Up to now, the welding theory for high carbon alloy steel has not been well established.
迄今为止，高碳合金钢材料的焊接理论仍未完善。
The high strength and high toughness hardfacing covered electrode to the medium-high carbon alloy steel surface' repair was put forward in this paper.
本文针对焊缝熔敷金属在高强时，容易开裂问题展开研究，研制了中、高碳合金钢工件表面修复的高强、高韧新型堆焊焊条。
The quality of resistance spot welding of low carbon steel and high strength low alloy steel is studied by looking into the dynamic voltage characteristics of the electrodes.
本文通过对电阻点焊电极电压动态特性的分析，研究了低碳钢及低合金高强度钢电阻点焊的质量问题。
Applicable to high tensile strength metal grinding, such as general carbon steel, alloy steel, malleable iron hard bronze.
适用于中高抗张强度金属材料的磨削，如一般碳素钢，合金钢，可锻铸铁，硬青铜等。
There are four broad classifications of steel: carbon steels, alloy steels, high-strength low-alloy steels and stainless steels.
钢材大致可分为四类：炭素钢，合金钢，高强度低合金钢和不锈钢。
It is indicated by analysis that the main causes of difficulty of drawing high strength thick galvanized steel wire are thicker ZnFe alloy coat and higher carbon and manganese contents.
分析大直径高强度镀锌钢丝拉拔困难的主要原因在于锌-铁合金层较厚、钢丝中碳含量和锰含量较高。
The effect of silicon and isothermal quenching process on the microstructure and mechanical property of the high-carbon low alloy martensite-Bainite steel was studied.
研究了硅和等温淬火工艺对高碳低合金马氏体-贝氏体钢金相组织与机械性能的影响。
Aimming at this situation, it introduces applying hammers of alloy steel with high carbon and manganese content and low alloy steel and composite hammers.
针对这一情况，提出了采用高碳锰合金钢锤头、低合金钢锤头及复合锤头。
Uses: additives for high temperature alloy stainless steel wire with and carbon steel bars and additives used.
用途：供高温合金添加剂用及不锈钢电焊条和炭素合金钢添加剂用。
By using solidification and melted slag theory, series mold powders of low alloy steel, plain carbon steel and high carbon steel, were developed and used in production successfully.
运用凝固理论和熔渣理论，研制开发了适用于低合金钢、普碳钢、高碳钢的系列保护渣并成功地应用于连铸生产。
High carbon high speed steel (HSS) is a new material replacing common wear resistant alloy. Quenched high speed steel roll sleeve has high hardness and poor workability.
高碳高速钢是取代普通耐磨合金制造轧辊的新材质，淬火高速钢辊套硬度高，内孔加工性能差。
Wear loss of specimens for these two steels during a certain time show that low carbon high alloy steel is much more resistant to corrosive impact abrasion than high manganese steel.
比较两种材料试样在一定时间内的失重变化情况，表明低碳高合金钢的抗冲击腐蚀磨损性能优于高锰钢。
The results show that the resistance of low carbon high alloy steel is better than that of the high manganese steel under the same test condition.
结果表明，在相同试验条件下低碳高合金钢的冲击腐蚀磨损性能要优于高锰钢的。
Wwlding material: low carbon steel, high strength steel, medium carbon steel, low alloy steel.
可焊接材料：低碳钢、强度钢、碳钢、合金钢。
The research, has improved grinding technology of high-carbon alloy steel slender axis, and the phenomena of exiguous flaws were overcomed.
在研究的基础上改进了高碳合金钢细长轴的磨削工艺，克服了表面烧伤现象。
The mill Liners of high-carbon medium-chromium alloy steel have ideal coordination of toughness and hardness after optimum heat treatment determined by cross-design.
本文介绍采用高碳中铬合金钢作为磨机衬板材料，按照正交设计法优选热处理工艺参数，得到材料韧性和硬度的理想配合。
Production steel grade: carbon structure steel, low alloy high intensity structure steel, steel for bridge, weathering steel, etc.
生产钢种：碳素结构钢、低合金高强度结构钢、桥梁用钢、耐候钢等。
High quality carbon steel, low alloy steel and alloy steel seamless pipes for high pressure fertilizer equipment and pipeline.
用于高压化肥设备和管道用优质碳素钢、低合金钢和合金钢无缝钢管。
Wwlding material:low carbon steel, high strength steel, medium carbon steel, low alloy steel.
可焊接材料：低碳钢、高强度钢、中碳钢、低合金钢。
The results show that as-annealed microstructure and as-quenched-tempered microstructure of the low carbon high alloy steel added nickel are both single-phase lath martensite.
结果表明：加镍低碳高合金钢无论退火态还是淬火回火态，其组织均为单相板条马氏体；
It can be adopted for the grinding of the hard and strong bending strength materials such as chilled steel, alloy steel, high-speed and high carbon steel.
适合加工淬火钢，合金钢，高速钢，高碳钢等硬度较硬，抗张强度较大的材料。
A new filtration technique for purification of carbon, stainless, high speed, low and high alloy steel castings in investment casting was investigated.
研究了在熔模精密铸造中过滤净化碳钢、低合金钢和高合金钢等铸钢件的过滤新技术。
Low alloy cold die steel belongs to high carbon steel, so the quenching crack is easy to appear when it is hardened.
低合金冷作模具钢多属于高碳钢，淬火中易出现淬火裂纹。
Materials for the carbon steel and low alloy wire, so that the coating has high wear resistance, and lower prices.
材料为碳钢及低合金丝材，使涂层有较高的耐磨性，且价格较低。
There are four broad classifications of steel : carbon steels, alloy steels, high-strength low-alloy steels and stainless steels.
钢材大致辞可分为四类，即：碳素钢、合金钢、高强度低合金钢和不锈钢。
It is made of high quality low-carbon steel, and rolled copper alloy as its surface.
以优质的低碳钢为基体，表面烧结锡青铜合金，经过多次烧结轧制而成。
It is made of high quality low-carbon steel, and rolled copper alloy as its surface.
以优质的低碳钢为基体，表面烧结锡青铜合金，经过多次烧结轧制而成。
应用推荐