High temperature solid liquid change thermal energy storage (TES) canister is a key component of heat receiver.
高温固液相变蓄热容器是空间太阳能动力装置吸热-储热器的关键部件。
Samarium and manganese co-doped zinc borosilicate storage glasses were prepared by high temperature solid state method.
使用高温固相法合成了钐锰共激活的硼硅锌玻璃。
In order to ensure the impartiality of the experiment data, the traditional high temperature solid synthesis and sinter method are used to prepare the sample.
为了保证均匀设计试验的整齐可比性，采用高温固相合成，而后高温烧结制得测试样品的方法。
Recently, porous silicon nitride materials have attracted much attention because of their potential applications in high temperature solid base catalyst, sensors and so on.
近年来，多孔氮化硅基材料因为在高温固体碱催化、传感器等领域的潜在应用，而受到广泛的关注。
It is more bright, has low hardness, low temperature of synthesis and requires less time in synthesis when compared with products synthesized by high temperature solid-phase reactions.
与高温固相反应法比，该方法具有合成温度低，反应时间短，所得产物硬度小，发光亮度好等优点。
The specific work and conclusions are as the follows: (1) Mixture of ethanol and water vapor is applied to high temperature solid oxide fuel cell based on the ethanol steam reforming reaction.
具体工作及结论如下：(1)以乙醇的水蒸汽重整反应为基础，将其应用到高温固体氧化物燃料电池中。
The synthetic methods of LiFePO4, such as high temperature solid state reaction method, sol-gel method, microwave radiation method, hydrothermal method and co-precipitation method, were summarized.
综述了高温固相反应法、溶胶-凝胶法、微波合成法、水热合成法和共沉淀法制备磷酸铁锂的方法。
And it does so at a high enough temperature to ignite the solid fuel.
在足以点燃固体燃料的高温中，HTP就是这样反应的。
Semi-Solid Metal shows good flowable behaviour so that it could be manufactured easily by general working methods, and it also has some advantages such as low working temperature, high quality etc.
半固态金属具有良好的流动性，易于通过普通加工方法制成产品，并且具有加工温度低，产品质量高等优点。
Divide by indirect measurement of pressure gauges, to measure the viscosity, easy to crystallization, corrosive, high temperature of the liquid, gas or granular solid media pressure.
隔膜压力表采用间接测量结构，适用于测量粘度大、易结晶、腐蚀性大、温度较高的液体、气体或颗粒状固体介质的压力。
The gross structure, principle of work and design gist of High-temperature and High-pressure rotary valve in pneumatic conveying system with solid wateric were introcued.
介绍了固体物料气力输送系统高温高压旋转阀的总体结构、工作原理、设计要点及其应用效果。
With the steel line and the solid phase of the high and low liquidus temperature and crystallization temperature of the size of interval.
它们与钢的固相线和液相线温度的高低及结晶温度区间的大小有关。
How to elect the solid image sensor in accord with the requirement of high temperature measurement is an important problem.
如何选择能符合温度测量要求的固体摄像器件是值得重视的问题。
High temperature gas solid suspension reactor was used to simulate decomposition of cement raw meal.
应用高温气固悬浮实验台对水泥生料在预分解炉中分解动力学的过程进行了模拟实验。
The temperature of a high temperature, high pressure plume solid propellant rocket engine is difficult to measure but is useful for determining the combustion status of the engine.
对于固体火箭发动机羽焰温度的测量是困难的，了解其温度分布对于研究发动机内燃烧流场的特性有重要价值。
High granular temperature of particles appeared the intensity turbulence of gas-solid jetting flow.
气固两相射流具有高的颗粒温度，呈现强烈的气固两相湍流流动特性。
The main deoxidized product of the dephophorus reaction with solid carbon is gas P_2in high temperature.
研究结果表明：在高温条件下，固体碳气化脱磷反应的主要还原产物是P_2气体。
Natural Gas Hydrate occurs at conditions of low temperature and high pressure, it is a special solid crystal compound composed of natural gas molecule and water molecule.
天然气水合物是在低温高压环境下由水分子和气体分子构成的结晶状特殊固体化和物，它主要分布于永久冻土带及浅海大陆架及深海平原沉积物中。
The conductivity of sputtered YSZ thin film is high and would be a good solid electrolyte for using in high temperature electrochemistry.
薄膜具有较高的电导率，完全可以作为固体电解质使用。
The microstructure and composition of a high chromium cast stainless steel used in high temperature aqueous alkali with solid grains were designed.
设计了用于含有固相颗粒的高温碱介质中的新型高铬铸造不锈钢的组织及化学成分。
The La-Ni oxides synthesized by solid state reaction at room temperature shows a high photo-catalytic activity in degrading reactive dyes.
采用室温固相反应法制备的镧镍氧化物对活性染料具有较好的光催化效果。
A new technique named self propagating high temperature synthesis was proposed to prepare V-based solid solution storage hydrogen alloys.
提出采用自蔓延高温合成法制备钒基固溶体贮氢合金的新工艺。
Infrared radiation of the systems are caused by high temperature due to fuel combustion, and can be grouped into two kinds, radiation from solid surface and radiation from exhausted gases.
喷气动力装置的红外辐射来源于燃烧引起的高温，并可区分为两大类：固体表面的辐射和热喷流的辐射。
They are: sodium-sulfur battery, solid state lithium battery, high temperature fuel cell and sodium heat engine.
介绍了钠硫电池、全固态锂电池，高温燃料电池、钠热机等方面的研究现状和发展趋势。
The laser technique can test solid precipitation at high temperature and pressure for a system of oil and gas.
激光法适合于高温、高压以及含气原油体系的固相沉积点的测定。
In this paper, materials selection and preventing solid particle erosion measures of ultra-supercritical steam turbine's high temperature parts are introduced.
介绍了目前国内外关于超超临界汽轮机高温部件的材料选择及其对高温部件固粒侵蚀所采取的防止措施。
This instrument can be used for study on the structure of mother liquor grown high temperature crystals and the change of structure during the liquid solid phase transfer.
该装置可用于研究高温晶体生长过程中母液相的结构以及固-液相转变过程中结构的变化。
The host of LaOBr, which has defect luminescence, was synthesized by high-temperature solid-state method.
用高温固相法合成了具有缺陷发光的溴氧化镧基质。
Sample of porous SiC polycrystals are prepared by solid sintering process under high temperature and normal pressure using moulding SiC powder.
碳化硅粉末经压制成型后，在高温常压下固相烧结制成多孔碳化硅样品。
Sample of porous SiC polycrystals are prepared by solid sintering process under high temperature and normal pressure using moulding SiC powder.
碳化硅粉末经压制成型后，在高温常压下固相烧结制成多孔碳化硅样品。
应用推荐