Based on the kinematic relationship of grinding, the mathematical model of grinding parameter has been formulated.
根据刃磨运动关系建立钻尖刃磨的数学模型。
The solution of grinding parameters is obtained from the given design parameters. The grinding parameter redundancy problem is resolved.
根据设计参数精确并唯一地求出刃磨参数，解决了刃磨参数求解的不确定性问题。
Uneven components of quenched martensite and residual austenite structure and improper grinding parameter are attributed to the main causes for cracks.
淬火组织中马氏体与残余奥氏体的成分不均匀及磨削用量参数选择不当是导致裂纹出现的主要原因。
Based on the kinematic relationship of regrinding, a mathematical model was established for the chisel edge regrinding and the solution of grinding parameter was obtained.
根据刃磨的运动关系建立了新型微钻头横刃修磨的数学模型并求出了刃磨参数。
The experimental studies demonstrated that reasonable abrasive and hardness grade of wheel, grinding parameter, high efficiency grinding fluid and CBN wheel will avoid effectively th...
试验研究表明，合理的砂轮磨料和硬度等级、合理的磨削用量、高效磨削液和CBN砂轮将有效地避免钛合金的磨削烧伤和磨削裂纹。
The drill point structural parameters of ellipse cone flank grinding are calculated. The influence of cone structural parameter and grinding parameter to drill point structural parameter is analyzed.
计算了椭圆锥面后刀面刃磨钻尖的结构参数，分析了锥面机构参数以及刃磨参数对钻尖结构参数的影响。
This paper describes structure features, series design and parameter selection in application of Type QXM pneumatic planet grinding head.
本文介绍了QX M型气动行星磨头的结构特点、系列设计及应用时的参数选择。
The grinding pressure is a key parameter to influence the grinding efficiency, surface quality and cutting edge quality in the monocrystal diamond tool grinding.
在单晶金刚石刀具的研磨过程中，研磨压力是一个影响研磨效率、表面质量、刃口质量等的关键工艺参数。
This system can optimize the parameter of gears, check relief grinding of tooth back automatically and design the gear hobs rapidly and reliably.
该系统可优化滚刀设计参数，自动校核齿背铲磨，实现齿轮刀具快速可靠的设计。
In study of constant force grinding, a calculation method, which could calculate frequency range of frequency feature parameter automatically, is presented based on generic algorithm in this paper.
本文结合恒力磨削的研究，基于遗传算法提出了一种可自动地确定测试信号频域特征参数频率计算范围的方法。
The fracturing parameter characteristics of binary mixture components were studied with the aid of batch grinding kinetic model.
借助于分批磨碎动力学模型，研究了两组分混合物料组分的碎裂参数特性。
Experimental results show that the dressing parameter depending upon the average dimension of grinding particle is proper.
试验结果表明，按砂轮磨粒平均尺寸选择砂轮修整参数是合适的。
Experimental investigations on the influence of both grinding process parameter and turning and dressing on the surface roughness of the ground workpiece are conducted.
本文对磨削工艺参数与砂轮修整轨迹对成形磨削表面粗糙度的影响进行实验研究。
Because of the multi-parameter of grinding models and the complicacy of grinding process, it is important for the computer simulation and prediction techniques to be applied to the field of grinding.
磨削模型的多参数和磨削过程的复杂性决定了计算机仿真技术应用于磨削加工的重要性。
Using a helical involute pinion surface to form the grinding worm surface, a helical face gear is formed via a two-parameter worm envelope.
针对面齿轮硬齿面磨削加工中存在的困难，提出用蜗杆砂轮磨削的双参数法来磨削面齿轮。
The existing ultrafine grinding equipment can not conform to the request of this degree of wollastonite product and have higher length-diameter ratio until optimize its operational parameter.
现有的超细粉碎设备必须优化其工作参数才能在硅灰石产品细度符合要求的同时又有较高的长径比。
The 3D grinding and meshing model of Y7125 gear grinder is established, this is based on feature and parameter.
阐述Y7125磨齿机基于特征的三维参数化磨削模型和磨齿啮合模型的建立。
The available and practical parameter of grinding kneading block can be obtained by grinding experiments.
本论文通过捏合块磨削工艺试验，获取了实用可行的捏合块磨削参数。
It researched the slag gas blowing grinding craftwork parameter thorough, bring forward the feasible craftwork parameter.
深入细致的研究了钢渣气碎工艺参数，提出了适宜的工艺参数。
It assays technological parameter and major features of abrasive belt grinding. It also discusses the ways as to the improvement of productivity and quality of wiping out welded seam and polishing.
设计了去焊缝及抛光用的砂带异型涂附磨具及砂带磨削装置，分析了砂带磨削工艺参数和主要特点，讨论了提高去焊缝及抛光加工质量、生产效率的途径。
Finally, according to the result of classifying study the system automatically selects the technology parameter to control the grinding quality.
系统按分类学习结果自动选择工艺参数以控制磨削加工质量。
In the process of grinding, the grinding force is a key physical parameter, generally reflecting properties and state of material, and the characteristics of grinding wheel and abrasion state.
在硅片磨削过程中，磨削力是综合反映工件材料性质和状况、砂轮特性和磨损状态、加工用量和工艺系统参数等因素的一个重要物理参量。
Tenet chosen and method determined of technical parameter has been explained. Its reliability and its superiority is verified with grinding test.
说明了主要技术参数的选择原则和确定方法，并通过砂光试验验证了该产品的可靠性和优越性。
This paper studies the relief grinding problem of the hob of point contact worm gear drive and puts forward a one-parameter enveloping method to calculate the axial profile of relief grinding wheel.
本文研究了加工经可控曲率修正的蜗轮齿面的滚刀设计问题，建立了相应的数学模型，并应用计算铲磨蜗轮滚刀刃形曲线的单参数包络法，求出铲磨砂轮截形曲线。
Using a helical involute pinion surface to form the grinding worm surface, a helical face gear is formed via a two-parameter worm envelope.
借助一个渐开线斜齿圆柱齿轮的刀具齿面推导出蜗杆砂轮齿面，由蜗杆砂轮齿面经双参数包络生成斜齿面齿轮齿面。
Using a helical involute pinion surface to form the grinding worm surface, a helical face gear is formed via a two-parameter worm envelope.
借助一个渐开线斜齿圆柱齿轮的刀具齿面推导出蜗杆砂轮齿面，由蜗杆砂轮齿面经双参数包络生成斜齿面齿轮齿面。
应用推荐