However, under high temperature combustion conditions, gas radiation is very important in the total heat transfer.
然而在高温燃烧环境下，气体辐射在总的热量传递中占有不可忽略的比重。
The high temperature combustion desulfurization possibility by fly ash remelting is study in vertical experiment cyclone furnace.
通过立式旋风炉实验台研究以飞灰重溶的方法解决高温燃烧固硫问题的可行性。
The high temperature combustion of the water by high-temperature catalytic oxidation, so that the organic compounds and inorganic carbonate were converted into carbon dioxide.
经高温燃烧管的水样受高温催化氧化，使在有机化合物和无机碳酸盐均转化为二氧化碳。
The thermal fatigue resistance high temperature combustion gases of eight heat resistant steels and superalloys in fatigue properties were studied on test rigs heated by combustion flue gas.
对选作高速柴油机预燃室喷咀材料的八种耐热钢及高温合金的燃气热疲劳性能进行了试验研究。
Regenerators, which recover waste heat and provide high temperature air, are key components of the regenerative high temperature air combustion system.
蓄热室是蓄热式高温空气燃烧系统实现余热回收和获得高温空气的关键部件。
By controlling combustion temperature or adding kaolin clay to make alkali metal salts into high melting substances, coking can be avoided in dense phase zone.
通过控制密相区燃烧温度或添加高岭土使之与碱金属钠盐形成高熔点物质，可避免密相区结焦。
Combustion at high temperature causes decomposition to nitrogen and water.
氨在高温下燃烧分解成为氮和水。
Simply put, the general building materials (such as wood, gypsum board to the metal ceiling) when subjected to high temperature or combustion will spread the fire and heat to other locations.
简单地说，一般建材(如木材、石膏板其至金属天花)当受到高温或燃烧后都会将火和热蔓延至其它位置。
In this paper, a practical technique to measure heat of combustion is given by way of applying high sensitive bridge temperature sensor linked microcomputer and automatic data acquisition system.
本文给出通过高灵敏度桥式温度传感器与微机联机，采用自动数据采集技术测定燃烧热的方法与实用技术。
The parameters such as POS concentration, POS heating temperature, fuel load and oxygen content have high influence on combustion efficiency.
石油焦渣油浆的浓度、油焦浆的加热温度、负荷和氧量对其燃烧效率有很大影响。
In wet combustion the sludge is processed at high temperature and under pressure.
污泥的湿烧是在高温和压力下进行的。
The fluidized bed is better than the grate furnace as a combustor since its diversity of fuel kinds, high efficiency of combustion and lower temperature of operation.
流化床燃烧方式和炉排炉燃烧相比具有燃料适应性广、燃烧效率高、运行温度低等优点。
The results show that in the high temperature zone of coal combustion and gasification elemental mercury is thermal stable form of Hg.
化学热力平衡分析结果表明，在煤燃烧和气化的最高温度区域里，单质汞是汞的主要形式；
A high and uniform temperature distribution along the outer surface of the combustion chamber is necessary to ensure a high radiation power density.
微燃烧室的外表面必须产生一个高而均匀的温度分布，以尽可能高地输出辐射能。
High temperature air combustion (HTAC) is a new combustion technology, which can save fuel, enhance the heat efficiency, decrease emission of NOX and reduce the size of equipment.
高温空气燃烧技术是一项新型的高效低污染燃烧技术，具有节约燃料、提高热应用率、降低NOX排放和减少设备尺寸的特点。
During the simulation of the dynamic properties of regenerative high temperature air combustion system in coupled case, an industrial heating furnace model is selected as the physics model.
在对耦合工况下蓄热式燃烧系统的动力特性分析中，以一个工业用蓄热式加热炉为参考计算模型。
The combustion synthesizing(self-propagating high temperature synthesizing) is one of the active techniques for surface modification.
燃烧合成涂层技术是一种新兴的表面改性和表面涂层技术。
The high blast temperature technology by top combustion preheating furnace preheating the intensifying combusted air is used for the hot stoves of New no. 2 and no. 3 BFs in Angang.
鞍钢新2号、新3号高炉热风炉应用了顶燃式预热炉来预热助燃空气的高风温技术。
A high precision, high antijamming multipoint infrared telemetry system was developed to measure the piston temperature in internal combustion engine.
设计一种高精度、高抗干扰的内燃机活塞温度多路红外遥测系统。
Applying high velocity burners and pulse combustion control system, it is possible to get accurate temperature control and even distribution of temperature of furnaces.
选用高速烧嘴及脉冲燃烧技术可以使热处理炉获得较精确的温度控制及较高的炉温均匀性。
With high temperature characteristics, ceramics can be used as inner-liner in multi-channel coal burner to improve combustion efficiency.
陶瓷具有耐高温的特性，多作为内衬应用在多通道煤粉燃烧器上来提高煤燃烧效率。
A new concept of achieving high temperature air by circulating fluidized bed combustion at high excess air ratio was proposed.
提出了借助循环流化床在高过剩空气系数下燃烧的技术提供高温空气的新构思。
Electric arcs in combustible gas mixtures, as a high temperature source in combustion and plasma technology, have a great deal of advantages in comparison with those in noble gases.
以燃料和空气混合物为工质的燃烧反应性电弧等离子体在燃烧技术和等离子体技术中都有广泛的应用前景。
Research shows that the burner is based on high-temperature air combustion, zoned combustion and exhaust gas recycle.
该烧嘴综合高风温无焰燃烧、分区燃烧及烟气再循环等技术；
The gas in the combustion chamber and the tube inlet reaches a high temperature level.
燃烧室和身管入口附近区域处于同一高温水平，相应区域的壁面热负荷较大。
The kinetic high-temperature reaction process in the combustion front was analyzed through quenching of combustion front.
结合燃烧前沿激冷淬熄法，分析了其燃烧前沿高温动态反应过程。
The common requirements for catalyst materials in methane combustion and automotive exhaust purification are higher low-temperature activity and high-temperature stability.
催化燃烧与汽车尾气净化反应对催化剂的共同要求是具有良好的低温活性和高温热稳定性。
Based on the detail about the Characteristics of regenerative combustion, by the coal of the high temperature gasifying furnace, the regenerative reheating furnace is designed.
本文在详细分析蓄热式燃烧技术的基础上，利用高温气化炉产生的煤气，对蓄热式高温炉进行了设计。
The shape of rich soot combustion area at high temperature coincides with the share of spray area before ignition.
速燃期内高温富碳燃烧区的形状与着火前一时刻喷雾场的形状相吻合；
Using numerical simulation software, the paper analysis the influence of secondary air to the pollutant discharged in high temperature and low oxygen air combustion.
利用数值模拟软件分析了二次空气对高温低氧空气燃烧污染物排放的影响。
应用推荐