Heaters in the G-Series and M-Series product lines use a high-temperature material for their surface face.
系列和M系列产品线中的加热器使用高温材料作为加热器表面。
If the material also has high strength at elevated temperatures, the wall thickness can be reduced, which, in turn, further reduces the wall temperature.
如果物质也有高强度在高温下，壁厚可减少，这反过来又进一步降低了管壁温度。
Application environment: because of the special surface treatment, the material can be used in strong corrosive environment. In -60 degree or 150 degree of normal work under high temperature.
适用环境：由于选用材料经过特殊的表面处理，可在强腐蚀环境下正常工作。在- 60度严寒或150度高温下正常工作。
Considering the high temperature of welder, never place any material on the welder so as to avoid fire.
鉴于机器温度很高，不要放置任何材料在机器上，以避免引发火灾。
One of the best efficient sealing material under high temperature and high pressure.
耐高温、高压是解决高温、高压密封问题的最有效的产品之一。
Rock wool carpet is insulation and other natural basalt ore, etc as the main raw material, by high temperature melting into fine, join the amount of processing from the binder.
岩棉保温毡是以玄武岩及其它天然矿石等为主要原料，经高温熔融成纤，加入适量粘结剂加工而成的。
Precise dc low resistance box is formed by material of low temperature coefficient high power resistance and high stability.
型精密大电流低阻箱采用温度系数低、电阻率大、稳定性高的材料精制而成。
Precise DC low resistance Box is formed by material of low temperature coefficient, high power resistance and high stability.
型精密大电流低阻箱采用温度系数低、电阻率大、稳定性高的材料精制而成。
Composite silicate insulation material plasticity, low thermal conductivity, high temperature resistant, low pulp drying shrinkage rate, etc.
复合硅酸盐保温材料可塑性强、导热系数低、耐高温、浆料干燥收缩率小等特点。
What material can resist such a high temperature?
什么材料能耐这样的高温。
The electromagnet coil former was analyzed by means of metallurgical microscope. The results shows that cracks results from excessive high temperature while casting and material embrittlement.
用金相显微镜对衔铁线圈骨架的裂纹进行分析。结果表明，由于锻造加热温度偏高，材料脆化导致裂纹形成。
The wear of friction wafers in main clutch features uneven radical distribution. In the operation of friction wafers, high local temperature and material softening are important reasons causing wear.
分析了主离合器摩擦片的磨损具有沿径向非均分布的特点，指出摩擦片在使用过程中，局部高温和材料软化是产生磨损的重要原因。
The only way of enlarging the applicable area is to study and produce new cooling material of constant temperature with high quality coefficient.
扩大应用范围的唯一途径是研究新型高优质系数的常温致冷材料。
The effect of high silicon low iron material on softening temperature, balling index, quality and output of sintering ore was investigated.
分析了高硅低铁物料对铅锌矿软化温度、成球性指数、烧结矿质量与产量的影响。
The optical methods and apparatus for high temperature mechanical behavior measurements of composite material are developed.
本文研究应用光学方法测量在高温下复合材料力学性能的方法和装置。
The pusher kiln is widely used to heat the electronic material with high temperature as a sintering device.
推板窑作为热工烧结设备，广泛应用于电子材料高温处理。
The resistance furnace can be heated to very high temperatures, the supplies graphitizing furnace carbon materials, for example, can put the material heated to a temperature of more than 2500.
这种电阻炉可以把物料加热到很高的温度，例如碳素材料石墨化电炉，能把物料加热到超过2500。
The theory and feasibility is analyzed, for measuring Linear Expansion Coefficient of high temperature material by moiré interferometry.
分析了激光云纹干涉法测量高温材料热膨胀系数的原理和可行性。
Jacket with a high temperature material which assures mechanical stability and very close tolerance.
夹克高温材料，保证机械稳定性和非常密切的宽容。
The high temperature creep deformation of certain material used in aerial engines lamina was detected by means of high temperature moire interferometry in this paper.
利用高温云纹干涉法对航空发动机叶片定向结晶材料的高温蠕变进行了测试，获得该材料不同主方向的高温蠕变性质和规律。
Tobacco leaves are high moisture material, and keep a certain moisture and temperature under certain environment and moisture.
烟叶是一种吸湿性强的物料，在一定温湿度环境下烟叶保持一定的温度和含水率。
The sources of benzopyrene in vegetable oil mainly include: raw material pollution, high temperature leaching and high temperature roasting.
植物油中苯并芘的来源主要包括：原料污染、高温浸出和高温焙炒。
The tiles are backed by a high-temperature-resistant material on the nose and leading edges of the wings.
这些面砖敷贴在用耐高温材料制成的机头和机翼前缘。
It is an effective measure to produce high-belite cementitious material by burning gold mine tailings and limestone at high temperature after milling.
利用黄金尾矿和石灰石，通过配料、粉磨、高温煅烧制备出富含高贝利特相矿物的胶凝材料，实现黄金尾矿的资源化。
It requires that the refractory material has good function of high temperature as well as good conductivity.
它要求耐火材料自身除具有良好的高温功能外，还要具有良好的导电功能。
This material can not withstand strong stresses, neither can it bear high temperature.
这种材料不能承受大的应力，也不能耐高温。
By analytical testing the material discovered that it has high temperature temper embrittlement.
经过对材料的分析试验，发现其具有高温回火脆性。
Raw material with high purity, suitable for high temperature, structure densified&uniform, inoxidizable.
原料纯度高，使用温度高，结构致密、均匀，抗氧化。
The mass loss of ablative material caused by physical, chemical and mechanical factors under high temperature affects properties of the material.
烧蚀材料在高温环境中因物理、化学和力学因素造成质量损失，影响其性能。
Some properties demonstrated that BSTS polar glass-ceramics is a promising material in the high temperature applications and can be used as an alternative substrate of SAW devices.
部分性能的测试表明BSTS极性微晶玻璃在高温区应用方面很有前途，并且是一种比较有前途的SAW基片替代材料。
应用推荐