However, in case the content of EP copolymer was controlled at not higher than 10%, then the PP alloy would possess not only the high impact strength but also the flexural module.
若控制合金中乙丙共聚物的含量不超过10%，则可使PP合金材料既具有较高的冲击强度又具有较高的模量。
A simple, selective chelatometric titration method to determine the high content of tin in tin bearing alloy and ore sample is proposed.
提出测定含锡合金和矿样中高含量锡的一种简易、选择性螯合滴定法。
An aluminum silicon die cast alloy having a very low iron content and relatively high strontium content that prevents soldering to dies into die casting process.
一种铝硅模铸合金，具有非常低的铁含量和相对较高的锶含量，用来防止在模铸过程中焊接在模具上。
The chemical compositions of new cast alloy steel with high si content was designed, its microstructure and corrosion behavior were studied.
设计了一种含硅量较高的新型铸造合金钢，并研究了该合金钢的显微组织及其腐蚀行为。
The results show that the wear resistance can be improved by using fine particle, even and high content of V in the alloy.
研究结果表明：合金中V颗粒细小且弥散均匀以及提高V的含量，有利于提高合金材料的耐磨损性能；
The Mg-based block amorphous alloy has the advantages of high amorphous formation ability, high Mg content, high strength, good corrosion resistance, and the like.
本发明的镁基块体非晶合金具有高非晶形成能力，镁含量高，强度高，耐腐蚀性能好等优点。
Determination of titanium content in tin and titanium alloy was studied using the whole spectrum direct-reading high-resolution inductively coupled plasma atomic emission spectrometer(ICP-AES).
提出了电感耦合等离子体发射光谱仪（ICP-AES）测定锡钛合金中钛含量的分析方法。
The application of nitrous oxide ethyne flame atomic absorbing spectral method to continuous measure the content of Nb and Mo in 7715D high temperature titanium alloy is studied.
研究与运用氧化亚氮-乙炔火焰原子吸收光谱法连续测定7715D高温钛合金中的铌钼含量。
Then Ni-Mn alloy electroformation tests are carried out for the model of a nozzle. The high thickness distribution uniformity and Mn content of the electroformed layers are obtained.
对某喷管模拟件进行了镍锰合金的电铸试验，得到了较均匀的电铸层厚度及锰含量分布。
In order to develop the high plastic wrought magnesium alloy, the paper studied the Superiority of adding rare earth element Y of Mg-Zn-Zr magnesium alloy with low Zn content.
为开发高塑性的变形镁合金，本文对低锌含量镁锌锆系合金中添加Y后的若干特性和优势展开了研究。
The on-line testing of hydrogen content in the molten aluminum alloy is very important for producing aluminum alloy castings of high quality.
液态铝合金含氢量现场检测对于生产高质量铝合金铸件及铸锭具有非常重要的意义。
Aimming at this situation, it introduces applying hammers of alloy steel with high carbon and manganese content and low alloy steel and composite hammers.
针对这一情况，提出了采用高碳锰合金钢锤头、低合金钢锤头及复合锤头。
The zinc alloy with 48% Al content has the best wear resistance under high speed and heavy load conditions.
在高速重载条件下，含铝量为48％的高铝锌基合金的耐磨性最佳。
In addition, the content increase of Nd in the alloy resulted in high over-potential, which leaded to the higher polarization.
此外，随着合金中钕含量的增加，电极的过电位逐渐升高，说明钕元素的加入增加了电极极化。
The optimum conditions of sample digestion and ICP-AES operation were discussed. This method has been applied to the determination of high content silicon in aluminium alloy with satisfactory results.
详细考察了高硅铝合金的微波消解和ICP - AES测定条件，经对数个实际样品的检测，方法的分析指标和测试精密度满意。
The process has the features of low reaction temperature, short reaction period, low cost, etc, and the prepared vanadium nitride alloy with high nitrogen content is suitable for use in steel making.
本发明具有反应温度低、反应时间短、工艺简单、生产成本低等特点，更适合于工业上大批量生产，本发明制备的氮化钒合金含氮量高，更适合于钢铁工业炼钢要求。
Applications in the chemical industry in the high molybdenum content of cobalt-based alloy, its ability to engage in intergranular corrosion. Good for alloy B-2-type alloy.
在化学工业中应用的高钼含量的钴基合金，其具有搞晶间腐蚀能力。很好的适用于Alloy B - 2类合金。
Applications in the chemical industry in the high molybdenum content of cobalt-based alloy, its ability to engage in intergranular corrosion. Good for alloy B-2-type alloy.
在化学工业中应用的高钼含量的钴基合金，其具有搞晶间腐蚀能力。很好的适用于Alloy B - 2类合金。
应用推荐