Hammer grinder with high grinding rate can fully increase the starch dissociation rate.
锤式粉碎机，破碎率高，能充分提高淀粉的游离率。
With the increase of grinding speed or the abrasive grain size of the grinding belt, the grinding rate increases.
提高砂带速度、工件转速以及增大砂带磨粒粒度可有效地提高花岗岩的磨削效率。
It is pivotal factor to reduce the fineness of outlet material for improving the grinding rate and separating efficiency.
降低出磨物料细度是提高粉磨速度及粉磨效率的关键因素。
He has been grinding out cheap romantic stories at the rate of one a week.
他一直以每周一篇的速度生拼硬凑廉价的浪漫小说。
These measurements have correlated well with those made in conventional constant material removal rate grinding tests.
这些测量结果与用传统的恒磨除率磨削试验具有良好的相关性。
In order to get low surface roughness and high material remove rate, basic research on the optimization of process parameters in creep feed ultrasonic grinding engineering ceramics was conducted.
为了在加工中获得良好的表面质量和大的材料去除率，本文开展了蠕动进给超声磨削工程陶瓷参数优化的基础研究。
The influence of varying speed grinding on the chatter increasing rate has been studied experimentally.
进行了变速磨削对颤振增长率影响的试验研究。
The summary has a analysis about the main factor about the influence on grinding machine grinding working rate, and have a summarize about the improvement method as well as the achievement.
分析了影响修磨机作业率的主要因素，提升了提高修磨机作业率、改善设备持续的具体措施，总结了修磨机作业提高率、改善设备持续措施的实施效果。
By the principle of reversal process, the formula of material removal rate (MRR) in wafer rotation grinding process is deduced. The relationship between MRR and the grinding parameters is given.
在反转法的原理上，建立了硅片自旋转磨削材料去除率的理论模型，推导了材料去除率公式，分析了磨削工艺参数与材料去除率的关系。
The Influence of three grinding fluids on grinding force, metal material removal rate, surface roughness of ground workpiece, and the extent of grinding bum were investigated in this paper.
本文研究了三种磨削液对磨削力、金属磨除率、表面粗糙度和烧伤程度的影响。
On the base of the constant removal rate of the metal material, the motion model of tangential point tracing grinding of Non-round parts should be given respectively according to type of the parts.
基于恒金属去除率的原则，根据零件的特点分别建立了非圆零件切点跟踪磨削的运动模型。
Trial study on the application of grinding AIDS was conducted aiming at improving the quality of fly-ash cement, reducing power consumption of grinding and increasing the adding rate of fly-ash.
为提高粉煤灰水泥中粉煤灰的掺量，降低粉磨电耗，并改善粉煤灰水泥性能，进行了助磨剂的应用试验研究。
The influence of depth of grinding, feed rate and circular linear speed of the grinding wheel on the grinding forces with respect to the maximum chip thickness of a single active diamond was analyzed.
从单颗金刚石最大切削厚度的角度，分析了磨削深度、进给速度和砂轮线速度对磨削力的影响。
As compared with the ordinary abrasive-band grinding, the ultrasonic abrasive-band precise grinding can lower the roughness of machined surface and raise the removal rate.
和普通砂带磨削相比，超声砂带精密磨削可降低加工表面粗糙度和提高加工速度。
As the grinding time is prolonged, the rate of size reduction decreases gradually.
但随着球磨时间的延长，颗粒粒径的减小速率会逐渐降低。
Compared with turning, milling and grinding, the abrasive belt grinding has higher production rate and available factor of power of machine tool.
砂带磨削比车削、铣削和砂轮磨削的生产率高，机床功率利用率高，经济效果显著。
He eventually hopes to use rock-cutting ROVs that will drive across the sea floor, grinding ore as they go and sending it to the surface via a tube at a rate of 400 tonnes per hour.
海登说，这是因为ROV技术只是在最近才得以真正用于实战。他最终希望能用可以横穿海底的岩石开掘机ROV将矿石碾碎，然后通过一条管道以每小时400吨的速度将其运至海面。
The particle size of grinding circuit is the important factor to the grade of concentrated ore and metal recovery rate.
磨矿分级作业是选矿生产过程中至关重要的环节，磨矿粒度的好坏直接影响到浮选的精矿品位和回收率。
The coal feed rate and the size of the grinding table are variable.
饲料粒径大小随鱼的生长而增大，并维持在鱼种口全开时的一半左右。
The technological parameters such as electrolysis current, the rotation speed of grinding wheel and the feed rate etc, have been optimized.
研究了砂轮转速、进给量等工艺参数对石英玻璃表面粗糙度的影响；
Result: the primary factor which influenced the extraction rate was grinding degree, then it was time of distillation, solid-liquid ratio and soaking time.
结果：影响挥发油得率的主要因素为粉碎度，其次为蒸馏时间和料液比，最后为浸泡时间。
Microwave-assisted extraction of gingerol from ginger was studied. The main effect factors were discussed such as microwave power, irradiation time, the rate of solid and liquid and grinding degree.
研究利用微波辅助萃取生姜中姜辣素的新工艺，探讨了不同微波功率、时间、固液比、颗粒度对提取率的影响。
A technical scheme of grinding-waving bed to be sifted out is adopted and the fined ore grade can reach 40.41%. The rate of recovery is 70.92% in choosing target.
对于富矿的选别，采用粗磨跳汰—摇床的技术方案，得到的锰精矿品位为40.41%，回收率为70.92%的选别指标。
A technical scheme of grinding-waving bed to be sifted out is adopted and the fined ore grade can reach 40.41%. The rate of recovery is 70.92% in choosing target.
对于富矿的选别，采用粗磨跳汰—摇床的技术方案，得到的锰精矿品位为40.41%，回收率为70.92%的选别指标。
应用推荐