Investigation results show that this system is simple in structure, easy in operation and reliable in function, providing the hot-pressing machine design with optimum parameters.
试验结果表明该系统结构简单，操作方便，运行可靠，可为热压成型机的设计提供优化参数。
Its handle is made of plastics, and is formed by hot-pressing waste plastic particles and rubber powder.
它的手柄是塑料的，主要由废塑料粒子、橡胶粉等热压制成。
When in hot-pressing edge covering, nitrogen flushing is carried out and instant cooling can be realized.
热压包边时进行氮气冲刷、瞬间冷却。
The purpose of this paper is to study the technology for manufacturing wood-cement particleboard by hot-pressing.
本文主要论述了热压法制造水泥刨花板的工艺。
Influence of hot-pressing time, temperature and pressure on the porosity and compressive strength of the scaffold.
不同热压时间、温度、压力对支架孔隙率及抗压强度的影响。
Material model of plywood is established to study change of material property in hot-pressing consolidation process.
建立了胶合板的材料模型，以研究热压固化过程中材料性能的改变。
The bulk graphite was prepared from starting materials of calcined coke and coal-tar pitch by the hot-pressing process.
以煅烧石油焦为基本填料，煤沥青为粘结剂，采用热压工艺制备石墨制品。
Magnesium fluoride is widely used in the preparation of hot-pressing crystal, vacuum coating material and optical glass.
氟化镁广泛用于热压晶体、真空镀膜和光学玻璃的制备。
The composite sheets were fabricated from cospinning or blend-weaving textiles of modified ramie fibers and polymer in hot-pressing.
本文将改性的苎麻与树脂混纺或混织的织物在热压机上压制成苎麻纤维与树脂的复合板材。
The density can affect the thermoelectric properties. Proper hot-pressing condition can make ZT values reach the maximum of about 0.45.
致密度可以影响材料的热电性能，适当的热压条件可以使合金的ZT值达到最大，约为0.45。
Vapor grown carbon fiber (VGCF) was mixed in the catalyst layer of the air electrode for zinc-air battery, prepared by hot-pressing method.
将气相生长碳纤维(VGCF)加入到锌空气电池空气电极催化层中，通过热压成型制备三相气体扩散电极。
To improve electric function of the foil type capacitors, the processing cutting, winding, hot-pressing, welding and immersion was investigated.
为了改善箔式电容器的抗电性能，对切割、卷绕、热压、焊接和浸渍工艺进行了研究。
The lithium disilicate glass-ceramics and their composites with high relative density were prepared by melting method and hot-pressing technology, respectively.
本文分别采用熔融法和热压烧结工艺制备了致密的二硅酸锂微晶玻璃及其复合材料。
The results reveal that the increase of the sintering temperature and the hot-pressing pressure can promote the formation of cristobalite in the fibrous composites.
结果表明热压烧结温度和压力对复合材料中方石英的析出有着显著的促进作用；
The SEM fractographs show that the composite interfacial films between the fibre and the matrix are thickened with the increase of the hot-pressing time or pressures.
此外，断口形貌的SEM观察表明，随保温时间的延长或热压压力的提高，复合材料界面层变厚。
The results show that interface element diffusion and reaction on interface in vacuum hot-pressing sintering processing improved interface strength. Fracture occurred mainly in Al matrix.
结果表明，真空烧结过程中出现了界面反应，改善了界面结合强度，断裂破坏主要在基体上进行。
An account is given of the requirements for equipment, adhesive, particle preparation, hot-pressing technology and testing methods when producing Grade E_1 particleboard with E_1 UF resin.
介绍在采用E_1级脲醛树脂胶的情况下，生产e_1级刨花板对设备、胶粘剂、刨花制备、热压工艺及检测的要求。
Three series of experiments were carried out to observe the effects of composition, presintering schedule, particle size of fe powders, compacting pressure, sintering time and hot-pressing.
进行了三组实验以观察成分、预烧结制度、铁粉颗粒大小，压制压力，烧结时间和热压的作用。
The results showed that the panel properties can be obviously affected not only by the parameters of defibering and hot-pressing, but also by the amount of adhesive and water-repellent agent.
试验结果表明：胶粘剂和防水剂的添加量、热磨和热压条件对板材性能有显著影响。
Taking modified MF and PF resin as the adhesive and using "cool-hot-cool" technology, this paper designs two groups of technological parameters of hot-pressing to press bamboo curtain plywood.
以改性三聚氰胺甲醛树脂（MF树脂）和酚醛树脂（PF树脂）为胶粘剂，设计了两组热压工艺参数，按照“冷-热-冷”工艺压制竹帘胶合板。
The process for producing the insulating steel paperboard adopts the one-step forming technology, the vacuum dehydrating technology and the high-temperature hot-pressing and drying technology.
它采用一次成型，真空脱水，高温热压干燥的生产工艺技术。
There are some obviously different points between medium density fiberboard(MDF) hot pressing technology by continuous press and multi opening press.
连续平压法生产MDF与多层压机生产在热压工艺上有着明显的区别。
The powder can be directly consolidated into blocks via hot pressing.
这些粉末可以通过热压形成整块。
The direct steam curing after the unloading of hot pressing CPB could greatly accelerate thc hydration of cement.
板坯卸出压机后的直接蒸养可大大加速水泥的水化过程。
This paper describes the application results of Carborundum and cast stone in mineral processing equipment as well as the hot pressing technology for producing them.
本文叙述了绿碳化硅砂、铸石砂在选矿设备中的应用效果以及热压生产工艺。
The bonding may be carried out by hot pressing or by using an adhesive.
粘合可采用热压或黏结剂实现。
This article describes a hot pressing formation technology to make flanged openings on special jacketed vessel shells.
介绍在特殊夹层压力容器制造中对夹层壳体壁上进行开孔翻边热冲压成形的工艺技术。
This article describes a hot pressing formation technology to make flanged openings on special jacketed vessel shells.
介绍在特殊夹层压力容器制造中对夹层壳体壁上进行开孔翻边热冲压成形的工艺技术。
应用推荐