HCI command Packets: commands are issued by the HCI Driver to the Host controller.
HCI命令数据包：命令(command)由HCI驱动程序发至主机控制器。
At the switch fabric, I put the first WWPN of the host HBA into one zone, along with a WWPN of storage controller a.
在switchfabric，我将主机hba的第一个WWPN与存储控制器a的一个WWPN一起放入一个区域。
The device descriptor read by the host controller driver contains information about the device, such as class, subclass, and protocol.
主机控制器设备驱动程序读取的设备描述符包含关于设备的信息，例如class、subclass和protocol。
Each host USES a different connection to the controller to spread the load and maximize the throughput.
每个主机使用不同的连接连至控制器以分散负荷及最大化吞吐量。
USB host controllers follow one of two standards: UHCI (Universal host controller Interface) or OHCI (Open host controller Interface).
usb主机控制器遵循两个标准之一：UHCI(通用主机控制器接口)或OHCI(开放式主机控制器接口)。
The nacelle control system of intelligent wind generator is based on fuzzy control. Host computer adopted the fuzzy controller 80c552 of single chip microcomputer.
基于模糊控制的智能风力发电机机舱控制系统，主机采用单片机模糊控制器80c552。
This paper designed and implemented a USB host controller soft core that can be used in mobile devices.
本文的目的就是要设计并实现一个可集成在便携、移动产品上的USB主机控制器软核。
Finally, the USB2.0 host controller SoC was implemented and validated on FPGA development platform.
最后，本文利用FPGA开发平台对usb2.0主机控制器片上系统进行了验证。
A host controller transfers data over a bus communication system, under the control of a processor, in individual transactions.
一种主机控制器在处理器的控制下经由总线通信系统在单独事务中传送数据。
This design provides feasible and effective implementations for embedding USB host controller in the SOPC system, expands the peripheral interfaces of SOPC system. It is of higher application value.
本设计为SOPC系统中嵌入usb主机控制器提供了有效可行的实现方案，拓展了SOPC系统的外设接口，具有较高的应用价值。
The controller 218 converts commands from the host into command signals that can be interpreted and executed by command circuits 214, which are in communication with the state machine 216.
控制器218将来自主机的命令转换为可由与状态机216通信的命令电路214解译和执行的命令信号。
This paper introduced the communication principle of USB2.0' protocol layer and the division, design and realization of the core part of USB2.0' host port controller.
本文简要介绍了USB2.0协议层的通信原理，描述了USB2.0主机端控制器核心部分的划分、设计及实现。
Enabling the communications includes delivering an array of bytes from the mobile controller device to the host device.
实现所述通信的步骤包括从所述移动控制器装置向所述主机装置递送一系列字节。
The ECC controller transmits the data to a direct memory access (DMA) buffer for transfer to the host device, and to an ECC block for error detection and correction of the data.
ECC控制器将数据发送给用于将数 据传送到主机装置的直接存储器存取（DMA）缓冲器以及用于对数据进行错误检测和纠错的ECC块。
At last, the development of motion controller driver software and host application program is finished, and the results of the applied experiments show the CNC software system is satisfactory.
最后，我们完成了运动控制器驱动程序和开放式数控系统应用程序的开发工作，并在实际应用中取得了满意的效果。
The hub repeater is responsible for managing connectivity on a per packet basis, while the hub controller provides status and control, and permits host access to the hub.
集线器中继器负责管理基于包的连接，而集线器控制器则提供状态信息和控制操作以支持主机访问。
The photoflash controller may be capable of receiving the signal from the ambient light sensor and a host signal from a main controller of the digital camera.
该闪光灯控制器能够从环境光传感器接收信号、从数码相机主控制器接收一个主机信号。
The HCI protocol is the communication protocol between the host and host controller to provide a uniform method accessing Bluetooth host controller capabilities.
HCI协议是主机和主机控制器之间的通信协议，提供了统一访问蓝牙主机控制器的能力。
The communication link way, communication commands and communication data structure between host computer and OMRON V600 Series RFID controller are introduced.
介绍上位机与欧姆龙V600系列RFID控制器串行通信连接方式、通信命令和通信数据帧格式。
Each build machine can host a single build controller.
每台生成计算机都可以承载一个生成控制器。
The controller is used to translate requests coming from host port because DDR2 SDRAM could not execute these com- mands directly.
DDR2内存不能直接识别主端口的请求命令，必须经由内存控制器处理后才能执行。
On the host page, select the host for the Agent Controller.
在Host页面，选择代理控制器的主机。
The Linux card services core interacts with the host controller device driver, the card device drivers, and the user mode cardmgr daemon.
linux卡服务核心与主机控制器设备驱动程序、卡设备驱动程序及用户模式cardmgr后台进程交互。
This layer is literally the interface between the host (your computer) and the controller (the Bluetooth device).
这一层顾名思义就是主机(计算机)和控制器(蓝牙设备)之间的接口。
Once you've built your scripts controller, you have a whole host of options for executing scripts using the Zend Framework.
在构建了脚本控制器后，您有许多选项可用于通过Zend框架执行脚本。
The USB host controller is connected to a USB device comprising one or more end points, and comprises a buffer.
USB主机控制器连接到包括一个或多个端点的USB设备，并且包括缓冲器。
Thus, the controller (or control capability) can be embedded in the host or included within a removable memory system.
因此，控制器(或控制能力)可内嵌在主机中或包含在可移除存储器系统内。
The controller 218 is connected or connectable with a host system such as a personal computer, a digital camera, personal digital assistant, etc.
控制器218与或可与例如个人计算机、数码相机、个人数字助理等主机系统连接。
The controller 218 communicates with the host in order to receive commands and data from the host, and provide data and status information to the host.
控制器218与主机通信以便从主机接收命令和数据，并向主机提供数据和状态信息。
Group control host is the core of the elevator group control system. It serves as the traffic controller and makes the elevators orderly and efficient.
群控主机是电梯群控系统的核心，它起着交通指挥员的作用，使群控系统中的电梯群有序高效地运行。
应用推荐