The morphology of hot corrosion was observed.
观察了热腐蚀的形貌。
Superalloys operated in an hot corrosion environment will be failed earlier.
在热腐蚀环境中应用的高温合金会过早地失效。
The solubility studies may be of assistance in understanding fluxing and electrochemical mechanisms of hot corrosion.
金属氧化物溶解行为的研究将有助于了解热腐蚀的盐溶机理和电化学机理。
In addition, the concept of "effective chromium content" seemed to give a correct prediction of the hot corrosion resistance of such alloy systems.
此外，“等效铬含量”概念可以在一定程度上预测此类合金的热腐蚀抗力。
NiCrMo coatings have superior function of resist hot corrosion, is suitable for use in the protection material of the petroleum and the chemical engineering equipments.
这种镍基合金制备成涂层具有优良的抗热腐蚀性能，适于作为石油化工设备的防护材料。
The rational aspects of the fluxing model as well as the general characteristics existing in high temperature gaseous corrosion and hot corrosion are considered in the electrochemical model.
根据热腐蚀的特点，吸收盐熔模型的合理成分，并考虑到热腐蚀与高温气体腐蚀的共性，提出热腐蚀的电化学模型。
The high temperature protection coatings play an important role for preventing high temperature oxidation and hot corrosion from aircraft turbine engine and prolonging the time life of engine.
高温防护涂层在防止航空涡轮发动机抗高温腐蚀以及延长发动机寿命方面起着越来越重要的作用。
The performance valuation and analysis was reviewed to the mechanics property, oxidation resistance, hot corrosion resistance, erosion resistance, and thermal property of thermal barrier coatings.
文中对热障涂层的力学性能、抗氧化和抗热腐蚀、抗磨蚀和热学特性等性能的评价及性能判断与分析进行了综合回顾。
High speed rail surface corrosion in the form of electroplating, hot dip, spray, dip, dip galvanized. High speed rail use effect.
高速护栏表面防腐形式有电镀、热镀、喷塑、浸塑，镀锌后浸塑。高速护栏使用效果。
We suggest that the main structure of the steel using hot dip galvanized processing, so that can greatly reduce the corrosion and rust of steel.
我们建议主结构的钢材采用热镀锌处理，这样能大大降低钢材的腐蚀及生锈几率。
The corrosion and temper embrittlement of reactor shell probably occurred under hot wall condition were analyzed.
对反应器壳体在热壁条件下可能发生的腐蚀和回火脆性进行了分析。
So cold zinc spraying coating corrosion resistance is better than that of spraying zinc (aluminum), hot galvanized and other zinc rich coatings.
所以冷喷锌涂料的防腐蚀性能优于喷锌(铝)、热镀锌及其他富锌涂料。
The premature corrosion and cracking failure of hot dip galvanizing pot lead to the increased galvanizing cost and large production loss.
镀锌锅的过早腐蚀和失效开裂，导致镀锌成本的上升和生产的极大损失。
Both compressor fouling and hot gas corrosion can be avoided leading to significantly reduced maintenance costs.
压缩机结垢和气体腐蚀都可以避免，最终节约了维修成本。
The application of tube body corrosion detection system in the steam injection pipelines for hot extraction of thick oil is introduced when the existing insulation layer is not dismantled.
介绍了在不拆除现有保温层的情况下，管体腐蚀检测系统在稠油热采注汽管道中的应用。
The cermet had merits of high resistance to corrosion of hot metal and slag, it can be used for continuous temperature measurement.
金属陶瓷具有良好的耐热态金属及熔渣侵蚀性能，可实现对高温熔体温度的连续测量。
The corrosion weight loss rate and impact toughness of high Mn steel in hot concentrated caustic solution were studied by using immersed corrosion, impact test and SEM.
采用浸泡腐蚀试验和腐蚀前后的冲击试验并借助于扫描电镜观察，研究了热强碱介质中高锰钢的腐蚀速率和冲击韧度。
Engineering ceramics feature resistance to high temperature, corrosion, wear and hot impact.
工程陶瓷材料具有耐高温、耐腐蚀、抗磨损及抗热冲击等优点。
Effects of re on the corrosion resistance of aluminum hot dipped parts were studied by adding tiny quantity of rare earth element to the liquid aluminum.
分析了热浸镀铝层中稀土的含量对镀件在不同化学介质中耐腐蚀性能的影响。
The BF liners were damaged seriously under the influence of hot metal melting , chemical corrosion of slag and accretion in the middle and later term.
由于铁水熔融金属以及炉渣的化学侵蚀和炉瘤的影响，高炉中后期炉衬受损严重。
Analyses the causes of smoke condensation and corrosion in gas-fired hot water boilers. Points out preventing measures in boiler design and operation.
分析了燃气热水锅炉烟气结露及腐蚀原因，从锅炉房设计与运行管理两方面提出了预防措施。
The causes and mechanisms of oxygen corrosion, and the application of desorption removing oxygen device in hot water boiler are analyzed.
就热水锅炉氧腐蚀的原因、机理及解吸除氧在热水锅炉上的应用作了分析。
The paper causes oxygen corrosion for hot water heating system and points out the ways of removing the corrosion.
分析了热水供暖系统氧腐蚀的原因及危害，指出了除氧途径。
In continuous hot-dip galvanization process the corrosion and chemical stability of the sink roll in the galvanizing bath are important problem which effects on the quality and productivity.
在连续热镀锌生产过程中，在熔融锌槽中，沉没辊的耐蚀性和化学稳定性是影响产品质量和生产率的重要因素。
Corrosion resistance can be comparable with hot dip galvanizing, or even better than hot dip galvanized steel.
防腐性能可以与热镀锌相媲美，甚至优于热镀锌。
Hot dipping is the most economic and efficient technology to protect iron material from corrosion in nature circumstance.
热浸镀技术是防止钢铁材料在自然环境中受腐蚀的最经济有效的防护技术。
In view of liquid zinc corrosion problem to be settled urgently in the hot galvanizing industry, the micro-design of material is done based on corrosion theory and metal theory.
针对当前热镀锌行业亟待解决的液态锌腐蚀问题，依据腐蚀理论和金属理论对材料进行微观设计。
In view of liquid zinc corrosion problem to be settled urgently in the hot galvanizing industry, the micro-design of material is done based on corrosion theory and metal theory.
针对当前热镀锌行业亟待解决的液态锌腐蚀问题，依据腐蚀理论和金属理论对材料进行微观设计。
应用推荐