Because traditional black asphalt roofs heat up in summer and strain the air conditioners.
因为传统的黑柏油屋顶在夏天的时候会吸热，加重了空调的负荷。
The shellfish will open very quickly, as soon as most have opened remove from heat and strain into another pot, retaining the liquid.
用贝壳很快就会张口，等到大部分张口了，就立即将锅子移开，将锅中的汤汁过滤到另一个锅中备用。
The technique and its principle of high temperature strain measurement are introduced to determine heat sleeve stress about rotor retaining ring of large turbogenerator.
本文简要介绍了高温应变测量原理和技术在大型汽轮发电机转子护环热套应力测试中的成功应用。
The rings (for materials see Table 6.1) are heat-treated in different ways according to the strain on the gear rings and the contact pressure of the area carrying the highest load.
戒指(材料见表6.1)的热以不同的方式处理根据齿轮上的戒指，在载有最高负荷区接触压力的压力。
Acceleration, displacement and strain response from seismic tests for all main parts of the three types of heat exchangers were measured under both conditions with and without water.
在有水和无水条件下进行了该三台热交换器的地震响应试验，测得了热交换器中各重要部件的加速度、位移和应变响应值。
The dynamic mechanical properties and heat build up of black-filled rubber are predicted at different load conditions based on the concept of strain amplification.
基于应变放大因子的概念，对炭黑填充橡胶的动态力学性能和在不同外载条件下的生热性能作了分析预报。
The sensors are used for strain, temperature, heat flux, and surface flow, as well as for critical vehicle-health monitoring and characterization of components of future space and air vehicles.
该传感器用于应变，温度，热通量，和表面流动，以及用于未来的空间和空气的车辆部件的临界车辆健康监控和表征。
By turning down the heat, we can save some of the strain on our eyes.
关小供热装置，可以减轻眼部的紧张。
By analyzed the effects of fiber's spring, cycle flex, calorescence and the heat expand, the strain sensitivity and temperature sensitivity of FBG are obtained.
通过对光纤的弹光效应、光纤周期的伸缩、热光效应、热膨胀效应的分析得出了光纤光栅的应变灵敏度和温度灵敏度。
The results provide experimental basis for stability of surrounding rock when heat exits in the place of firing and variation regularity of strain field and displacement field.
这为研究煤炭地下气化时热作用下燃空区的围岩稳定及应力场和位移场的变化规律提供试验依据。
The invention provided one method to produce copper alloy with fine heat resisting and its slab and its intensity wasn't mostly decreased under the heat treatment, such as strain relief anneal.
根据本发明，提供在进行了应变消除退火等热处理的情况下也几乎不会引起强度降低且耐热性优良的铜合金及铜合金板的制法。
The relief of some of the internal strain energy of a previously cold-worked metal, usually by heat treatment.
冷塑性变形金属释放其部分应变能的过程叫回复，通常采用热处理的方法。
The experimental results indicate that all hydrogenated titanium alloy TC4 specimens exhibit a distinct heat softening effect, but that the strain rate hardening effect is comparatively weak.
结果表明，置氢tc 4钛合金具有较强的热软化效应，而应变率强化效应则相对较弱。
The stress strain conditions of integral rolled steel wheels with different shapes of web plates under the heat load related with various braking conditions are analyzed.
分析了与各种制动工况有关的热负荷作用下辐板形状不同的整体辗钢车轮的应力变形状态，给出了分析和计算结果。
A new large heat input welding high strength low alloy steel with low susceptivity to weld cold cracking was developed and the cold strain aging behavior was investigated.
研制了一种低焊接裂纹敏感性高能量输入焊接用低合金高强钢，并研究了其冷应变时效行为。
The temperature, strain and stress fields in modest hot slide were numerically simulated using sequentially coupled 3-dimensional heat transfer and stress equations and finite element method.
耦合三维传热和热应力方程，采用有限元法对加热炉半热滑轨的传热、应力和应变进行了数值模拟。
A method is put forward for computing the stress and strain waves in the structures under impact and heat loads.
利用有限元法，提出了一种应力波及变形波的计算方法，并对一些典型结构进行了运算。
The variation of microstructure and mechanical properties of the welding heat-affected zone of 2090 Al-Li alloy were investigated by means of the welding thermal, simulated and strain cycles test.
采用焊接热模拟试验方法研究了在焊接热循环和应力-应变循环同时作用下，2090铝锂合金焊接热影响区显微组织和力学性能的变化特征。
Using electric strain gage, the testing and study on the Header of spiral-plate heat exchangers are carried out.
对螺旋板换热器接管箱应力测试及研究后表明，接管箱结构是安全可靠的。
In the case of low strain rate, heat generated by SIMT in the interface is radiated and therefore temperature does not increase.
在低应变率，所产生的热量SIMT在界面辐射，因此温度不会增加。
In this paper, three mixed steel-fiber concrete and ordinary concrete specimen were tested for revealing their early thermal behavior and strain caused by hydrated heat.
本文通过三种不同钢纤维掺量的钢纤维混凝土早期水化热温度和变形实测，得到了不同掺量钢纤维混凝土的水化热温度及温度变形的时程线。
And with special packaging and installation, we eliminate the problem of cross-sensitive temperature and strain caused by expand with heat and contract with cold of coil winding.
采用特殊的封装和安装技术，消除了因线圈绕组铜质漆包线的热胀冷缩所造成的温度与应变交叉敏感。
A heat insulation shield ring is used to insulate heat between the strain gauge and the circuit board.
在应变计和电路板之间采用隔热挡圈隔热。
The early cracking of concrete is usually caused by dry shrinkage, autogenous shrinkage of cement hydration and thermal-strain by hydration heat of cement.
混凝土的早期开裂主要是由于混凝土失水所产生的干燥收缩、水泥水化所产生的混凝土自收缩以及水泥水化热所产生的温度应变所引起。
The merits of polymer are its high strain, good tenacity and easy making. The merits of ceramics are its excellent heat-proof and abrasion-proof.
塑料模具的优点是强度高、韧性好、易于制作，陶瓷模具的优点则是耐热性好、耐用性好。
The strain force transducer made of elastic steel ring and the fabricating technique are introduced. The elastic characteristic of the elastic element has been improved by heat treatment.
介绍了由弹性钢环制成的应变式力传感器及其制作工艺，特别是弹性元件经过热处理后改善了弹性特性。
Prolonging the heat-setting time to provide enough relaxation time for high elastic strain, which can also reduce the inner stress and the dry heat-shrinkage.
延长定型时间有利于高弹形变的松弛，降低内应力，有利于降低干热收缩。
Heat-fluid-solid coupling and contact thermo-elastic-plastic analysis was carried for a certain turbine blade-disc, and the stress and strain-time course was obtained in this paper.
采用随机有限元方法， 针对某燃气涡轮盘-片进行了热流固耦合及接触热弹塑性分析，得到了随机应力应变响应；
Liu had cruised into the 110 meter hurdles final at Crystal Palace after winning his heat in 13.27 seconds, but was unable to take his place on the starting line after suffering back strain.
刘翔在水晶宫以13.27秒的成绩进入了110米栏决赛，但是他背部受伤后就不能在起跑线上取得优势。
Liu had cruised into the 110 meter hurdles final at Crystal Palace after winning his heat in 13.27 seconds, but was unable to take his place on the starting line after suffering back strain.
刘翔在水晶宫以13.27秒的成绩进入了110米栏决赛，但是他背部受伤后就不能在起跑线上取得优势。
应用推荐