Research state of these two high temperature materials at home and abroad was summarized with focus.
重点叙述了两种高温材料的国内外研究现状；
The high temperature materials, phased array sensor, and low current requirements stabilize the output signals over a wide range of input voltage, ambient temperature, or output frequencies.
高温材料，相控阵传感器，低电流的要求较稳定的输入电压，环境温度，或输出频率范围的输出信号。
Repair technology, property testing techniques at high and low temperature, characterization and quality control as well as ap-plied basic research of composite materials are also briefly introduced.
对复合材料的修补技术、高低温性能测试技术、性能表征与质量控制以及应用基础研究也作了简要介绍。
Avoid operate or reserve in the room with high air pressure, humidity and temperature out of the required standard, airless, or the objects of flammable, explosive, corrosive materials.
避免在气压过大，湿度、温度超出规定标准，通风不良，或有易燃、易爆、强腐蚀性物品的场所使用、贮存。
The resistance furnace can be heated to very high temperatures, the supplies graphitizing furnace carbon materials, for example, can put the material heated to a temperature of more than 2500.
这种电阻炉可以把物料加热到很高的温度，例如碳素材料石墨化电炉，能把物料加热到超过2500。
Simply put, the general building materials (such as wood, gypsum board to the metal ceiling) when subjected to high temperature or combustion will spread the fire and heat to other locations.
简单地说，一般建材(如木材、石膏板其至金属天花)当受到高温或燃烧后都会将火和热蔓延至其它位置。
In this process, microwave heating is used to make ceramic materials plastifying under a high temperature, so that a good machinability can be achieved.
该方法利用微波加热使陶瓷材料在较高温度下塑性化，从而获得到较好的加工性。
Rock wool insulating tubes is basalt and other natural ore, etc as main raw materials, by high temperature melting in a fiber, stir-in binder, curing processing and is made.
岩棉保温管是以玄武岩及其它天然矿石等为主要原料，经高温熔融成纤，加入适量粘结剂，固化加工而制成的。
Results showed that the high temperature adhesive cured at room temperature had satisfied bonding performance for graphite materials.
结果表明，室温固化型高温粘结剂对石墨材料具有良好的粘接性能。
Manufacture of this device requires such materials as can bear high temperature and pressure.
制造这种装置需要能耐高温、高压的材料。
The two sealing materials could be used to high temperature sealing of metal slit and high temperature protection of metal surface.
这两种密封材料均可以用于金属缝隙的高温密封和金属表面的高温防护。
The rupture of corundum-mullite materials was controlled by crack at room temperature and creep at high temperature.
刚玉莫来石材料的断裂在室温下由裂纹扩展控制，在高温下由蠕变机制控制。
We want such materials as can bear high temperature and pressure.
我们需要能够耐高温、高压的材料。
The latest research of the microwave high-temperature heating technology applied on theory and modeling, construction materials and functional materials are reviewed.
本文总结了近年来微波高温加热技术在理论与模拟、结构材料和功能材料方面的研究进展。
Nb-based alloys are important high temperature structural materials because of their high melting temperature, corrosion resistance, and high temperature strength.
铌及铌合金以其熔点高、耐腐蚀和良好的高温强度成为重要的高温结构材料。
It requires such materials as can bear high temperature and pressure.
这需要能耐高温高压的材料。
These are bolting materials suitable for high temperature service with austenitic stainless steel valve materials.
这些是适用于高温应用环境的奥氏体不锈钢阀门的螺栓材料。
The results shows: (1) The major problem of choosing container materials is oxidation and erosion of liquid metal in high temperature.
研究结果表明：(1)高温氧化起皮剥落以及金属液体浸蚀是选择容器材料遇到的主要问题。
Brown aluminium oxide abrasive is fused and crystallized under high temperature from a mixture of bauxite and other materials.
布朗的三氧化二铝磨料，是融合和凝结着高温条件下，从混合铝土矿和其他材料。
The test results of non-ablative ultra-high temperature ceramic materials(UHTC) in one of the plasma wind tunnels of CARDC are introduced in this paper.
介绍了在CARDC等离子体风洞中开展的非烧蚀型防热材料超高温陶瓷（UHTC）的试验研究结果。
Superheated steam drying is a drying technique of using high temperature steam to evaporate materials inner water, it has feature of drying quickly, quality good, saving Energy and so on.
过热蒸汽干燥技术是使用高温蒸汽将密闭的环境中的物料内部的水分蒸发出来的干燥技术，具有干燥速度快，干燥品质好，节能等特点。
Basing on the modified SCG model, a high temperature and high pressure constitutive relation of materials is proposed.
本文在修正的SCG模型基础上，提出了一种考虑了熔化潜热的高温高压本构。
Characteristics and limitations of some important life prediction methods are analyzed with emphasis on SCC of engineering materials used in high temperature water in nuclear power plants.
以核电工程材料在高温水中的应力腐蚀破裂为重点，分析了几种重要的寿命预测方法的特点与局限性。
This paper reviewed recent research advances in preparing high temperature superconducting thin films and crystal materials with lasers.
本文综述了近年来利用激光制备高温超导薄膜和超导单晶材料的研究进展。
A high temperature open resonator measuring system for low loss radome materials is introduced.
介绍了一种测量低损耗天线罩材料的开腔高温自动测量系统。
Plasma arc cutting is a physical process which utilize high temperature to heat materials and high speed flow to blow melted metal, cutting quality is directly influenced by arc power and arc force.
等离子体弧切割是通过高温等离子体弧将工件弧柱部分的材料熔化并利用高速离子流将切渣吹除的物理过程，弧柱的功率和作用力将直接影响到切口质量。
Plasma arc cutting is a physical process which utilize high temperature to heat materials and high speed flow to blow melted metal, cutting quality is directly influenced by arc power and arc force.
等离子体弧切割是通过高温等离子体弧将工件弧柱部分的材料熔化并利用高速离子流将切渣吹除的物理过程，弧柱的功率和作用力将直接影响到切口质量。
应用推荐