In this paper, the thermal elastic-plastic stresses of the components which underwent local high temperature cycle were analyzed by FEM.
本文对局部经受高温热循环构件的热弹塑性应力进行了有限元分析。
Wash the garment in the washing machine on the longest cycle available, with the temperature set to hot, then tumble dry it at a high temperature.
用罽洗衣机最长的清洗周期洗涤衣服，并将温度设置为高温，然后在高温下将其烘干。
The results show that fatigue, creep and oxidation damage always develops simultaneously during low cycle fatigue at high temperature.
试样的微观断口分析显示了在高温应变疲劳试验中同时存在疲劳、蠕变和氧化损伤。
High temperature low cycle fatigue (HLF) life prediction models have great significance for design of high temperature structure under cycLic loading.
高温低周疲劳(HLF)寿命预测方法对于承受变幅载荷的高温构件的设计具有重要意义。
The results showed that at room temperature, the battery had excellent cycle stability and high discharge voltage platform.
结果表明：在室温条件下，电池具有较好的循环稳定性和较高的放电电压平台。
Excellent high and low temperature cycle stability and has good mechanical processing of.
优异的高低温循环稳定性并有良好的机械加工性。
The cycle performance at 0.5c discharge rate is very good but bad at high discharge rate (1.0c). The low temperature performance also needs to be improved.
电池的低倍率放电(0.5C)循环性能良好，但高倍率(1.0C)循环性能不太好，电池的低温性能也有待提高。
In view of interlayer and areal problem after multi cycle of huff and puff, a new high temperature temporary blocking agent has been developed through laboratory experiment and field test.
针对稠油蒸汽吞吐开采过程中多轮次吞吐后层间及平面矛盾突出的问题，通过室内及现场试验，研制出一种新型高温暂堵剂。
WANG K, YAN Z F, WANG W X, et al. Temperature evolution and fatigue properties prediction for high cycle fatigue of magnesium alloy[J]. Journal of materials Engineering, 2014, (1):85-89.
[28]王凯，闫志峰， 王文先， 等。循环载荷作用下镁合金温度演化及高周疲劳性能预测[J]。材料工程，2014，（1）：85-89。
The individual cycle-strain hysteresis loops were recorded, and the cycling response and high temperature low cycle fatigue life were obtained.
记录了各自的循环应力—应变滞后环，得出了试样的循环响应特征和各试样的高温低周疲劳寿命。
In addition the features of high temperature low cycle fatigue fracture surfaces are given.
还介绍了发生过载损伤后高温低循环疲劳断口的特征。
Results of evaluations to date indicate that the number of cycle life attains standard target of 200 times, which reflect good high temperature performance.
结果表明，在常温充电-低温放电循环试验中，电池的循环寿命次数仍能达到200次的要求，证明了镉镍蓄电池良好的耐高温性能。
However, cracks initialized in the diffusion layer between substrate and bond coat when TBCs were tested with low cycle fatigue at high temperature.
而在高温低周疲劳条件下裂纹是在粘结层与高温合金基体的扩散层处。
Excellent extreme pressure, improve machine and parts of rust cycle, antirust period in more than 20 days, suitable for high temperature, humidity region.
具有极佳的极压性、提高机床和零件的防锈周期，加工的工件防锈期在20天以上，适用于高温、高湿地区使用。
Die from the back of high temperature water through the pipe back to mold temperature machine, the pump pressure delivered to the heater, the heating tube is sent to die, so the cycle.
从模具囬来的高温水经过管路囬到模温机，经泵浦加压后输送到加热器，通过电热管加热送至模具，如此循环。
The thermal fatigue resistance mainly depends on the high temperature yield strength and will become maximum, if the strength, plasticity and cycle thermal stability are in an adequate combination.
热疲劳抗力主要取决于材料的高温屈服强度，在强度、塑性及循环热稳定性取得适当配合时最大。
This paper presents a modification to the FMDF model for predicting high-temperature low-cycle fatigue life, which improves accuracy of the model and facilitates the application of it.
本文对预测高温低周疲劳寿命的FMDF公式作了改进，结果明显提高了精度，使其方便实用。
The styles of hybrid plant with different high temperature fuel cell are analyzed, and the commonly used topping cycle and bottoming cycle are presented.
文中还对微型燃气轮机与不同燃料电池组成混合装置的形式进行了分析，并给出了几种常见的典型循环。
The preparation method is simple in process, shortens preparation cycle greatly and features low temperature synthesis, high purity, even particles distribution and the like.
该法不仅工艺简单，大大缩短了制备周期，而且具有低温合成、高纯度、均一粒径分布等优 点。
The article discusses the key issues which factor into the conceptualization of the gas turbine cycle to be coupled to the 10mw high temperature gas cooled test reactor (HTR 10).
讨论了10MW高温气冷实验堆(HTR 10)气体透平总体方案设计中应考虑的主要因素。
The high temperature gas cooled reactor (HTGR) coupled with the gas turbine cycle is considered as one of the leading candidate concepts for future nuclear power deployment.
高温气冷堆气轮机循环被认为是将来核能发电领域中最有潜力的方案之一。
The cycle-reaction of the MAN-MAA-MAM copolymers at high temperature and the thermal-properties of polymethacrylimide(PMI) were investigated.
详细研究了所制备共聚物的高温环化反应，以及所生成的聚甲基丙烯酰亚胺（PMI）的耐热性能。
Then a simulation of cycle discharge performance was carried out by using the cycle life test data got at high-temperature. The error of discharge voltage was less than 0.6%.
然后结合已有的高温循环寿命测试数据对电池循环放电性能进行了仿真，得到了放电电压误差不超过0.6%的结果；
Then a simulation of cycle discharge performance was carried out by using the cycle life test data got at high-temperature. The error of discharge voltage was less than 0.6%.
然后结合已有的高温循环寿命测试数据对电池循环放电性能进行了仿真，得到了放电电压误差不超过0.6%的结果；
应用推荐