A. Surface of Stainless steel and high alloy steels; Not painted.
不锈钢及高合金钢的表面不需刷漆。
Notes: 1. Generally no corrosion allowance is added for high alloy and nonferrous internals.
注：1、对于高合金及非铁内件通常不加腐蚀余度。
Lye for the use of high-temperature titanium and titanium alloy or high alloy stainless steel.
对于高温碱液多采用钛及钛合金或者高合金不锈钢。
In case of high alloy steel or nonferrous materials, liquid penetrate method can be substituted.
在使用高合金钢或无铁材料时，可用渗透探伤进行检测。
A study on the redistribution of alloying elements in the high alloy steel during boriding has been made.
用辉光放电发射光谱分析技术，研究了不同合金钢中六种合金元素在渗硼层中重新分布的规律。
The effect of heating temperature on abrasion resistance of high alloy wear-resistant cast iron was studied.
研究了加热温度对高合金耐磨铸铁耐磨性的影响。
The effect of heating temperature on abrasion resistance of high alloy wear-resistant cast iron was studied.
采用金相、扫描电镜和力学性能分析方法研究了加热温度对含稀土低合金耐磨铸铁冲击韧性的影响。
The tapered plug is precision ground from hardened high alloy material or an overlaid stainless to assure a tight seal and easy operation.
锥形阀塞经过精密研磨，采用硬化高合金材料或一种镀层不锈钢，确保紧密密封和操作容易。
The flat die steel production line product; main product: high alloy flat die steel rolling program and pass design at Fushun Special Steel Co.
介绍了抚顺特殊钢有限公司模具扁钢生产线生产工艺；主导产品：高台金模具扁钢轧制程序设计及孔型设计。
The results show that the resistance of low carbon high alloy steel is better than that of the high manganese steel under the same test condition.
结果表明，在相同试验条件下低碳高合金钢的冲击腐蚀磨损性能要优于高锰钢的。
A new filtration technique for purification of carbon, stainless, high speed, low and high alloy steel castings in investment casting was investigated.
研究了在熔模精密铸造中过滤净化碳钢、低合金钢和高合金钢等铸钢件的过滤新技术。
Suitable for a wide range of low and high alloy steels, titanium alloys, austenitic stainless steels, heat resistant alloys, fibre glass reinforced plastics etc.
适合于低合金钢、高合金钢、钛合金、奥氏体不锈钢、耐热合金、玻璃纤维强化塑料等。
The Influence of the quenching and tempering treatment and the different subcritical treatment on microstrcture and property of a high alloy white cast iron was studied.
研究表明，通过亚临界热处理可以使含有大量残留奥氏体的高铬铸铁产生二次硬化，从而提高高铬铸铁的硬度和耐磨性。
The gross section fine grain material can be obtained by radial forging. One heat forging from ingot to finished products of high alloy with hard deformation can be realized.
径向锻造可获得全截面细晶材料，并实现高合金难变形材料由锭到材的一火次锻造。
The results show that as-annealed microstructure and as-quenched-tempered microstructure of the low carbon high alloy steel added nickel are both single-phase lath martensite.
结果表明：加镍低碳高合金钢无论退火态还是淬火回火态，其组织均为单相板条马氏体；
Weldability of high alloy tool steels is analyzed, the application of fusion welding, brazing and solid-state welding in the welding of high alloy tool steels had been summarized.
高合金工具钢的焊接性能较差，但高合金工具钢的焊接在工业上有较广泛的应用。
In the cross piercing process, as the piercing precession power can not overcome the resistance force, it will lead to rear-jamming when rolling thick-wall tubes or high alloy tubes.
在斜轧穿孔过程中，由于轧件旋进力克服不了顶头的阻力，因此轧制厚壁管或高合金钢管时在穿孔后期造成后轧卡。
Wear loss of specimens for these two steels during a certain time show that low carbon high alloy steel is much more resistant to corrosive impact abrasion than high manganese steel.
比较两种材料试样在一定时间内的失重变化情况，表明低碳高合金钢的抗冲击腐蚀磨损性能优于高锰钢。
Based on the ordinary high chromium cast iron foundation, designed one kind of high alloy abrasion-resisting cast iron material which is used to make the lining iron of the screw grader.
在普通高铬铸铁的基础上，研制了一种用于制造螺旋分级机小叶片的高合金耐磨铸铁材料。
The effect of heat treatment on structure and hardness of high alloy iron based hardfacing layer metal was studied and the result obtained is of guiding significance for it's application.
研究了热处理对高合金铁基堆焊层组织和硬度的影响，所得结果对其应用有一定的指导意义。
Where backing welds are radiographed for their full length to meet code requirements before clad side high alloy welding is done, this requirement may be omitted with prior approval of the Purchaser.
在复合侧高合金焊接之前，如果要对打底焊道在全长上进行射线检测，则事先经买方同意后可忽略此项要求。
For high strength and durability, what you really want is a metal alloy of some kind.
如果旨在高强度和持久性，金属合金是您的不二选择。
About half of all aluminium castings are made using high-pressure die-casting (HPDC), in which a molten aluminium alloy is injected under pressure into a steel mould, or die.
大约有一半的铸铝工艺是高压模铸(HPDC)，在这种工艺中，通过压力将液态铝合金注入钢模，或模具。
The investment casting method another advantage is that it can casting various alloy castings, especially the complex of high temperature alloy castings can be casting.
熔模铸造方法的另一优点是，它可以铸造各种合金的复杂的铸件，特别可以铸造高温合金铸件。
The new high-strength aluminum alloy structure, effectively prevent the deformation and maintain the surface brightness.
全新高强度铝合金金属结构，有效防止变形及保持表面亮度。
Atlas, strap material of common plastic, copper, stainless steel, tungsten titanium alloy, high-tech ceramics, metal, etc.
表壳、表带的材料常见的有塑料、铜、不锈钢、钨钛合金、高科技陶瓷、金等。
Atlas, strap material of common plastic, copper, stainless steel, tungsten titanium alloy, high-tech ceramics, metal, etc.
表壳、表带的材料常见的有塑料、铜、不锈钢、钨钛合金、高科技陶瓷、金等。
应用推荐