The girder is square in cross-section.
这个大梁的截面是方形的。
Following the process of construction, considering the worst loads, according to the assumption of plane section, the steel girder alone and the composite girder are computed respectively.
按照实际施工过程,考虑最不利计算荷载,根据平截面假定,分别对钢梁单独受力和钢-混凝土组合梁两种工况进行计算。
The structure features of bearing column girder transfer floor such as large section and complicated mechanical behaviors are introduced, which realize the transfer of structural axes.
介绍了托柱梁式转换层结构实现了上下层结构柱网改变、截面大、结构受力复杂等结构形式特点;
The calculating differences on section modulus of wind girder in storage oil tank design codes between China, Japan, America and British were mentioned.
介绍了中国、美国、日本和英国油罐设计规范中在抗风圈截面模数计算上的区别。
With its excellent section characters, the prestressed concrete box beam plays a main role in the girder bridge.
预应力混凝土箱梁以其优良的截面性质在梁桥中占据了主要地位。
Long span PC box girder Bridges have been widely used in middling span Bridges in highway engineering as they possess many merits, such as huge torsion stiffness, high section efficiency.
大跨径PC箱梁桥因为其具有截面抗扭刚度大、效率高等优点,被广泛应用于中等跨径的公路桥梁工程中。
Based on transformed section method, shear lag effect of continuous box girder was analyzed adopting variational principle, and compared with design code and experimental result.
基于换算截面法,运用变分原理对开裂混凝土连续箱梁的剪力滞效应进行了分析,并与规范方法和试验结果进行了对比。
Finite beam segment method is an effective way to solve the shear lag problem of statically indeterminate structure, such as continuous girder with constant cross section etc.
有限梁段法是求解超静定结构(如连续梁等)剪力滞行之有效的方法。
Cracks occurred in the main weld joining the web and upper wing panel of an overhead crane girder of I-section, some of which have expanded to the structure material and even led to girder fracture.
桥式起重机采用工字形截面作为主梁,使用多年后该结构形式的主梁上翼缘板和腹板连接的主焊缝及母材多处产生裂纹,甚至发生主梁断裂事故。
The project has used large-span secondary girder pre-stressed ceiling structure, which effectively reduces the beam cross-section height and ensures the total height and building height requirements.
工程中采用了大跨度次梁预应力楼盖结构,有效地降低梁的截面高度,确保层高和建筑物总高度的要求,此外还采用了超长混凝土结构无缝设计等新技术。
It was examined that the dynamic peculiarity, the welding line flaw, the size of steel member section and the rusty phenomenon of an existing municipal steel-box girder bridge.
对某在用市政钢箱梁桥的动力特性、焊缝缺陷、应力和变形、钢构件截面尺寸和锈蚀情况进行了检测,按规范要求验算了结构的整体稳定和局部稳定。
When a welded I-section plate girder is subjected to bending or shearing, buckling of web in elastic range will be restrained by flanges.
在纯弯或纯剪分别作用下的工字形焊接板梁,在弹性范围内腹板屈曲时,翼缘会对腹板起约束作用。
There is an analysis of spatial stress on variable cross-section wide box girder of three-span continuous PC rigid frame bridge in the paper.
对一座铁路三跨连续PC刚构桥变截面宽幅箱梁进行了空间应力分析。
Mechanics behaviors of Sutong bridge were computed by this method, and longitudinal stress, transversal stress of plates of the girder and section stress distribution were discussed consequently.
利用该方法对苏通大桥进行整体受力计算,得到钢箱梁板件的横桥向和顺桥向应力,分析了钢箱梁顶板应力在横桥向的不均匀性。
Thus, application of the great span pre-stressed l-section steel girder will have the practical significance regarding the project application, might supply the engineering design reference.
因而,大跨度预应力工字钢梁将对于工程应用具有实际意义,本文的研究成果可供工程设计参考。
Tests show that the cross section of the whole deck, working jointly as the lower flange of the main girder, should be taken for the calculated section subjected to longitudinal prestressing force.
试验证明,在纵向预应力作用下的计算截面应取道床板全部截面作为主梁下翼缘共同工作。
The three dimensional finite element stress analyses of main girder with twin-box cross section used commonly in cable-stayed bridge have been carried out.
本文对斜拉桥双箱单室箱形主梁进行了空间有限元应力分析。
With its excellent section characters, the prestressed concrete box girder plays a main role in PC bridges.
预应力混凝土箱梁以其优良的截面特性在混凝土梁桥中占据主要地位。
On the prestressed concrete(PC) wide Box girder and the steel and concrete joint section of the bridge, the C55 high performance concrete is used.
鄂东长江大桥为混合梁斜拉桥,PC宽箱梁及钢-混凝土结合段采用C55高性能混凝土。
For the code revising, some important conclusions have been drawn through the theoretical analysis and experimental research of the post-buckling strength of web plates of I-section girder.
通过对焊接工字梁腹板屈曲后强度的理论分析及试验研究,得出了一些对规范修订有重要参考价值的结论。
According to the deformation of single cell box girder cross-section, the displacement parameters were designed, and the displacement modes of cross-section distortion angles were deduced.
根据单箱单室箱梁截面的变形,设计位移参数,导出横截面横向、竖向畸变角的变位模式。
This paper presents precise analysis on wall girder torsion of cold bend thin-section steel channel of 2 or 3 continuous bays commonly used.
对单层工业厂房中常用的二跨、三跨连续冷弯簿壁槽钢截面墙梁的扭转问题进行了精确的理论分析。
In addition, the plastic ultimate strength of cross section and some proposals concerning the ultimate strength design of long span PPC continuous box girder...
此外,还对截面塑性极限强度问题进行了探讨,提出了大跨ppc变截面连续梁极限强度设计的建议。
In addition, the plastic ultimate strength of cross section and some proposals concerning the ultimate strength design of long span PPC continuous box girder wi...
此外,还对截面塑性极限强度问题进行了探讨,提出了大跨ppc变截面连续梁极限强度设计的建议。
In addition, the plastic ultimate strength of cross section and some proposals concerning the ultimate strength design of long span PPC continuous box girder wi...
此外,还对截面塑性极限强度问题进行了探讨,提出了大跨ppc变截面连续梁极限强度设计的建议。
应用推荐