The coating has high hardness and excellent wear resistance.
涂层具有较高的硬度和较好的耐磨性。
The coating shows quick drying property, high hardness and excellent comprehensive performances. The application prospect thereof is wonderful.
该水性氨酯油干性快、 硬度高、综合性能优异,应用前景广阔。
ADI can realize the performance of both high hardness and toughness, satisfying the requirements of wear-resistant parts under impact condition.
奥贝球铁能够实现高硬度的同时具有较高的韧性,适用于一定冲击条件下耐磨零件的工作要求。
The utility model has the advantages of a simple structure, material saving, low cost, high hardness, strong toughness and obvious prolonged life span.
本实用新型具有结构简单、节省材料和成本低廉的优点,它不仅硬度高,而且韧性强,显著延长了使用寿命。
The ceramic-metal composite materials have the advantages of high hardness, strength, toughness and low density, and are widely used in bulletproof field.
陶瓷-金属复合材料具备高硬度、高强度、高韧性以及低密度的优点,已被广泛应用于防弹领域。
Fine grain grade with high hardness and high toughness.
具有高硬度和高韧性,晶粒度为细级别的牌号。
It has good characters of good toughness and high hardness.
具有较好的韧性和较高的硬度。
Meanwhile, the layer still has high hardness and low brittleness.
与此同时,渗层仍保持了较高的硬度和低的脆性。
In addition, it is highly crack sensitive because of the high hardness.
另外,由于高的硬度使之具有高的裂纹敏感性。
PCD material is characterized by high hardness, wear resistance and high cost.
PCD材料具有高硬度、高耐磨性以及刀具刃磨成本较高等特点。
There is a narrow transitional zone from high hardness to low hardness on the interface.
在界面存在一个从高硬度到低硬度的渐变过渡区。
Roll the Cr12 material, processed by the vacuum quenching, high hardness, good wear resistance.
轧辊采用Cr12的材质,经真空淬火加工而成,硬度高,耐磨性好。
Compared with brush plating Ni, brush plating Fe has more advantages as low cost and high hardness.
刷镀铁与刷镀镍相比具有成本低、硬度高的优点。
The aim is to provide a reference for solving the high hardness problem of the shallow groundwater.
目的在于为改善洛阳市浅层地下水质,解决水质硬化问题提供一个参考依据。
The homemade wear-resistant cast steel has high hardness and high tendency of hardenability after welding.
自制抗磨铸钢硬度高、焊后淬硬倾向严重。
Electron gun accessories of color kinescope are made of stainless steel which has high hardness and intensity.
彩色显象管电子枪零件一般由不锈钢材料制成,具有较高的硬度和强度。
Lining board, mixing blades adopts high hardness and high toughness wear-resistant steel and long service life.
衬板、搅拌叶片均采用高硬度、高韧性的耐磨合金铸钢,使用寿命长。
But the optical surfacing on SiC mirrors is extremely difficult because of its high hardness and elastic modulus.
但是,由于碳化硅材料所具有高硬度、高弹性模量等性质,使碳化硅质反射镜的光学加工难度很大。
A type of metal powder-cored wire with high hardness, wear-resistance and high toughness is studied in this paper.
本文研究了一种高硬度高韧性耐磨埋弧堆焊用金属粉型药芯焊丝。
It is imperative to explore the surfacing material with ultra-high hardness, wear-resistance and crack-resistance.
冷轧工作辊的堆焊修复是冶金行业的重大课题,要求堆敷金属具有超高硬度、高抗裂性及高强韧性。
The exceptional tool performance of sintered carbides results from their very high hardness and high compressive strength.
硬质合金材料的出色之处来源于它们非常高的硬度和耐压强度。
At high hardness, therefore, the relationship between Brinell and Vickers or Rockwell scales is affected by the type of ball used.
因此,对于高硬度,布氏硬度计和维氏硬度计或洛氏硬度计的检测值之间的关系就会受到所采用的球体的影响。
The working for square pockets of turning steel cages having high hardness and difficult to broach is conducted in linear cutting.
方形兜孔钢保持架因为钢架硬度高、拉削难度大等特点,始终采用线切割加工方兜孔。
Ebonite is one kind of special rubber product with high strength, high modulus, high hardness and fine unnotched impact resistance.
硬质橡胶是一种具有高强度、高硬度、高模量以及良好无缺口抗冲击强度的特种橡胶制品。
We have developed a new process for building up thick and stable amorphous carbon films with high hardness and low internal stress.
本文研究了一种制备高硬度、低内应力、厚度高且热稳定性良好的非晶碳薄膜的方法。
The appreciable increase in the life of cold working dies can be attributed to the high hardness and coherence resistance of coatings.
冷模具寿命的提高归功于刷镀层的高硬度和良好的抗粘着性能。
The appreciable increase of the life for cold working dies is attributed to the high hardness and adhesion resistance of the coatings.
冷模具寿命的提高归功于刷镀层的高硬度和良好的抗粘着性能。
The results showed that modified alkyd resin paints possess good properties such as fast drying, high hardness and excellent water resistance.
结果表明,苯乙烯改性桐油基醇酸树脂涂膜具有快干、高硬度和耐水性好等优点。
The quenching layer with high hardness on the surface of number control machine-tools axle was obtained using laser surface treatment technology.
采用激光表面处理工艺,对数控机床主轴主要表面进行快速激光扫描,可获得高硬度的淬火硬化层。
The quenching layer with high hardness on the surface of number control machine-tools axle was obtained using laser surface treatment technology.
采用激光表面处理工艺,对数控机床主轴主要表面进行快速激光扫描,可获得高硬度的淬火硬化层。
应用推荐