Heating speed, every 10 seconds will complete a stator heating;
加热速度快，每10秒以内可完成一个定子加热；
2 the heating speed, the experimental process control parameters, including PID parameters.
升温速度，实验过程控制参数，含pid参数。
The thermoluminescence peak moves to the high temperature when the heating speed increasing.
在实验升温速率增大情况下，该峰值将向高温区移动。
The electric oven of the unity model has the advantages of high heating speed and high heat efficiency.
本实用新型的电烤箱加热速度快，且热效 率高。
If there are still a lot of steam after 350 degrees heat preservation, should still slow heating speed.
如在350度保温后仍有大量蒸汽冒出，仍应减缓升温速度。
The insulative material of fire retardant cable is studied by thermogravimetric analysis technology in different heating speed.
利用热分析技术对阻燃电缆绝缘材料在不同升温速率下的热解行为进行了实验研究。
It uses heat-gathering to heat, the heated liquid is involved in evenstrong heat radiation, Heating speed is very suiftcan save energy.
本机采用了集热式加热法，被加热溶液完全处于均匀强烈的热辐射中，加热速度快，节省能源。
The heating system is equipped with especial air-pipe. In addition quick heating speed, the power could be saved on account of energy recycle.
加热系统采用特殊风管设计，加热快速、热能回收，节省电力。
The heating system is equipped with especial air-pipe. In addition quick heating speed, the power could be saved on account of energy recycle.
加热系统采用特殊风管设计，加热恰、热能回收、节省电力。
It uses heat-gathering to heat, the heated liquid is involved in even and strong heat radiation, Heating speed is very suift and can save energy.
本机采用了集热式加热法，被加热溶液完全处于均匀强烈的热辐射中，加热速度快，节省能源。
Compared with foreign products, the heating efficiency of developed bearing induction heating device is raised to 30%, heating speed is raised to 50%.
与国外同类型产品相比，本设计方案加热效率提高30%，加热速度提高50%。
The numerical result indicates that, the higher the final temperature of the specimens and the slower of the heating speed are, the bigger the error is.
分析结果表明，试件的最终加热温度越高，加热速度越慢，误差就越大。
Product Features: driving the process, the cab and the compartment heating. Heating speed, automatic detection, energy saving and environmental protection.
产品功能：行车过程中，为驾驶室内及车厢供暖。升温速度快，自动检测，节能环保。
Its characteristic is, fast heating speed, and overheat protection, avoid excessive current damage caused by burn machine, safe and convenient installation.
其特点是，加热速度快，并有过热保护，避免电流过大烧坏机器造成损，安全且安装方便。
As the glass heating container body heats and is directly contacted with water, high thermal efficiency, low power consumption and quick heating speed are available.
由于玻璃加热容器本体发热，直接与水接触，热效率高，耗电省，加热速度快。
The results show that threeelectrode DC ladle furnace, increasing heating speed and without arc bias, can overcome the shortcomings of bottom-electrode DC ladle furnace.
试验表明，三电极直流钢包炉技术可解决底电极式直流钢包炉存在的不足，使炉子加热速度快和不发生偏弧现象。
Main factors such as final heating temperature, heating time, heating speed and particle size of raw material on dry distillation of oil shale at low temperature were examined.
对影响油页岩低温干馏的主要因素进行了考察，其中包括最终加热温度、加热时间、加热速度及页岩粒度等因素。
The heating device provided by the utility model has the advantages of fast heating speed, high heating efficiency, simple structure, small size, and safe and reliable operation.
本加热装置，加热速度快，热效率高，结构简单，体积小，工作安全可靠。
The present invention has simple and compact structure, high heating efficiency, fast heating speed, homogeneous temperature distribution, easy-to-install and-replace heating element.
结构简单、紧凑，加热效率高，加热速度快且温度均匀，加热元件安装、更换方便。
Based on orthogonal design, the effects of reaction temperature, heating speed, weight percent of DVB, pyrolysis temperature and heat retaining time on the yield of PCS were discussed.
采用正交实验设计研究了反应温度、升温速率、二乙烯基苯的质量分数、裂解温度和保温时间五个因素对聚碳硅烷产率的影响。
The hardening case depth and hardness curve can be changed by adjusting heating time, heating power and cooling speed during induction hardening.
在感应淬火中，通过改变加热时间、加热功率和冷却速度可以改变淬硬层深度和硬度梯度。
Reactor through the container structure design and parameter configuration, realize the process requirements of the heating, cooling, evaporation and low speed mixing function.
反应釜通过对容器的结构设计与参数配置，实现工艺要求的加热、蒸发、冷却及低高速的混配功能。
Indoor test shows that the microwave dehydration is superior than the method of gravitational settling, Chemical or heating dehydration in speed and efficiency.
室内试验表明，微波脱水速度之快、效果之好，是重力沉降、化学脱水和加热脱水方法所不能比拟的。
In this article, a thorough investigation has been conducted into heating rate, holding time and cooling speed in an effort to work out an optimum ingot annealing process.
本文对铸件退火时如何控制加热速度、保温时间、冷却速度进行了充分的研究和探讨，为合理制定铸件退火工艺指出了方向。
The influence of heating temperature, forging-ending temperature and cooling speed on the mechanical properties of untempered 45v steel is investigated.
研究了加热温度、终锻温度、冷却速度对45V非调质钢力学性能的影响。
The effect of heating temperature and cooling speed on the micro-structure and mechanics characteristics of high-carbon-steel wire normalized was studied in this paper.
研究了加热温度和冷却速度对高碳钢正火钢丝的显微组织和力学性能的影响。
A second option is to increase heating time by reducing screw speed, but this also reduces output.
第二个备用方案通过减少螺杆转速来延长加热时间。但是，这样也减少了产量。
It possesses the characteristics of fast speed heating up, homogeneous heating, fuel conservation and novel structure.
它具有火焰不直接冲刷加热工件、升温速度快、加热温度均匀、节约燃料、结构新颖等特点。
It possesses the characteristics of fast speed heating up, homogeneous heating, fuel conservation and novel structure.
它具有火焰不直接冲刷加热工件、升温速度快、加热温度均匀、节约燃料、结构新颖等特点。
应用推荐