Foam gel system is a pseudoplastic fluid and its viscoelasticity is good.
泡沫凝胶体系属于假塑性流体且粘弹性好。
The gel system maintain a high strength and good stability in the 3 months.
凝胶体系在3个月内保持较高的强度，具有很好的稳定性。
Under different conditions, the gel time of the gel system is from hours to days.
该凝胶体系的成胶时间在不同条件下从几个小时至几十个小时的变化。
A diffusion method for the preparation of ferrous oxalate in a gel system was presented.
介绍了一种在凝胶体系中用扩散法制备草酸亚铁的结晶方法。
Through the copolymerization with hydroxy acid, PEG is endowed with gel system biodegradability;
将PEG通过与羟基酸共聚，赋予凝胶体系生物可降解性；
The result indicated that weak gel system had fairly good saline and thermal stability and anti-shear property.
结果表明，弱凝胶体系具有较好的盐热稳定性和抗剪切性。
The injectivity, plugging performance and sweep efficiency of the gel system is evaluated through single and parallel core experiments.
通过单岩心和并联岩心实验对凝胶体系的注入性能、封堵性能和驱油效果进行了评价；
The ionic strength, the type and the concentration of proteins can affect the gelation time and the state of the silica sol-gel system.
离子强度、蛋白种类及浓度均对硅溶胶-凝胶体系的胶凝时间和凝胶状态有影响。
In this paper, the modified starch polymer gel system is investigated for fracture plugging in the low permeability reservoir of Chang 6 in Zhengjin oilfield.
本文以镇泾油田长6低渗透油藏为例，选取改性淀粉聚合物凝胶体系进行地下成胶封堵裂缝实验研究。
It was found that when EA content is higher than 85%, the so-gel system becomes turbid while EA content is lower than 85%, the system is transparent and homogeneous.
实验发现当EA树脂含量高于85%时，随着反应的进行体系会逐渐变浑浊，而EA树脂的含量低于85%时，体系始终是均一透明的。
The formation behavior, flow mechanism and influence factors of the flowing gel system were experimentally investigated, by means of core test and numerical simulation method.
利用室内岩心实验和数值模拟方法，研究了可动凝胶体系的成胶行为、渗流机理和影响因素，给出了矿场试验设计方案。
Researchers from Rice University and Baylor College of Medicine grew a system of and capillaries on a nontoxic plastic matrix. They were able to control where cells grew in their plastic gel.
据美国《大众科学》杂志1月14日报道，美国研究人员日前利聚乙二醇在无毒塑料基质上成功培育出毛细血管，并且可以控制细胞在塑料凝胶中的生长方向。
The basic requirements of storage battery for solar energy photovoltaic power system were introduced. The performance of gel battery and AGM battery was compared.
简述了太阳能光伏电系统用蓄电池的基本要求，比较了胶体电池和AGM电池的性能。
The relations of viscosity vs. temperature and gel time vs. temperature of 3233 epoxy resin system are studied.
研究了3233环氧树脂体系的粘度-温度关系、凝胶时间-温度关系、热力学性能、垂直燃烧性能和力学性能。
The next step is to find a more appealing delivery system than shots; both a gel and a matchstick-sized implant have been discussed.
下一步是要找到比注射更好的药物释放系统；胶体与火柴棒大小的植入剂都已在讨论范围内。
The effects of the agent system on the modification were investigated by testing melt-strength, melt viscosity, the changes of melt flow rate (MFR) and gel content.
通过熔体强度、熔体黏度测试和熔体流动速率(MFR)、凝胶含量的变化研究了试剂体系对接枝交联改性的作用。
The equilibrium swelling test showed that the vulcanization made by using redox system had minimum equilibrium swelling weight increase and maximum gel content.
平衡溶胀试验的结果表明，氧化还原体系制得的硫化胶有最小的平衡溶胀增量和最大的凝胶含量。
The viscosity and gel time of resin system of modified bismaleimide(BMI) resin with rigid polyetherimide(PEI) and the mechanical properties of PEI/BMI/RS/ glass composite materials were studied.
研究了刚性聚醚酰亚胺（PEI）改性双马来酰亚胺（BMI）树脂体系粘度特性和凝胶特性，以及PEI/BMI/RS/玻纤复合材料的力学性能。
Objective To investigate the applicaple scopes of DNA con- tent detected by gel imaging analysis system.
目的探讨利用凝胶成像分析系统进行DNA 定量检测的DNA 含量的范围。
The paper introduces the material feeding process in automatic pressure gel technology production presenting an effective, automatic material feeding system design thinking.
文章论述了自动压力凝胶工艺生产中的注料过程，介绍了一种有效的自动注料系统的设计思想。
A computerized gel electrophoresis image analysis system was developed using digital camera as image acquisition device.
利用数码像机作为图形输入设备，研制了凝胶电泳图象计算机分析系统。
Every collected peak was identified by SDS-PAGE after purified with gel chromatography by fast protein liquid chromatography system.
结合物经快速蛋白质液相层析系统用凝胶色谱柱纯化后，用SDS PAGE鉴定各收集峰。
The results show that the PVA gel may be a fine carrier for transdermal therapeutic system.
结果提示，这种聚乙烯醇凝胶可望作为药物透皮给药系统的一种新的良好载体。
The present work was to determine the optimum sintering system and properties of the nanometer tetragonal polycrystalline zirconia green body by the aqueous gel tape casting process.
采用水基凝胶流延工艺制备四方多晶氧化锆薄膜，确定合理的烧成制度，并考察薄膜的显微结构与烧结性能。
The binary monomer system, Benzel methacrylate(BzMA) Methyl methacrylate(MMA) layer gradient refractive index(GRIN) plates can be successfully fabricated by liquid gel diffusion copolymerization.
采用溶液凝胶扩散共聚法可以成功地合成二元体系的甲基丙烯酸苄酯甲基丙烯酸甲酯层状梯度折射率板。
A new type UP resin system curing at room temperature was introduced as well as the influence of various initiators, promoters on the gel, curing and photic rate of the system.
介绍不饱和聚酯树脂新型室温固化体系，以及不同引发剂、促进剂对体系凝胶、固化和透光率的影响。
The main hydration products in the system are C-S-H gel and micro-crystal hydrated calcium aluminate. When epoxy resin is solidified, the organism is network.
体系中水泥水化的主要产物为C - S -H凝胶和水化铝酸钙，而且水化产物多为凝胶体和微细晶体，环氧树脂固化后，有机物呈网络胶状体。
Polar filler are used in normal phase chromatographic system, among which, silicon gel is the most commonly used.
正相色谱系统使用极性填充剂，常用的填充剂有硅胶等。
In situ gel, a novel sustained-release delivery system, can resolve above problems.
一种新型的缓释给药系统—原位凝胶可解决上述诸多问题。
In situ gel, a novel sustained-release delivery system, can resolve above problems.
一种新型的缓释给药系统—原位凝胶可解决上述诸多问题。
应用推荐