The paper also describes the structure of PIC16F873 MCU, the system index, the design scheme of every module hardware and lists a detailed process.
分别描述了PIC16F873微处理器结构、系统指标及各模块硬件设计方案，并给出了详细的程序流程。
The paper focuses on the hardware design of vector signal processing module and the software realization of cross'spectral algorithm.
着重介绍了矢量信号处理模块的硬件设计以及互谱算法的软件实现。
The overall design scheme is researched. The hardware of current detection module, motor speed and location detection module and PWM output and fault input module is introduced in detail.
对系统总体设计方案进行了研究分析，硬件设计中详细介绍了控制回路的电流检测模块、电机转速和位置检测模块、PWM输出和故障输入电路。
On the basis of the overall system design, hardware and software by the end of each module.
在此基础上设计了系统的总体方案，最后通过硬件和软件实现了各个功能模块。
The hardware design of speech terminal is simple with a LCD module, while the user interface is more beautiful with the technology of chinese character and menu display.
液晶显示模块的采用使得语音终端硬件设计简单，同时汉字和菜单显示技术的使用使得用户界面更加美观。
This article detailed introduction system each hardware performance and function, as well as software design mentality and main software module flow chart.
本文详细的介绍了系统各个硬件的性能和作用，以及软件设计思路和主要软件模块的流程图。
This paper presents a process of a "Train Integrality monitoring system", include hardware design and software development of each module.
本文主要阐述的是列车完整性监测系统的硬件设计和相关模块的软件设计。
The whole scheme of the hardware design and software flow is expatiated, and introduced the system form of every module and the structural characteristic.
详细阐述了整个硬件设计方案以及软件流程，具体介绍了各功能模块的系统组成和结构特点。
We introduce the composition of the community telemedicine monitoring system, and the design of hardware, software and wireless module of wireless ECG signal sampler.
介绍了社区远程医疗监护系统的组成，无线心电信号采集器的硬件、软件及无线模块的设计。
Described are the design thought, technical implement and hardware disposition of the analog input module for the microcomputer network control unit XDU of the car function grade on EMUs.
阐述了电动车组车厢功能级微机网络控制单元xdu的模拟量输入模块的设计思路、技术实现以及硬件配置。
Then design and implementation of both hardware module and software for the device is demonstrated in detail.
然后，论文对故障诊断装置中各硬件功能模块的设计与实现及软件的编写进行了详细论述。
By using Electronic Design Automation (EDA) technology, the system realized function of I2C configuration Module in full hardware.
该设计利用数字系统设计自动化(EDA)技术实现了全硬件结构的I2C配置模块的功能。
The platform of blocking learning system using DSP technology and the design of the hardware module, software module and the building blocks experiment are also described.
该文介绍了自主模块化dsp技术的实验教学系统平台以及硬件模块、软件模块和积木式实验的设计。
In the area of hardware design, the system uses TMS320LF2407 DSP as microprocessor, and uses intelligent power module (IPM) as inverter, which is drived by high-speed optocouplers.
在系统的硬件设计中，处理器采用TMS320LF2407数字信号处理器（DSP）；逆变器采用智能功率模块（IPM），并采用高速光耦对其驱动。
The hardware design based on IP module of SOC is also discussed.
同时结合SOC的IP模块设计给出相应的硬件实现算法。
The design method of each module is modeling mathematic models firstly, and then using the mixed signal hardware description language to realize the module.
每个模块的设计方法是首先建立数学模型，然后用混合信号硬件描述语言完成数学模型的功能。
The hardware framework and design of the analog display module is presented, as well as software solutions and the measures to optimize its performances.
本文介绍了模拟视频模块的硬件框架和基本硬件设计，并详细描述了模拟视频转换模块的软件实现以及性能优化措施。
A novel design which combines PCI Core and user logic is adopted. In the hardware design, the clutter module is embedded.
采用基于PCI内核与PCI用户逻辑相结合的新型设计方案，并且在硬件设计中加入了杂波产生模块。
The design of hardware includes signal conditioning module and data acquisition module. The design of software includes interface program and upper layer program.
测试系统硬件设计包括对信号调理模块和数据采集模块的设计，软件设计包括接口函数和上层应用程序设计。
Hardware design of the main parts of the Bluetooth module is divided the application circuit power module, RS232 level translation module, Bluetooth module.
硬件部分的设计主要是对蓝牙模块应用电路的电源模块、RS232电平转换模块、蓝牙模块分别进行分析设计。
The software and hardware design of smart card interface module of system on a chip based on MIPS processor is discussed in this dissertation.
本文主要讨论基于MIPS处理器的片上系统的智能卡接口模块的软、硬件设计。
Puts emphasis on hardware design and realization of data acquisition module and the HPI communication module and other peripheral circuits of TMS320C6713.
本文着重阐述了信号采集放大、HPI通信模块以及TMS320C 6713的其他外围电路的硬件设计与实现。
This terminal's hardware design mainly includes the choice of microprocessor chip, the interface design of MC35 module of communication, the circuit design of memory modules and serial port and so on.
该终端的硬件设计，主要包括微处理器芯片的选型、MC35通讯模块的接口设计、存储器单元及串口电路设计等。
The design of hardware module includes A/D converter, DDC (Digital Down Converter) and DSP. The design and application of AD6640 and AD6624 are fully discussed in this part.
模块的硬件设计主要包括：A／D转换器、数字下变频器（DDC）以及DSP，详尽讨论了A／D 器件AD6640和DDC 器件AD6624的设计和应用；
The hardware design, bus protocol module division and its internal structure are introduced.
介绍该系统的硬件结构、总线协议的模块划分及其内部结构。
Next, study the various components of control system theory, selection, given the hardware design of each module.
接下来，研究了控制系统各部件的原理、选型，给出了各模块的硬件设计方案。
Next, study the various components of control system theory, selection, given the hardware design of each module.
接下来，研究了控制系统各部件的原理、选型，给出了各模块的硬件设计方案。
应用推荐