Grinding wheel method has to be taken to avoid deformation during rework for think thickness material or strict dimension requirement parts.
对厚度较薄或要求外形尺寸严格的产品，返修时应采用砂轮打磨等方法，以防变形。
As you can see, this method can be applied only when the surface to be ground is shorter than the width of the grinding wheel used.
正如料想的那样，这种方法只在要磨削表面比所用砂轮宽度短时才使用。
The transverse method, in which both the grinding wheel and the workpiece rotate and longitudinal linear feed is applied to enable grinding of the whole length.
横向方法：这种方法中砂轮与工件均旋转且采用线性纵向进给以保证能磨削整个长度。
A new method about the profile shaping of grinding wheel is introduced. CNC technology is combined with grinding wheel shaping to achieve high flexibility, high precision and high efficiency.
介绍了仿形砂轮修形的一种新方法，将砂轮的修形与数控技术相结合，可使砂轮修整达到柔性好、精度高、效率高的目的。
The method of dressing ceramic-bonded corundum grinding wheel by using diamond dressing wheel, then using dressed profile grinding wheel grinds roller surfaces of arc shape is introduced.
介绍了用金刚石滚轮成型修整陶瓷结合剂刚玉砂轮、然后用所修得的成型砂轮磨削表面具有圆弧形状的辊子的方法。
There are two methods for formate gear grinding: Waguri method and flared cup wheel method.
成形法大轮的磨削通常有两种方法：瓦古里磨削和扩口杯磨削。
The working efficiency by this method is higher than that by the method of double small dish emery wheel grinding.
本方法是采用成型砂轮磨削齿型，比双碟型砂轮磨削生产效率要高。
Under the same experimental conditions, the comparison experiment has processed between the new method and continuous grinding method with CBN wheel.
在相同磨削条件下，对新方法和CBN砂轮连续磨削进行了对比实验。
Superhard - abrasive grinding wheel has decisive influences on the advance of grinding technique, this paper introduces the reasonable using method of superhard -abrasive grinding wheel.
超硬磨料砂轮对磨削加工技术的进步有决定性影响，本文介绍了超硬磨料砂轮合理使用的方法。
This paper presents a new analytic calculating method which is a direct method derived from the profile of the relief grinding wheel according to the shape of the cutting edge of a hob.
本文提出一种可根据滚刀刀刃形状要求，直接求出铲磨砂轮廓形的解析计算方法。
The gear grinding machine with conical wheel is retrofitted into CNC, the CNC controlled method for tooth profile relief is researched and applied, a comparison with traditional method is carried out.
在锥面砂轮型磨齿机上进行数控改造，对齿轮修形的CNC控制方法进行了研究和应用，并与传统的齿轮修形方法进行比较。
A new method to control elastic yielding wheel in grinding process is presented.
本文提出了一种控制磨削过程中弹性退让的新方法。
The common property of grindability of fine ceramics material with diamond grinding wheel was studied. Different phenomenon was obtained with different grinding method.
本文探讨了精细陶瓷材料的金刚石砂轮磨削性能的共同特点以及不同种类陶瓷和不同磨削方式的影响。
At the same time, the thought and the method of research are not only suited for the grinding-wheel-rack development, but also can be provided as reference for other product development.
同时，课题开发的思想和方法不仅适合于磨床砂轮架部件的二次开发，也可供其它产品二次开发参考。
A new method for dressing grinding wheel is presented.
提出了修整铲磨砂轮的新工艺。
It offered a new method to improve the properties of vitrified bond of CBN grinding wheel.
这也为今后CBN砂轮陶瓷结合剂性能的提高提供了新方法。
The paper introduces manufacture method of special pipe-cutting machine for rollers, which have a little labor intensity and consumption compared with old grinding wheel-cutting machine.
王桂香，托辊专用切管机的设计制作介绍了托辊专用切管机的制作方法，解决了原有砂轮切割机劳动强度大及消耗大的问题。
Firstly, combining the theory and material feature of grinding, the paper presents the method of using Electroplated Diamond wheel as the grinding tools;
首先，结合磨削加工原理及材料特性，提出采用电镀金刚石砂轮作为磨削工具；
It is a reliable and useful new method to moniter the dul-ling process of grinding wheel by making use of acoustic emission (AE).
用声发射技术监测砂轮磨钝过程是一种方便而且可靠的新方法。
In this paper a new grinding method, using small cylindrical face grinding wheel to grind straight outline hourglass worm, is put forward and the mathematical model is set up.
本文提出了用小圆柱面砂轮磨削直廓环面蜗杆的新方法，建立了数学模型。
This paper studies the relief grinding problem of the hob of point contact worm gear drive and puts forward a one-parameter enveloping method to calculate the axial profile of relief grinding wheel.
本文研究了加工经可控曲率修正的蜗轮齿面的滚刀设计问题，建立了相应的数学模型，并应用计算铲磨蜗轮滚刀刃形曲线的单参数包络法，求出铲磨砂轮截形曲线。
The key to fine machining gear by profile grinding method is how to calculate and shave the axis section profile of grinding wheel.
成形磨削法精加工齿轮的关键在于修整砂轮的截面形状。
Returning original processing method of AE signals is pretended to monitoring grinding wheel dull in this paper, based on this, dull monitoring and dressing system for grinding wheel is developed;
利用声发射（AE）信号归原处理法对砂轮磨钝程度进行监测，在此基础上开发了砂轮磨钝监测及自动修整系统。
A method for grinding internal gear using spherical worm emery-wheel is presented.
提出用球形蜗杆砂轮连续分度展成磨削内齿轮的概念，阐述了其磨齿原理。
Present a method of sharpening twist drills in the interior conical surface and exterior conical surface grinding wheel. A novel sharpening device of linkage-gear compound mechanism is designed.
提出了利用外锥面砂轮实现内锥面刃磨钻头的方法，设计了实现该方法的连杆齿轮组合机构。
For a group of grinding wheel machines, we have explored the corresponding relationship between abnormal sound and machine fault, and also pointed out the resolving method of the machine fault.
以一组异响砂轮机为例，研究了异响与机器故障的对应关系、指出了解决故障的方法。
So it's necessary to research the truing and dressing method of the grinding wheel.
于是对超硬磨料金刚石砂轮修整技术的研究成为必要。
The method of grinding wheel wear test and error compensation is presented based on acoustic emission technique in this paper.
提出了一种基于声发射检测技术的砂轮磨损测量及加工误差补偿系统。
Grinding technique using a diamond grinding wheel is an effective method for the precision machining of the hard and brittle materials.
金刚石砂轮磨削技术是硬脆性材料精密加工的有效方法。
Grinding technique using a diamond grinding wheel is an effective method for the precision machining of the hard and brittle materials.
金刚石砂轮磨削技术是硬脆性材料精密加工的有效方法。
应用推荐