"They were simple to build. That was the genius of the hull design," he said.
“它们很容易造。这是这种船身设计的独到之处，”他说。
In an urgent situation, a light boat is more important than a sophisticated hull design, but a light boat with a wrong rear end design pushing the water can also be a disadvantage.
在一个迫切情况，一灯塔船比一个老练船身设计是重要的，但一灯塔船与一个错误尾端设计推挤水可能并且是不利。
The MoD said that the design of the vehicle hull incorporated many of the latest armour-protection features and is considered to be among the best in the world.
国防部表示这款装甲车外壳被设计成具有众多最新的装甲保护技术的特点，而且这种外壳被认为是世界上最好的。
Like its predecessors before it however, the system would never meet its potential due to the design theory of melding a long hull on a short set of tracks.
这种坦克系统的设计理念就是将一个长车厢安装在一组短履带上，但正像CA型坦之前的那些设计一样，这种组装方式未能收到其预期效果。
Metric system to be adopted for design and construction of hull, machinery, equipment, etc.
船体、机械和设备等的设计与建造采用公制单位。
The overall design is informed by fluid dynamics and underwater ecosystems, with hydrodynamic research informing the design of the hull.
总体设计依据是流体动力学和水下生态系统，船体是通过对水动力进行研究后进行的设计。
By using fuzzy theory in ship lines design, a new method is described which produces section area curve and transforms hull form.
将模糊理论应用到船体线型设计中，提出了一种新的横剖面面积曲线生成和线型变换法。
Additional, in "MARPOL Reg 12a" the demand of Double Hull Protection for fuel oil tank, increases the difficulty of structure design for engine room.
加之MARPOL12A条款要求对燃油舱设置双壳保护，给机舱的结构设计增加了难度。
The relation of principal parameters of hull with lines design is discussed.
文中还探封了船体各种主要参数与线型设计的关系。
Common structural Rules for Double Hull Oil Tankers (CSR) have general and systemic influences on the structural design of VLCC.
油船结构共同规范(CSR)对VLCC结构设计的影响是全面和系统的。
As mid-ship is one of the most important parts of the hull, proper structure design of mid-ship is an important problem of the direct design.
船体舯部结构是船体最重要的结构，因此，船体舯部结构的合理设计是船舶结构直接设计的重要课题。
Therefore, collectivity design on The Underwater Ship Hull Cleaning Robot is finished.
完成了船体表面清刷机器人的总体设计。
CSR for Double Hull Oil Tankers, have many influences on the structural design of VLCC.
油船共同结构规范(CSR)对VLCC结构设计的影响是全面和系统的。
This paper presents raw material properties of FRP sandwich construction for ship. FRP sandwich construction design for local and overall strength of ship hull.
本文简单介绍船用玻璃钢夹层结构的原材料性能，船体局部强度的玻璃钢夹层结构设计，及船体总强度的玻璃钢夹层结构设计。
The use of GRP material for the ship hull brought about a lot of questions to the design of electric systems of the ship.
船体材料为玻璃钢的船舶，给电气设计带来了不少难题。
NURBS curve has been widely used in CAD/CAM. This paper discusses NURBS curve, its interpolation method and application in hull line design for twin stern ships.
NURBS曲线技术已经广泛使用在CAD/CAM等各个领域里。本文讨论NURBS曲线及其NURBS插值方法，并利用该插值方法设计双艉船的型线。
Using the property of the monotonic degradation of the ship hull strength with time, the minimum value of the ship hull strength in the design lifetime can be easily determined.
利用船体梁强度的单调退化特性，确定在设计寿命内船体强度的最小值。
New floor design type - the "Hull" floor building tool will allow designers to barrel-curve their floors to allow free-floating buildings, in case of global flooding.
新地板设计类型-“壳”楼工具将允许设计师桶曲线他们允许自由浮动的建筑物，全球水浸的情况下的地板。
With the lager dimension of the submarine pressure hull, the strength and stability analysis of pressure hull is still an important subject in the submarine design.
随着潜艇耐压船体的几何尺寸增大，耐压壳体的强度与稳定性分析仍然是一个具有重要实际意义的研究课题。
The information and navigating performance of excellent ship hull form are main technical supports to ship design and new ship form development.
优秀船型及其性能资料是船舶设计和新船型开发的主要技术支撑之一。
The goal of ship optimization design is to obtain the lightest hull weight and the largest cabin capacity, while on the condition that satisfies the requests of strength and general arrangement.
船舶优化设计的目的是在满足强度要求和总布置要求的前提下，使船体重量最轻，舱容最大。
It is recommended that the optimization of hull construction technology should be taken into account at the optimization design stage of ship.
本文提出在船型优化设计时就应考虑建造工艺的优化。
Based on linear wave making resistance theory and on & technique of boundary layer separation control, the present paper gives an optimized study of hull form below the design water line.
本文基于线性兴波阻力理论，把控制尾流分离作为约束条件，利用优化计算方法对设计水线下船体外形进行优化研究。
In this paper, principal dimensions, general capacities, general arrangement, hull structure and main design specialties of the first large semi-submersible tourist submarines at home are discussed.
介绍国内第一艘大型半潜式旅游潜艇的主尺度、总体性能、总布置、艇体结构及主要设计特点。
The design of magnetic structure is the key technology of ensuring reliable adsorption of the robot on the ship hull.
磁路结构的设计是保证机器人在船体表面可靠吸附的关键技术。
Based on the parametric design of fair curve, the parametric design method of hull form is presented in the paper.
基于光顺曲线的参数化设计，提出了参数化的船型设计方法。
During the design of ship structure, hull structure generally requires the finite element analysis.
在进行船舶结构设计时，一般都需要对船体结构进行有限元分析。
During the design of ship structure, hull structure generally requires the finite element analysis.
在进行船舶结构设计时，一般都需要对船体结构进行有限元分析。
应用推荐