of the springs and hydraulic system is proposed, which can better distribute the load of the rubber wheel and steering wheel, and attain the purpose of safety and reliability.
提供了弹簧及液压系统的设计依据，从而可以更好的分配导向轮与胶轮的载荷，达到安全、可靠的目的。
This paper mainly discussed the design of slow rate land treatment system and plants choosing, fitting field, land area and hydraulic load designing.
本文主要探讨了慢速渗滤污水土地处理系统的设计，以及设计中植物选择、场地适宜性、土地面积及水力负荷设计等内容。
By analyzing the mathematic model of the hydraulic system and system load, the virtual prototype of hydraulic support system was built in ADAMS environment.
通过分析液压系统以及系统载荷的数学模型，在ADAMS环境下建立了某液压支撑平台系统的虚拟样机模型。
The load movement rules is the basis of the design of hydraulic system and the optimization of matching the relationship between different hydraulic systems and load.
汽车起重机负载运动规律是设计液压系统以及优化匹配液压系统和负载之间的关系的基础。
In order to analyze the load deformation, a single spring dual moment inertia model was used to model the load of dual hydraulic motor synchronizing driving (DHMSD) system.
针对双液压马达同步驱动系统建模过程中存在负载变形考虑不足的情况，采用单弹簧、双惯量块代替单惯量模型建立负载动力学模型；
Based on the principle of power bond graphs, the modeling method for the hydraulic steering control unit type BZZ5 with the load sensing hydraulic steering system is introduced.
依据功率键合图原理，研究BZZ5型液压转向器和负荷传感全液压转向系统的建模方法。
The intelligent hydraulic controlling system consisting of test control board and intelligent control sensors is used to exert load automatically and keep model pressure stable.
智能液压控制系统用于试验模型的自动加载与稳压，主要包括试验控制台和智能控制传感器。
And the load of loader changes frequently and varies greatly, which may result in much overflow loss of the hydraulic system of loader.
而装载机工作装置负载变化频繁且变化范围较大，导致液压系统存在较大的溢流损失。
The dead load experiment study for this system has been conducted for the first time in China. The bulging law of the hydraulic elastic bulging roll has been studied.
本文在国内首次完成了液压胀形轧辊系统的静载实验研究，初步探讨了液压胀形轧辊的胀形变形规律。
A new hydraulic load simulation system, adopting a rotation directional valve and using a spring accumulator simulating the starter load, is proposed and working principles are described.
提出了一种采用旋转式换向阀及弹簧蓄能器模拟发动机负载的液压负载模拟系统，详细介绍了该系统的工作原理；
The low efficiency of a hydraulic system is mainly caused by the power mismatching its load.
功率不匹配是造成液压系统效率低的主要原因。
Motor dragging and servo load of hydraulic pressure system has been looked as the front subject of the technology of hydraulic pressure.
液压伺服马达拖动和液压伺服加载，目前列为液压技术研究的前缘学科。
To identify all the model parameters for the whole system, the system model is divided into two parts: hydraulic model part and mechanical load part.
为了辨识整个系统的模型参数，将系统模型分为液压驱动模型部分和机械负载模型部分。
In this paper, a hydraulic pulling-winding system with load auto-adaptation is put forward. The structure and hydraulic control system are designed, and its winding performance is simulated.
本文提出了负载自动适应的减张力液压卷取系统的概念，对其结构及液压控制系统进行了设计，同时对系统的卷取性能进行了仿真。
All hydraulic load sensing steering that supplies oil on demand preferentially and valve working hydraulic system of single pump priority are economic and energy-saving.
优先按需供油的全液压负荷传感转向及单泵优先阀门工作液压系统，经济节能。
During dry season with low hydraulic load, the system is at an anaerobic condition due to insufficient water mobility, and phosphorus release from the media occurs.
旱季时由于水力负荷极小，水体流动性差，系统内处于厌氧状态，出现了磷的释放。
Electro-hydraulic proportional sectional valves are realized with load sensing control, and the pump output power is adaptive to load, the system effectiveness is highly enhanced.
通过对电液比例多路阀进行负载敏感控制，实现泵和负载之间的功率匹配，显著提高系统效率。
Digital electro-hydraulic control system (DEH) is the core of turbine control system, then the performance of load control system determines whether the unit can run better.
数字式电液调节系统(DEH)是控制汽轮机运行的核心，其负荷调节系统控制性能的优劣直接影响整个机组的正常运行。
ATS-HM68Designed for high precision, heavy load and the new hydraulic system and the development of the longevity of hydraulic oil.
ATS - HM 68专为高精度，重负荷及全新液压系统而研制的长寿液压油。
The constructuin. the qualities and the application programs of a 10-channel hydraulic-servo-load system controlled by microcomputer are introduced.
介绍了微机控制10通道液压伺服加载系统的结构、性能和应用程序。
The paper introduces the gathering system of intelligence load based on material experiment machine with hydraulic pressure omnipotence.
阐述了液压万能材料试验机智能载荷采集系统，为材料检测的准确、客观及公正提供了技术保障。
The impact of starting is the main reason which damage the starting machine of carrying load or shorten its life. The soft starting system of mechanism, electricity and hydraulic has been designed.
启动冲击是造成带载启动机械设备损坏或缩短其使用寿命的主要原因，本文设计了机电液一体化的软启动系统。
Electro Hydraulic Servo Valve is key component in roll load system of aluminium foil rolling mill. This paper introduces the principle and maintenance of Electro Hydraulic Servo Valve...
电液伺服阀是铝箔轧机压上电液控制系统中的关键零部件。在介绍电液伺服阀工作原理的基础上，就其使用与维护要素作了阐述。
In an ideal hydraulic system, the flow of the pump should just satisfy the load motion and the pump pressure is only a little higher than the load pressure.
较理想的系统应有能力在任何情况下使油泵流量恰好满足负载变化要求，而油压仅比负载压力略高一较小值。
And once the system pressure or load changes still need to re-adjust the hydraulic system.
并且一旦系统压力或负荷发生变化仍需要重新调整水力系统。
This product is suitable for all hydraulic system including the ordinary injection moulding machines and any hydraulic transmission system operated at high speed, heavy load and extreme temperatures.
ATA液压油还具备极出色的防锈、防腐蚀、抗泡和氧化稳定性，适合所有液压系统使用，包括一般喷注机及高速、高负载及高温操作的液压传动系统。
Pressure control valves are used for controlling the pressure in a hydraulic system and protect its hydraulic pump and actuators from over-load.
压力阀是用来控制液压系统的压力和防止油泵及执行元件的过载。根据功能可分为溢流阀、减压阀、顺序阀、卸荷溢流阀等。
应用推荐