• The automatic mesh generating principle and its algorithm are obtained successfully for some representive three dimensional finite element problems.

    成功地获得了一些具有应用代表性的三维板壳和块体结构有限元计算网格的自动划分原理和算法。

    youdao

  • Generating principle of the electrohydraulic impulse technique and its application in cleaning autoclave and chemical container are mainly introduced.

    简要介绍了电液压脉冲技术的作用原理及它在清洗化工容器及油罐方面的具体工艺流程。

    youdao

  • The design principle and implementing technique of an automatic generating tool for the decision system are described.

    本文讨论了一种决策系统的自动生成工具的设计原理与实现方法。

    youdao

  • On the basis of introducing the structure and analyzing the principle of SX421 automatic voltage regulators, this paper applies them to the generating unit excitation voltage system.

    介绍和分析了SX421自动电压调节器的结构和原理,在此基础上,本文将其应用于发电机组励磁调压系统。

    youdao

  • This paper will research the method and devices of generating dynamic strain simulative signal from the working principle of dynamic strain amplifier.

    从动态应变仪的工作原理出发,研究了动态应变模拟信号的产生方法及其设备。

    youdao

  • This paper discusses the main causes of generating oscillation curves, some principle of data acquisition, operation methods, and their application range.

    本文分析了产生振荡状曲线的主要原因,对几种取值方法的原理、操作方法、注意事项及应用范围进行了讨论。

    youdao

  • Based on the operating principle oft he passive loading system, the paper introduces the generating mechanism of the surplus torque.

    在阐述被动式加载系统工作原理的基础上,介绍了多余力的产生机理。

    youdao

  • Through comparison, a scheme of "ac generating, DC energy feedback" electr IC clo sed loop transmission loading test bench is suggested and the hardware diagrams and work principle are presented.

    通过比较提出了“交流发电、直流能量反馈”电封闭式变速器加载试验台方案,给出了硬件结构图,介绍了工作原理。

    youdao

  • Based on the principle of system power cycle and characteristics of Freon power generation system, the model for low temperature waste heat generating was constructed.

    根据系统动力循环原理以及氟里昂循环发电系统的特点,组建了小型低温余热发电系统模型,并对蒸发器、冷凝器、汽轮机模型等组件进行了设计。

    youdao

  • The principle of generating FDTD (Finite Difference Time Domain) grid is analysed, and an improved arithmetic for generating nonuniform FDTD grid is presented.

    分析了时域有限差分(FDTD)网格的生成原理,提出了一种新型非均匀FDTD网格生成算法。

    youdao

  • While the clonal selection principle is responsible for generating the memory cell population, the immune network theory prevents the population size from increasing quickly.

    克隆选择用来产生抗原的记忆细胞群体,免疫网络理论则用来抑制该群体规模的快速增长。

    youdao

  • Based on the application of CEMS to the coal-fired generating unit of Jiaozuo Power Plant, the working principle of a CEMS based on heating type direct extraction is presented.

    以烟气连续排放监测系统在焦作电厂燃煤发电机组上的应用为例,介绍了一种加热式直接抽取法烟气连续监测系统的原理,分析了系统组成及功能、系统运行及系统的维护检修。

    youdao

  • The cause for generating nonuniform characteristics of SSPA image sensor array is investigated based on introduction of its basic operating principle, and the correcting method is given.

    介绍SSPA图象传感器阵列的基本工作原理,在此基础上主要探讨其不均匀性特性形成的原因,并且给出了校正方法。

    youdao

  • SPWM inverter is widely used in industry. We present a new algorithm for generating SPWM waveform to improve its performance. Our new algorithm is based on area equivalent principle.

    基于等面积原理,提出了一种新型变频器SPWM波形动态递推算法,分析了该波形的频谱特性,讨论了其谐波抑制能力。

    youdao

  • The methods used for generating the cutting path in pocket machining are summarized, the principle and processing of the way are analysed and the corresponding flow charts are given.

    概括了型腔加工轨迹生成的方法,分析了采用数学优化的方法来优化行切加工轨迹方向的原理、过程,并给出了相应的程序框图。

    youdao

  • In this paper, the basic principle of generating voltage flicker signal is described and the relationship between the actual generated signal and the given signal is discussed.

    本文阐述了电压闪变信号发生的基本原理,探讨了发生器实发信号与设定信号之间的关系。

    youdao

  • Firstly, the paper analyzes the coding and encoding principle of rs code, gets Galois field and generating polynomial using the MATLAB software, obtains the rs (204188) encoding, too.

    先分析了RS码的编解码原理,通过MATLAB软件产生了域元素及生成多项式,还获取了RS(204,188)的编码。

    youdao

  • The principle of this method is introduced in detail, and a kind of circuit of generating dead time and its timing simulation are given.

    详细叙述了该方法的基本原理,并以其中的一个死区时间产生电路为例,介绍了电路的设计要点及时序分析。

    youdao

  • The principle of wind energy generation, the structure of wind energy generating system, and the developing trend of wind energy generation technology are described in brief.

    简单阐述了风力发电原理、风力发电系统结构和风力发电技术的发展趋势。

    youdao

  • This paper illustrates the principle of dynamic video graduation and the design of the circuit generating single or trip graduation lines.

    阐述了动态视频分划技术的工作原理及单竖线、三竖线的电路设计。

    youdao

  • The principle and test method of using adsorptive stripping voltammetry to determine the mass concentration of trace iron in boiler water of thermal power generating units are described in this paper.

    介绍了用吸附溶出伏安法测定火力发电机组锅炉用水中微量铁质量浓度的原理和试验方法,并对多组试验数据进行了分析和讨论,从而得出测试参数的最佳选取值。

    youdao

  • The principle of generating high speed true random bit sequence using white noise is discussed.

    本文分析了用白噪声产生高速真随机码的基本原理。

    youdao

  • A sequentially arranged cogeneration system for producing coke and generating electricity has been designed according to the principle of comprehensive and stepped utilization of energy.

    根据能量的综合梯级利用原理,设计了串联型炼焦-发电联产系统。

    youdao

  • In the paper, the principle of dynamic video graduation and the design of the circuit generating single or trip graduation lines are illustrated.

    详细阐述动态视频分划技术的工作原理及单横线、三横线的电路设计。

    youdao

  • In addition Mr Reinhart says in reference to the disproportionate impact on poor and middle class americans "quantitative easing as a design principle is generating some inflation."

    此外,莱恩哈特还就美国穷人和中产阶级所承受的比例过大的冲击评论道,“就其设计原则而言,定量宽松本身就会造成一些通胀。”

    youdao

  • The principle, synthetic method and implementation circuits for generating soft SPWM waveform are given.

    文中给出了软化SPWM波形合成基本原理、合成方法及实现电路。

    youdao

  • Based on the principle of gear machining generating method, a modeling method - variable center distance gear modeling method for variable ratio gear sector profile is put forward.

    基于齿轮的范成加工原理,提出了一种变速比齿扇齿廓的定中心距齿轮建模法。

    youdao

  • Based on the principle of gear machining generating method, a modeling method - variable center distance gear modeling method for variable ratio gear sector profile is put forward.

    基于齿轮的范成加工原理,提出了一种变速比齿扇齿廓的定中心距齿轮建模法。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定