Now the plasma arc cutting machine part on gas pressure to control the flow, because when gun aperture, the gas control certain pressure and you control the flow.
现在的等离子弧切割机大多靠气体压力来控制流量，因为当枪体孔径一定时，控制了气体压力也就控制了流量。
In addition, plasma jet from the form into consideration, the jet from the gun in diameter is expands outward, nozzle increase in altitude inevitably lead to increased width incision.
另外，从等离子射流的形态方面考虑，射流直径在离开枪口后是向外膨胀的，喷嘴高度的增加必然引起切口宽度加大。
The main purpose of this paper is to introduce the structure and functions of plasma powder surfacing gun with cathode powder feeding.
本文主要对一种具有新的送粉方式——阴极内送粉的等离子堆焊枪的结构和性能进行了一定的探讨。
This paper presents you a simple structure plasma welding gun which is suitable for production.
本文介绍了一种适用于生产的、结构简单的等离子弧焊枪。
A compact hydrogen plasma gun system was designed and tested.
设计了一种紧凑型氢等离子体枪及驱动电路。
A plasma gun for spraying welding inside surface of deep hole with powder is designed and developed which has the property worked continuously at high temperature.
设计并研制了深内孔等离子弧粉末喷焊枪，该枪具有在高温下连续稳定工作的优异性能。
The main construction and key technique of long pulse length hollow cathode plasma electron gun are presented.
给出长脉冲空心阴极等离子体电子枪结构与关键技术。
The micro-plasma spraying gun adopted unique passage and spraying nozzle structure and center axial to be sent the powder method.
设计的微弧等离子喷枪采用了独特的气路结构、喷嘴结构和中心轴向送粉方式；
A substrate for the growth of a carbon nanotube having a catalyst layer microparticulated by using an arc plasma gun.
本发明涉及具有使用电弧等离子枪进行微粒化的催化剂层的碳纳米管成长用基板。
The particle diameter of the catalyst for the growth of CNT is regulated by the number of shots of the arc plasma gun.
通过电弧等离子枪的发射数控制CNT成长用催化剂的粒径。
In this paper, the technical features, working principles and application of a Russian Thermal-Pyrolysis-Type plasma ignition technology, as well as the associated plasma gun was introduced.
介绍了俄罗斯热裂解型等离子点火技术的技术特点、工作原理、应用状况和其等离子枪的结构优点。
It seems too that there is a high-powered, high-voltage plasma accelerator which may be put to use to transmit electric current, or even to produce a 'death-ray', or quite simply to feed a plasma gun.
看来太有高功率，高电压等离子加速器可投入使用传输电流，或什至产生的死线'，或者干脆给了等离子枪。
In this paper, the axial-fed plasma spraying gun was used to obtain ceramic coatings on steels. Its parameters, properties and microstructure were compared with those of a traditional one.
对比研究了新型轴向送粉等离子涂枪和普通等离子喷涂枪的喷涂工艺参数和制备涂层的性能及其组织。
It is recommended that the mode of combining the small oil gun ignition system with the plasma ignition system can be adopted at the time of boiler design.
建议锅炉设计时采用小油枪点火系统和等离子点火系统相结合方式。
The results showed that the power used by the axial-fed plasma gun is much lower, and the properties of the coatings are better than those prepared with traditional gun.
试验结果表明：轴向送粉式等离子喷涂枪的功率明显低于普通等离子喷涂枪，其喷的陶瓷涂层的性能优于普通等离子喷涂。
The discharging characteristic of the coaxial plasma gun is researched.
论文研究了同轴枪的放电特性。
The principles to designed the hole used plasma gun is discussed and two kind of spraying welding procedures are put forward.
论述了内孔喷焊装置的设计原则，并提出了两种规格机筒喷焊的最佳规范。
It can be used to spray metallic, carbide and oxide powders. The supersonic plasma spraying gun has a single-anode, internal feeding structure.
单阳极内送粉结构的高效能超音速等离子喷枪，为国内外研究超音速等离子喷涂技术开创了一条新路。
It can be used to spray metallic, carbide and oxide powders. The supersonic plasma spraying gun has a single-anode, internal feeding structure.
单阳极内送粉结构的高效能超音速等离子喷枪，为国内外研究超音速等离子喷涂技术开创了一条新路。
应用推荐