In this paper the effect of using direct heater on heat economy of sugar factories is discussed, also the quantity analysis method and calculation equations for vapor consumption are introduced.
本文讨论了直接加热器在糖厂使用对糖厂热力经济的影响，介绍了直接加热过程蒸汽消耗的数量分析方法和计算公式。
A simple iteration method is proposed for the complex nonlinear (regression) analysis of heat transfer data.
在对复杂的非线性方程进行回归分析时，提出了一种简单的迭代分析方法。
The finite element method was used for analysis of heat stress in chip on board(COB).
本文采用有限元法分析了板上芯片（COB）的热应力分布。
The finite element method was used for analysis of heat stress in chip on board (COB).
本文采用有限元法分析了板上芯片(COB)的热应力分布。
Heat analysis is an effective method of studying clay minerals.
热分析是研究粘土矿物的一种特效方法。
In the heat transfer analysis, combining temperature on tire side tested by drum test, a numerical inverse method is described for determining the heat convection boundary on tire side.
热传导分析中，依据实测的轮胎胎侧温度场，提出了一种基于实验的数值反演方法来确定胎侧的对流热边界条件。
Based on analysis of heat transfer in the process of liquid evaporation in details, an evaporation model was developed and the calculation method was also provided.
在对液体蒸发过程中的热量传递进行详细分析的基础上，推导建立了液体蒸发计算模型，并给出了求解方法。
The heat release rate of TBD620V12 diesel engine is analyzed by the method of combustion analysis.
利用燃烧分析方法，对TBD620 V 12柴油机的缸内压力曲线进行了放热规律分析。
Then, the heat treatment method of the ships' ballast water was analyzed through exergy analysis, and its advantage was discussed.
最后对压载水加热处理法进行了(火用)分析，探讨了其优越性。
The regularity of the microstructure evolution during the alloy heat treated at different conditions is investigated by the analysis of finite element method.
利用有限元方法对热处理期间的组织演化进行了分析；
Compared with deterwination results of two methods, it is shows that dilution heat method can reduce influence of analysis result causingly unburned coal in waste compost.
结果和结论：稀释热法可减少垃圾中的煤炭对分析结果的影响。
This thesis studied the heat transfer process of agitated vessels systemically and analysis the calculation method of heat transfer in agitated vessels.
本文系统地研究了搅拌设备的传热过程，分别对搅拌设备常用的传热构件-夹套和内冷管-的传热计算的方法流程进行了分析研究。
According to the finite element analysis of heat conduction with phase-change by using the enthalpy, an effective numerical method to eliminate the solution of iteration is presented.
通过对采用热焓处理相变导热问题的有限元分析，提出了消除迭代求解的一种有效算法。
Analysis of the calculations shows that the first method is responsible for the upgradient transport of sensible heat and for the higher fluxes in the near-neutral stratification over the Plateau.
对计算结果的对比分析表明，用感热通量的非局地多尺度湍流计算方法能计算出感热通量的逆梯度输送，也能计算出青藏高原近中性层结条件下明显的感热通量。
Trust force and bending moment result in heat expansion are calculated by adopting beam theory of mechanics of materials and applying force component analysis method.
采用材料力学的梁理论，应用力法分析方法，计算出热膨胀导致的推力和弯矩。
Applies the method of surface heat transfer analysis to calculating the convective heat transfer coefficient in order to solute the wall temperature.
建立了室内表面对流辐射耦合换热方程，着重讨论了采用表面换热分析法求解表面传热系数以求解壁温的方法。
The thermodynamic system heat balance calculation method based on a topological analysis is considered as the most successful computer based method for calculating thermal power plant heat balance.
热力系统拓扑分析的热平衡计算方法是火电厂热平衡计算中最成功的计算机处理方法。
Also, combining theoretical analysis method of cutting temperature with the FEA, the distribution of cutting heat in components of chip, workpiece and tool was researched.
结合剪切面及前刀面接触区的平均温度和切削热解析法，研究了高速切削中切削热在切屑、工件和刀具部分的量化分配规律。
This paper introduces the method of online performance analysis of generating units used in the optimal operating management, which is called Heat Deviation analysis (HDA).
介绍了在机组优化运行管理工作中对机组经济性进行在线监测的基本方法，即耗差分析方法。
The analysis results of height and diameter growth of test species, the method to select drought resistant and heat resistant afforestation species were introduced in details in this paper.
文章除论述元谋干热河谷区的自然条件、参试树种的高、径生长状况和分析结果外，还详细介绍了抗旱耐热造林树种的选择方法。
A formula of such heat conduction error is derived, and analysis of the factors affecting the error and its reduction method are presented in this paper.
本文对该导热误差公式进行了详细推导，分析了影响导热误差的各种因素，并且提出了减小导热误差的方法。
In this paper, an integrated finite difference method (IFDM) for numerical analysis of transient coupled heat and moisture flow in unsaturated soils is described.
本文介绍了求解非饱和土壤中热量和水分耦合传输问题的一种数值方法——积分有限差分方法(IFDM)。
In this paper, a new method of calculating the heat load of display cases was put forward based on the heat balance analysis of the air in it.
以陈列柜为研究对象，在对其柜内空气进行热平衡分析的基础上，提出了利用风幕进出口的焓差确定陈列柜热负荷的方法。
The result shows that the numerical analysis method used in our study is suitable for the periodic heat transfer process.
计算结果表明，对周期性变化的传热过程，采用这种数值分析方法是适宜的。
Composite interval mapping method was employed in mapping and analysis QTL controlling heat tolerance and some important agronomical traits in Chinese cabbage.
采用复合区间作图的方法对控制大白菜耐热性的数量性状基因位点进行定位和遗传效应研究。
Based on elastic FEM theory and heat transfer theory, the author USES I-DEAS software as a CAE tool, builds the finite element analysis method and techniques of the principle shaft system on work.
本文采用I -DEAS软件作为计算机辅助分析的工具，基于弹塑性有限元理论和传热学理论，建立了工作状态下主轴系统的有限元分析方法及技术处理方法。
The halogen acid production of halogen electrical wire and cable in heat-degradation was studied using the thermal analysis method and the halogen acid transgression installment.
利用热分析手段和卤酸气体逸出装置对含卤电线电缆热解时的卤酸气体逸出规律进行了研究。
Introducing heat exchange theory and finite element theory, and deducing the theory that applies finite element method to thermal analysis and thermal stress analysis.
介绍了传热学基本理论知识，有限元方法思想。对有限元法在热分析和热应力分析中的具体应用进行了理论推导。
Compared to the method of heat treatment, the efficiency and measuring precision of the CSLM insitu analysis are better.
与热处理试验方法相比，共聚焦激光扫描显微镜原位分析方法的效率较高、测量结果较精确。
On the basis of theoretical analysis, this paper gives a new calculation method of the heat transfer of thermal bridge.
本文在热桥传热理论分析的基础上，提出了一种新的热场畸变法。
应用推荐