Remember: Although it is not displayed here, target 7 is always reserved for the SCSI host adapter.
记住：尽管这里没有显示，目标7总是被保留用于SCSI主机适配器。
Each physical link includes a host adapter in the primary disk subsystem and a host adapter in the secondary disk subsystem.
每条物理链路包括一个位于主磁盘子系统中的主机适配器，以及一个位于辅助磁盘子系统中的主机适配器。
First, you need press Ctrl-Q to select the Host Adapter page when your server posts the Qlogic self-test. You should get something like you see in Figure 9.
首先，您在服务器发布Qlogic自检时需要按下Ctrl - Q选择Host Adapter页面，如图9所示。
Configure the host adapter driver to be loaded through an initial RAM disk, which applies the configuration data for redundant disks when loading the adapter module at boot time.
配置主机适配器驱动程序，通过初始ram磁盘进行加载，初始ram磁盘将在引导过程中加载适配器模块时对冗余磁盘应用配置数据。
Each network adapter should be configured with a boot address and associated host name.
每个网络适配器应该配置一个引导地址和相关联的主机名。
Only when the application starts can the resource adapter verify whether properties such as host names and port Numbers are correct.
只有当应用程序启动时，资源适配器才能验证类似于主机名称和端口号这样的属性是否正确。
Your host has an active network adapter that can be used to send out the request.
您的主机有一个活跃的网络适配器，可以使用它发送请求。
The target host is running and has an active network adapter configured with the IP address that you used.
目标主机正在运行，而且在您使用的IP地址上配置了活跃的网络适配器。
A host name is associated with a network adapter.
主机名与一个网络适配器相关联。
External address space applications are required to first use one of the optimized local adapter server APIs (Host service or Receive Request) and identify themselves as target services.
外部地址空间应用程序需要首先使用一个优化的本地适配器服务器API(主机服务或接收请求)并标识它们自身作为目标服务。
If it isn't, there may be a problem with the physical connection from the network adapter on your host to the gateway (for example, a faulty switch port, cable, network card).
如果无法到达这个网关，那么从您主机上的网络适配器到网关的物理连接可能有问题（例如交换机端口、线路和网卡有故障）。
Once you have configured your data adapter, you can generate the data set definition that will host your data adapter disconnected result sets.
一旦配置了数据适配器，您就可以生成数据集定义了，该数据集将存储您的数据适配器断开连接的结果集。
In the case of the FTP adapter pattern, for example, you need to provide only the host name of the FTP server, the directories and the format of the input and output files.
例如，在FT p适配器模式的情况下，您只需提供FTP服务器的主机名称、输入和输出文件的目录和格式。
Initiators may be provided as an on-board component on the motherboard or as an add-on host bus adapter.
发起者可以是主板上的组件或附加的主机总线适配器。
You should ensure that the adapter used to send packets out to your host is showing as UP and RUNNING.
应该确认用来向主机发送请求的适配器显示为UP和RUNNING。
HOD 3270 resource adapter for access to host systems with 3270 screens.
用于访问带3270屏幕的主机系统的HOD 3270资源适配器。
reserve : This command is issued by a host bus adapter to obtain or maintain ownership of a SCSI device.
reserve（占用） :这个命令由总线适配器发送用以获得或保留对SCSI设备的所有权。
Release: This command is issued by the owning host bus adapter when a disk resource is taken offline; it frees a SCSI device for another host bus adapter to reserve.
release(释放)：当磁盘资源下线的时候，这个命令由拥有该磁盘的总线适配器发送。这个命令释放该SCSI设备供其他总线适配器占用。
On a write, the DIF is generated by the host bus adapter (HBA), based on the block data and logical block address.
在写数据时，主机总线适配器(HBA)根据块数据和逻辑块地址生成dif。
Some switches generate a route table that includes the IP address of the host and the MAC address of the adapter that owns the IP address.
有些交换机生成一个路由表，其中包含了主机的IP地址和IP地址所在配置器的mac地址。
The ANSI T10 standard provides a way to check the integrity of data read and written from the host bus adapter to the disk and back through the SAN fabric.
ANSIT10标准提供一种方法检查从主机总线适配器 （HBA）通过SAN 光纤写到磁盘和读取回的数据的完整性。
If the adapter is up, you can establish whether the route from your host to the target is correct by using route get (see Listing 5).
如果适配器已经打开了，可以使用routeget检查从您的主机到目标主机的路由是否正确(见清单5)。
For the DS4800 storage server, IBM recommends and provides the RDAC driver to use on top of the HBA (host bust adapter) driver.
对于DS4800存储服务器，IBM推荐并提供了RDAC驱动程序，该驱动程序可在HBA (hostbustadapter)驱动程序上使用。
The experience device consists of host software, specified bandwidth wireless network, digital media adapter, VQM software, subjective video quality evaluation system, etc.
实验框架由主机端软件、特定传输带宽的无线网络、数字媒体适配器、VQM 软件、主观视频质量评价系统等组成。
Limit Full bandwidth performance may not be achieved with more than one adapter per PCI Host Bridge (PHB) or more than one CPU.
限制全带宽性能可能无法实现一个以上的PCI主机适配器每大桥基丁酸酯(PHB)或一个以上的CPU。
A method, apparatus and program storage device for automatically presenting status from a host bus adapter until an error is detected is provided.
提供一种方法、装置和程序存储设备，用于自动呈现来自主机总线适配器的状态信息，直至检测到差错。
It is also called a network adapter. Its function is to adapt the host device to network medium.
它也被称为网络适配器，其功能是使主机适应网络介质。
Data is transmitted between the host bus adapter and a host.
主机总线适配器向主机传送数据。
The following example shows how to set the lifetime token handle in a host-side adapter.
下面的示例演示如何在宿主端适配器中设置生存期标记句柄。
The following example shows how to set the lifetime token handle in a host-side adapter.
下面的示例演示如何在宿主端适配器中设置生存期标记句柄。
应用推荐