A novel heat transfer element called elastic tube bundles has been designed which has excellent response characteristics of vibration induced by the flow.
本文设计了一种新的传热元件- - -弹性管束，它对管内外流体流动具有良好的振动响应特性。
To find the basic heat transfer performance of fin-tube heat exchanger, the numerical analysis is carried for heat transfer element with single round and related fin area.
用数值方法分析了涡产生器式圆管管片式换热板芯单个圆管翅片区域内的传热与阻力性能。
The invention discloses a reinforced heat transfer element of a truncated cylindrical surface wing type vortex generator, belonging to the field of heat transfer parts of heat exchanger.
本发明公开了属于换热器传热零部件领域的一种斜截柱面翼式涡发生器强化传热元件。
In this paper, the study was focused on plate-fin oil cooler whose heat transfer element is hackle fin, and used ANSYS software to optimize the hackle fin on the basis of optimization theory.
本文主要以广泛应用的板翅式机油换热器为研究对象，以锯齿形翅片为传热单元，以优化设计理论为基础，应用ANSYS软件对锯齿形翅片进行优化。
The thermal module of the finite element software ANSYS is used to analyze the heat transfer of the gearbox.
该研究使用ANSYS有限元软件的热分析模块进行变速箱热传导分析计算。
Based on theories of computational fluid dynamics and heat transfer, an axial symmetry finite element model of velocity and temperature field of spot welding for aluminum alloy is established.
根据计算流体力学与传热学原理，建立了描述铝合金电阻点焊液态熔核流动行为和传热过程的轴对称有限元模型。
A finite element (fe) method for the prediction of the equivalent heat transfer parameters of the composite material with random multi-scale grains was presented.
针对预测多种尺度颗粒随机分布复合材料等效热传导参数的难点，提出了一种多尺度有限元方法。
The finite element formulation of the transient heat transfer problem was carried out for the composites based on the heat transfer differential equations with non-linear internal heat sources.
从含有非线性内热源的瞬态热传导方程出发，建立了用于分析复合材料热传导的有限元公式。
The transient heat transfer process of piston set-cylinder liner system in gasoline engine was researched with direct coupling finite element method (FEM).
采用直接耦合的有限元分析方法对一汽油机的活塞组—气缸套系统的瞬态传热过程进行了研究。
An approach to the thermal radiation of absorbing-emitting media, or weak absorbing media, e. g. burned gas, in the finite element analysis (FEA) of heat transfer is studied in this paper.
研究了有限元传热分析中有吸收—发射性介质(或称弱吸收性介质，例如燃气)参与辐射传热时的处理方法。
Based on elastic FEM theory and heat transfer theory, the author USES I-DEAS software as a CAE tool, builds the finite element analysis method and techniques of the principle shaft system on work.
本文采用I -DEAS软件作为计算机辅助分析的工具，基于弹塑性有限元理论和传热学理论，建立了工作状态下主轴系统的有限元分析方法及技术处理方法。
The finite element method is applied to solve the radiative heat transfer equation and energy conservation equation discretely.
利用有限单元法离散求解辐射传递方程和能量控制方程。
The finite element analysis and calculation of heat transfer in ablating bodies are presented.
本文采用有限元法，分析和计算了有热解的再入烧蚀体的传热问题。
Based on theories of viscoelasticity and heat transfer, the stress field of reflective crack under the temperature field is studied by finite element simulation.
考虑了沥青混合料的热粘弹特性，结合热传导理论，通过有限元数值模拟，研究在温度场作用下反射裂纹的应力场。
Analyzing the heat transfer of thermometric sensor for liquid steel, a relevant finite element model is developed for the sensor.
在分析钢水测温传感器传热过程的基础上，建立了测温传感器的有限元模型。
In this thesis the heat transfer theory and the finite element method are used to simulate the two dimension temperature field and the three dimension temperature field.
本文应用传热学基本原理和有限元基本方法，完成了二维、三维导热温度场的有限元数值模拟。
A numerical calculation of enhanced heat transfer efficiency of LFT is finished in this paper by the boundary element method.
本文运用边界单元法对低肋管的强化传热效能进行了数值计算。
The heat transfer model of the discharge has been established, and the removal rate could be significant promoted because of the explosion with the method of thermodynamic finite element analysis.
建立了电火花放电加工的热力学传导模型，通过有限元仿真方法得出具有放电爆炸力的单次脉冲能够明显提高难加工材料蚀除量的结论。
It has been shown in this paper, that in solving radiation heat transfer problems for finite element model of mechanical construction it is necessary to compute the shape factor matrix.
本文说明了在用有限元模式对机械结构的幅射换热问题进行求解时，必须计算形状因子矩阵。
The finite element method is then used to numerically simulate the heat transfer performance of microchannels cooling heat sink.
对高热流密度芯片的冷却要求进行了分析，采用有限元方法对微槽道冷却热沉的传热性能进行了数值模拟。
An explicit finite element method is presented in this paper to solve the heat transfer problem with ablation moving boundary in a moving coordinate system.
本文借助于运动坐标系用显式有限元算法求解烧蚀动边界的传热问题。
Film sheet is a new type of element to enhance heat transfer in tubular evaporative air cooler.
增膜板是管式蒸发空冷器中的新型强化传热元件。
This paper introduces the structure and the intensified heat-transfer mechanism of pin-finned tube, a recently developed new type heat-exchanging element.
介绍了新研制的一种新型换热元件—针翅管的结构及其强化传热原理。
The heat transfer and stress of submerged-arc furnace contact shoe under steady state was analyzed by using finite element software.
利用有限元软件对矿热炉铜瓦稳态工况进行传热和应力分析。
The empirical equations for predicting heat transfer coefficients and fluid resistance factors are given by the multi-element linear regression method.
并用多元回归法整理出计算传热与阻力系数的经验并联式。
A finite element method (FEM) model is established to analyze the solidification heat transfer and shell growth of the old bloom caster in a steel works and is tested by the measured data.
采用有限元方法，对某钢厂的大方坯连铸机的凝固传热情况以及坯壳凝固生长进行了数值模拟，并通过现场数据对模型进行了验证。
The temperature, strain and stress fields in modest hot slide were numerically simulated using sequentially coupled 3-dimensional heat transfer and stress equations and finite element method.
耦合三维传热和热应力方程，采用有限元法对加热炉半热滑轨的传热、应力和应变进行了数值模拟。
The temperature, strain and stress fields in modest hot slide were numerically simulated using sequentially coupled 3-dimensional heat transfer and stress equations and finite element method.
耦合三维传热和热应力方程，采用有限元法对加热炉半热滑轨的传热、应力和应变进行了数值模拟。
应用推荐