Higher pressure loading rate may cause higher green density.
加压速度快可获得高压坯密度。
Effect of sintering temperature and sintering holding time on green density was analyzed.
分析了烧结温度和烧结保温时间对压坯密度的影响。
Influences of processing parameters of warm compaction on green density of 420 stainless steel were studied.
对420不锈钢粉末进行温压，探索温压工艺参数对压坯密度的影响，并对温压与室温模压添加0。
The effects of impact energy and impact times on the green density, the maximal impact force and the withdraw force of specimen were investigated.
研究电解铜粉高速压制成形工艺，探讨冲击能量、压制次数对生坯密度、最大冲击力和脱模力的影响。
The higher the suspension stability, the higher the green density, and the more homogenous the microstructure, but the smaller the permeation rate.
料浆愈稳定，生坯密度愈高，微观结构愈均匀，但吸浆速度减慢。
Results of this study show that, powder mixing method, compaction temperature and binder concentration have significant effects on the green density.
研究结果表明，不同预粘结工艺、压制温度和粘结剂含量对压坯密度影响很大。
The effects of impact energy and compaction methods on the green density, the maximal impact force, the withdraw force and the radial springback were discussed.
研究电解铜粉高速压制成形工艺，探讨冲击能量、压制次数对生坯密度、最大冲击力和脱模力的影响。
Results show that warm compaction can improve the green density and strength of 316L powder greatly and improve its sintered density and tensile strength as well.
试验结果表明：温压工艺能够较大幅度地提高316L不锈钢粉末的生坯密度和生坯强度，也能提高其烧结后的密度和抗拉强度。
On the other side, the green density is hard to increase for the restriction of intensity of die, which affects directly the quality and property of function ceramics product.
另一方面，由于模具强度的限制，压制密度也难以提高，这直接影响功能陶瓷制品的质量和性能。
To insure more densification but deformation of glass beads, the green density should be increased, and the burnout temperature of binder should be below the toplimit of transformation temperature.
为保证绝缘子获得较高致密度而不变形，应尽量提高生坯密度，同时排蜡温度应低于该种玻璃的转变温度上限。
A laser pulse can modify the electron's state so that it has the density distribution shown in green.
一束激光脉冲可以改变电子的状态，使得其有了图中绿色显示的密度分布。
A laser pulse can modify the electron s state so that it has the density distribution shown in green.
一束激光脉冲可以改变电子的状态，使得其有了图中绿色显示的密度分布。
For centuries, we've been using high-density fossil fuels, but peaking oil supplies and climate concerns have given new life to green technologies.
数百年来，我们一直在使用高密度的化石燃料，但峰值的石油供应和对气候的关注给了绿色能源技术新的生命。
On equal density, green films got less radiation dose than blue films and the dose could be reduced to 57 %.
两片在等密度下比较，绿组的表皮剂量比蓝组可降低到57%。
With the two methods the homogenous green bodies without density gradient and high density sintered ceramic bodies can be gained.
利用这两种成型技术可以获得均匀、无密度梯度的近净尺寸坯体和致密陶瓷制品。
Effects of AC and anther density on pollen embryo and callus production and green plant regeneration were studied in a filter-sterilized, liquid-medium culture system.
在过滤灭菌的液体培养体系中研究了甘露醇预培养和诱导培养过程中活性碳和花药密度对大麦花培效率的影响。
ELA: Today's city is full of high density public space lacking green element. How to create a space in such city that gives people the feeling of happiness?
第一景观：如何在现在非常高密度、缺乏绿色公共空间的城市里营造给予人们幸福感的空间呢？
Both solid volume fraction and dispersant volume fraction had some effects on shrinkage and density of green body.
固相质量分数和引发剂质量分数都会影响坯体的线性收缩率和密度。
Green-pressing density, simulated green-pressing strength and bonding momental of high frequency brazing were assayed.
测定了它们的冷压生坯密度、模拟生坯强度以及高频钎焊的结合力矩；
Theshrinkage of green body was 0.3% and the density deviation was 0.32%. After infiltrated with molten silicon, the shrinkage of sintering body had another 0.2%.
成型坯体的干燥收缩率小于0.3%，密度分布的标准偏差为0.32%，反应烧结过程中，坯体的收缩率小于0.2%。
The green leaves of vegetables through tissue homogenate, differential centrifugation separation, density gradient centrifugation purify sample of chloroplast.
对蔬菜绿叶通过组织匀浆，差速离心分离，密度梯度离心分离、纯化、提取叶绿体。
Results show that the density of green parts under dynamic molding conditions is obviously higher than under steady molding conditions.
实验结果表明，各动态成型条件下的型坯密度明显大于稳态成型条件下的密度。
The composite green body is characterized by sufficient strength for demoulding, high density homogeneity, appropriate porosity and little dimensional change rate.
坯体具有足够的脱模强度、较高的密度均匀性和合适的孔隙率以及尺寸变化率小等特点。
With the increase of solids loading, the particle density increases and the bending strength of green body decreases for the network polymer accounting for only a small amount of the composition.
随着固相体积分数的增加，单位面积的颗粒分布密度增大，网络高分子在成分中只占少量，坯体抗弯强度降低。
The ceramic green body is characterized by little dimensional change rate, high green body density, high homogeneity, sufficient strength for demoulding and good green body surface quality.
陶瓷坯体具有尺寸变化率小，密度较高且均匀，足够的脱模强度，表面质量好等特点。
Warm compaction process yields higher density and improved green strength over conventionally processed iron powder compacts.
温压工艺可达到比传统铁粉压块更高的密度与生坯强度。
Noise is a big issue for people living in high-density housing, and the green belt is under constant pressure from developers.
而且绿色带也不断受到房地产开发者们的压力。
For the green body containing a certain size of SiC powders, the carbon particle should be less than a certain size, or else, the density and fracture strength of RBSC decrease wit...
对于一定粒度的碳化硅粉而言，加入到生坯中碳粉粒度应小于一定尺寸，否则，陶瓷的断裂强度和密度将随碳粉粒度的增大而降低。
Vacuum carbothermal reduction of N2 -atomized 316l powders and effects of green compact density on hot extrusion and properties of extruded products were investigated.
研究了氮气雾化316L粉的真空碳热还原烧结规律和挤压坯密度对热挤压工艺和挤压材性能的影响。
The mass segregation phenomenon became more obvious at lower solid content and higher acceleration and there were density gradient in green compacts.
在较低的固相含量和较高的离心加速度下，浆料的分离现象明显，生坯中出现密度梯度。
应用推荐