The increase of hot blast temperature by means of staggered parallel blasting in hot stoves is discussed.
本文讨论利用交错并联送风方式提高热风温度。
Hot blast temperature was notably increased through suitable revamping, greatly extending the service life of the stove and achieving good results.
通过合理的改造，热风温度有了明显的提高，炉子寿命大大延长，取得了良好的效果。
Oven is heated by hot blast air circularly and equably automatic control of temperature.
采用热风循环加热，烘箱加热均匀，温度全自动控制。
The significance in increasing theoretical hot stove burning temperature by blast furnace gas enriching and separating was expounded in this paper.
论述了高炉煤气富化分离对提高热风炉理论燃烧温度的重要意义。
With the structure and material of burner of stove improved the burning effect of gas gets better, blasting temperature of hot blast stove raised and working life of stove prolonged.
通过改进热风炉燃烧器的结构和材质，提高了煤气的燃烧效果及热风炉的送风温度，延长了热风炉寿命。
Distribution uniformity of flue gases in brick cell of hot stove has a great influence on its work conditions and blast temperature.
热风炉格子砖烟气分布是否均匀，对热风炉的工作状态和鼓风加热温度有很大影响。
Alumina content in Nanjing Steel blast furnace slag is up to 19%, which results in worse slag fluidity, higher furnace operating temperature and higher silicon content of hot metal.
南京钢铁集团公司高炉炉渣中氧化铝含量高达19%，因此炉渣流动性变差，高炉被迫采用高温操作，铁水硅含量偏高，影响了高炉的强化。
The technology of high temperature preheating and high temperature and long campaign life hot blast stove had been adopted during the Shougang's no. 2 BF technology rebuild design.
首钢2号高炉技术改造设计采用了高温预热及高风温长寿热风炉技术。
The top-firing air and gas self-preheating hot blast stove adopts a patented burner and high blast temperature bypass flue.
顶燃式空气、煤气自身双预热热风炉采用了顶燃式燃烧器热风炉专利的燃烧器技术和高温旁通烟道技术。
The top-firing air and gas self-preheating hot blast stove adopts a patented burner and high blast temperature bypass flue.
顶燃式空气、煤气自身双预热热风炉采用了顶燃式燃烧器热风炉专利的燃烧器技术和高温旁通烟道技术。
Increasing the temperature of hot blast is an important measure for higher coal rate and lower fuel rate of blast furnace.
提高热风温度是高炉增加喷煤量和降低燃料比的重要措施。
RUL, creeping in middle temperature and thermal shock properties are excellent. These products are popular for the middle-low temperature parts of hot blast stove.
产品荷重软化温度较高，抗中温蠕变性能好，抗热冲击性能好，是热风炉中低温部位用的主要耐火材料。
This paper introduces the effect of reaction at static state and che influence of slags composition, temperature of slags and hot metal on silicon transmission in the blast furnace.
本文介绍渣—铁之间静止状态下的反应对高炉内硅迁移曲作用及炉渣成份和渣铁湿度对硅迁移的影响。
Coke gas was introduced into blast furnace hot air stove by use of ejector to increase air temperature so as to achieve the aim of reducing coke rate and increasing the production.
利用引射器将低压焦炉煤气引入高炉热风炉中以提高风温，达到了降低焦比、提高生铁产量之目的。
Based on the base construction of hot-blast stove the construction technique of large bulky concrete and method to control temperature crevice in concrete are introduced.
通过热风炉基础施工，介绍了大体积混凝土的施工技术及防止混凝土温度裂缝的控制方法。
The high blast temperature technology by top combustion preheating furnace preheating the intensifying combusted air is used for the hot stoves of New no. 2 and no. 3 BFs in Angang.
鞍钢新2号、新3号高炉热风炉应用了顶燃式预热炉来预热助燃空气的高风温技术。
A nozzle is arranged in the damp heat air duct, which can adjust the temperature and humidity of the damp hot blast.
在湿热风管中设置有调节湿热风温度和湿度的喷嘴。
It shows that blast temperature can be improved in effect by regulating operation parameter of hot blast stove.
研究结果表明通过调整热风炉操作参数，可以有效提高风温。
Tt is necessary to select refractories carefully in order to meet the requirements for high temperature hot blast and long life of hot blast stove.
为了满足热风炉高风温和长寿的需要，必须认真选择耐火材料。
The top-firing air and gas self-preheating hot-blast stove adopts a patented burner and high blast temperature bypass flue.
顶燃式空气、煤气自身双预热热风炉采用了顶燃式燃烧器热风炉专利的燃烧器技术和高温旁通烟道技术。
The utility model relates to a sub-header high-temp. hot-air furnace which is the improvement for the air heater of the existing high-temperature hot blast furnace.
分联箱式高温热风炉是对现有高温热风炉空气加热器部分的改进。
The utility model relates to a sub-header high-temp. hot-air furnace which is the improvement for the air heater of the existing high-temperature hot blast furnace.
分联箱式高温热风炉是对现有高温热风炉空气加热器部分的改进。
应用推荐