A higher gear after heat treatment the hardness and strength, and the shaft can be replaced with bushings installed in the operation.
齿轮经热处理有较高的硬度和强度，与轴一同安装在可更换的轴套内运转。
After proper heat treatment the steel will have a dual phase structure of austenite and bainite. arranged alternatively in the form of lath ferrite and thin film austenite.
经适当热处理，获得贝氏体铁素体板条与奥氏体薄膜交替排列的奥氏体-贝氏体双相组织。
The scientists found that UV treatment at room temperature can significantly reduce the heat subsequently required to pasteurize liquid egg whites.
科学家发现，在室温下用紫外线处理能够大大减少随后对蛋清加热杀菌所需的热量。
As Steelworkers, we are interested in the heat treatment of metals, because we have to know what effects the heat produced by welding or cutting has on metal.
钢铁工人最感兴趣的东西莫过于金属的热处理，因为我们得了解焊接与切割时产生的热对金属的影响。
Then, if needed, the pipe undergoes heat treatment or just goes to the quality testing line.
然后，如果有需要，这些管子将经过热处理或者直接进入质量测试环节。
Unfortunately, though flat tappets from China are cheap, their metallurgy is suspect-and the same goes for the quality of their machining, heat treatment and surface-hardening.
不幸的是尽管中国制造的平头挺杆物美价廉，但是其冶金技术遭到质疑，加工、热处理、表面硬化质量也遭质疑。
The film goes on with a purple hue but after the heat treatment appears clear.
这种涂层会呈现出一种紫色，但在烘烤之后看上去就是清晰透明了。
Successful heat treatment requires close control over all factors affecting the heating and cooling of a metal.
热处理要想顺利进行，必须对所有影响金属加热与冷却的因素进行严格控制。
The blade should undergo heat treatment.
这个叶片应该进行热处理。
The understanding of heat treatment is embraced by the broader study of metallurgy.
对热处理的理解包含于对冶金学较广泛的研究。
The results showed that the temperature and time of the heat treatment had different effect on the protein fractions.
结果表明，热处理温度和时间对样品中的蛋白质组分均有不同程度的影响。
Partial heat treatment in adoption of electric ceramic heater & overall heat treatment in heating treatment oven are included; and, overall heat treatment is recommended if the conditions permit.
包括采用陶瓷电加热器加热的局部热处理和采用热处理炉处理的整体热处理；条件适合的情况下优先采用整体热处理。
We will improve the efficiency of cleaning by accelerated heat treatment, while offering the highest standard in the industry.
在严格保持清洗标准的同时，通过加速热处理污垢的清洗来提高效率。
The electron beam local heat treatment (EBLHT) is a newly heat treatment that provides the advantages of high precision, flexility and efficiency, energy source saving and productivity improving.
电子束局部热处理是一种新型的热处理方式，具有精确度高、灵活性好、效率高、节省能源和提高生产率的优点。
Founded in 1970, Kaori specializes in metal heat treatment processing and the manufacture of metal products.
高力公司成立于1970年，致力于金属热处理和金属产品的制造。
Heat treatment is the operation of heating and cooling a metal in its solid state to change its physical properties.
热处理是将金属在固态加热和冷却以改变其物理性能的操作。
To contact the suppliers with the coating, heat treatment, cutting, marking processes related with production.
与生产车间相关的涂层，热处理，线切割，刻字等供应商的联系事宜。
The welding (heat treatment )of pipes have been carried out with incorporated programming.
管子的焊接（热处理）现已按照编写的程序完成。 。
Meanwhile, high surface hardness after heat treatment, the coating surface formed into the amorphous and crystalline mixture, the hardness is up to 1200hv.
同时表面硬度高，经热处理后，其镀层表面形成非晶态和晶态的混合物时，硬度可达1200 HV。
The influence of chemical composition and heat-treatment on the microstructure and mechanical properties of the steel is investigated.
研究了化学成份和热处理工艺对钢板力学性能和微观组织的影响规律。
The welding (heat treatment) of pipes have been carried out with incorporated programming.
管子的烧焊(热处理)现已按照编写的程序完成。
Can be different from the processing and heat treatment, to meet customer requirements.
可以进行不同的加工和热处理，满足客户的要求。
"New" gear, screw - using high quality materials, after high-frequency heat treatment, increase the service life of the machine.
“新型”齿轮、螺杆——选用优质材料，经过高频热处理，增加机器使用寿命。
There are three main operations in the heat treatment of steel: hardening, tempering and annealing.
钢的热处理操作主要有三种，即：淬火，回火和退火。
There are three main operations in the heat treatment of steel: hardening tempering and annealing.
钢的热处理操作主要有三种，即：淬火、回火和退火。
To introduce the technology reform of oil burning open fire furnace. The heat treatment control principle of the open fire furnace and its adopting measures are introduced emphatically.
介绍燃油明火加热炉的技术改造，着重介绍明火加热炉热工控制的原理以及采取的措施。
Plasticity increased 40% compared with conventional heat treatment, and achieved the highest value.
塑性在双重热处理时达到最高值，比常规热处理提高了40%左右。
Plasticity increased 40% compared with conventional heat treatment, and achieved the highest value.
塑性在双重热处理时达到最高值，比常规热处理提高了40%左右。
应用推荐