A. Surface of Stainless steel and high alloy steels; Not painted.
不锈钢及高合金钢的表面不需刷漆。
In case of high alloy steel or nonferrous materials, liquid penetrate method can be substituted.
在使用高合金钢或无铁材料时，可用渗透探伤进行检测。
A study on the redistribution of alloying elements in the high alloy steel during boriding has been made.
用辉光放电发射光谱分析技术，研究了不同合金钢中六种合金元素在渗硼层中重新分布的规律。
The results show that the resistance of low carbon high alloy steel is better than that of the high manganese steel under the same test condition.
结果表明，在相同试验条件下低碳高合金钢的冲击腐蚀磨损性能要优于高锰钢的。
A new filtration technique for purification of carbon, stainless, high speed, low and high alloy steel castings in investment casting was investigated.
研究了在熔模精密铸造中过滤净化碳钢、低合金钢和高合金钢等铸钢件的过滤新技术。
The results show that as-annealed microstructure and as-quenched-tempered microstructure of the low carbon high alloy steel added nickel are both single-phase lath martensite.
结果表明：加镍低碳高合金钢无论退火态还是淬火回火态，其组织均为单相板条马氏体；
Wear loss of specimens for these two steels during a certain time show that low carbon high alloy steel is much more resistant to corrosive impact abrasion than high manganese steel.
比较两种材料试样在一定时间内的失重变化情况，表明低碳高合金钢的抗冲击腐蚀磨损性能优于高锰钢。
About half of all aluminium castings are made using high-pressure die-casting (HPDC), in which a molten aluminium alloy is injected under pressure into a steel mould, or die.
大约有一半的铸铝工艺是高压模铸(HPDC)，在这种工艺中，通过压力将液态铝合金注入钢模，或模具。
The quality of resistance spot welding of low carbon steel and high strength low alloy steel is studied by looking into the dynamic voltage characteristics of the electrodes.
本文通过对电阻点焊电极电压动态特性的分析，研究了低碳钢及低合金高强度钢电阻点焊的质量问题。
And if the purple red: nonmagnetic as high manganese steel, magnetic usually usually steel or low-alloy steel.
而假如变紫红色：无磁性的为高锰钢，有磁性的通常为通常钢或低合金钢。
Atlas, strap material of common plastic, copper, stainless steel, tungsten titanium alloy, high-tech ceramics, metal, etc.
表壳、表带的材料常见的有塑料、铜、不锈钢、钨钛合金、高科技陶瓷、金等。
Specializing in high-grade copper floor drain, floor drain fine stainless steel, zinc alloy floor drain, basin water control, triangle valve production and sales.
专业从事高档铜地漏、精品不锈钢地漏、锌合金地漏、面盆下水器、三角阀系列产品生产与销售。
These are graphite, high silicon cast iron, lead silver alloy, platinum, and even scrap steel rails.
所用材料有石墨、高硅铸铁、铅银合金、铂、甚至废钢轨等。
The use of high-strength alloy steel parts is economical because it reduces weight, thereby allowing for more efficient aerodynamic surfaces and providing the potential for increased payload and fuel.
高强度合金钢有重量轻的优势，使用高强度合金钢就比较经济实惠，从而赢得更有效的气动表面并有望增加承载能力和燃油储量。
Applicable to high tensile strength metal grinding, such as general carbon steel, alloy steel, malleable iron hard bronze.
适用于中高抗张强度金属材料的磨削，如一般碳素钢，合金钢，可锻铸铁，硬青铜等。
Our products: Various gray iron, ductile iron, common cast steel, low-alloy steel, high manganese steel, etc various parts of architectural and mechanical engineering.
本公司主要生产各种灰铁件、球铁件、铸钢件、高猛钢件等各种建筑、工程机械用零部件。
There are four broad classifications of steel: carbon steels, alloy steels, high-strength low-alloy steels and stainless steels.
钢材大致可分为四类：炭素钢，合金钢，高强度低合金钢和不锈钢。
For welding low-alloy and high strength steel with corresponding strength grade.
用于相同强度等级的低合金高强钢的焊接。
The influence of rare earth, titanium and nitrogen on the structures and properties of high boron alloy steel was researched.
研究了稀土-钛-氮复合变质处理对高硼合金钢组织和性能的影响。
The chemical compositions of new cast alloy steel with high si content was designed, its microstructure and corrosion behavior were studied.
设计了一种含硅量较高的新型铸造合金钢，并研究了该合金钢的显微组织及其腐蚀行为。
To meet the development of steels used for the large engineering machinery, fatigue crack growth rates of a high strength low alloy steel HG80 and welded joint were investigated.
为适应大型工程机械焊接用钢需要，对低合金高强度钢HG80及其焊接接头的疲劳裂纹扩展速率进行了研究。
Aluminum alloy steel frame design, high strength, light weight.
铝合金钢架计划，强度高、分量轻。
The precipitation behaviors of titanium in high strength low alloy steel(HSLA steel) were summarized including the type, morphology, size and precipitation kinetics of the precipitates.
总结了钛在低合金高强钢中的析出行为，包括析出物的种类、形态、尺寸及析出动力学；
The flat die steel production line product; main product: high alloy flat die steel rolling program and pass design at Fushun Special Steel Co.
介绍了抚顺特殊钢有限公司模具扁钢生产线生产工艺；主导产品：高台金模具扁钢轧制程序设计及孔型设计。
Uses: additives for high temperature alloy stainless steel wire with and carbon steel bars and additives used.
用途：供高温合金添加剂用及不锈钢电焊条和炭素合金钢添加剂用。
When properly maintained and overhauled, high-strength alloy steel components demonstrate high levels of service reliability.
只要维修和大修得当，高强度合金钢部件就会表现出极高的可靠性。
When properly maintained and overhauled, high-strength alloy steel components demonstrate high levels of service reliability.
只要维修和大修得当，高强度合金钢部件就会表现出极高的可靠性。
应用推荐