Jiro and his friend "Omi" (left, dressed as a Metal Gear Cyborg Ninja) both played the new game Metal Gear Solid: Peace Walker at the show.
Jiro和他的朋友“Omi”(左边,饰《合金装备》角色机械忍者),两人都在为游戏《合金装备:和平行者》演出。
The paper was reporting on the latest misdeed of Jeremy Clarkson, host of the BBC show Top Gear, who called Prime Minister Gordon Brown one, although the comment wasn't broadcast.
那报纸当时正在报道最近BBC的世界顶级汽车测评节目的主持人杰里米克拉克森访问前英国财政大臣布朗的不当行为,即使评论没有被发布出来。
His example was featured and driven on the UK TV show Top Gear.
他的例子是,精选和推动对英国电视节目顶端齿轮。
The application results show that laser welding can meet higher strength stress demands for those fatigue load parts, such as intake and exhaust valves, timing gear, suspension equipment.
应用结果表明:对于进排气门、正时齿轮和悬架装置等承担疲劳载荷的零部件,激光焊接可满足其较高的强度要求;
Flip to your favorite Saturday morning fishing show, though, and you'll quickly find that this is not the case anymore as several bass anglers frequently downsizing baits and use spinning gear.
浏览一下你们所喜欢的周六早上的钓鱼节目,你会很快发现,由于很多鲈鱼钓手转而使用纺车轮的装备,这种现象已不复存在。
The results of the study show that this method can successfully be applied to the identification and diagnosis of gear faults.
研究结果表明该方法可以成功地用于齿轮常见故障的识别和诊断。
Test results show that deformations in laser hardened gears was negligible to influence gear precision.
检测结果表明:齿轮激光淬火变形很小,不影响齿轮的精度等级。
The experimental results show that it is feasible to machining the spur gear with superplastic extrusion process.
试验结果表明,用超塑挤压的方法加工圆柱直齿轮是可行的。
The experimental results show that this method based on EMD can(effectively) recognize the faults of gear crack.
齿轮故障实验信号的研究结果表明:该方法能有效地识别齿轮的齿根裂纹故障。
The experimental results show that order tracking analysis and Angle domain average technique can effectively diagnose the faults of the gear crack.
通过对齿轮齿根裂纹故障实验信号的分析,表明该方法能有效地诊断齿轮的裂纹故障。
The test results show that the average life of gear can increase40%approximately by taking peen shot for rear axle pinion gear.
台架试验表明,采用该喷丸机对后桥主动锥齿轮进行强化喷丸处理,齿轮的平均寿命提高约40%。
The research results show that the grinding of elliptical gears with CNC conical wheel gear grinding machine is feasible.
研究结果表明,利用数控锥面砂轮磨齿机磨削椭圆齿轮是完全可行的。
Experimental results show that gear vibration signal decomposition can detect different faults, and high-order acceleration signals are more sensitive to certain type of fault.
研究表明,齿轮运动信号分解能够有效检测齿轮的各类故障,高阶加速度信号对齿轮某些类型的早期故障更加敏感。
There are some troubles in a TOYOTA CAMRY passenger car, the analysis results show that the gear variation of A140E AT is the main reason.
针对某款丰田佳美轿车出现的一例故障现象,经分析认为是其装备的A140E型自动变速器挡位发生变异所导致。
Practices show that, with the software, students can easily and efficiently understand the theory as well as practice of gear drive.
实践证明它能使学生在短时间内,更有效地掌握齿轮传动的理论与实践内容。
Simulation results show the feasibility of the application of human simulating intelligent fuzzy control method on intelligent gear shift system of construction vehicles.
仿真结果表明,将仿人智能模糊控制方法应用于工程车辆智能变速系统具有可行性。
The results show that, by the scanning method, we may obtain well-distributed hardness and approximately ideal distribution of hardened layer on gear surface.
采用该工艺,可得到均匀的齿面硬度和较为理想的齿面硬化层分布状态。
The numerical results show that the gear contact fatigue life is connected with gear rotational velocity.
数值计算结果表明:齿轮传动的接触疲劳寿命与齿轮转速戚息相关。
The results show that response frequency of gear mechanism will be reduced by gear backlash and multi-frequency phenomenon will occur.
计算结果表明,齿侧间隙的存在会降低机构的响应频率,并会产生多频现象。
To show the effectiveness of the approach, case study is finally presented for a gear pump.
最后通过齿轮泵的应用实例说明了该优化算法的有效性。
Gear machining experiment results show that the new type of interpolation is correct, practicable, and the machining precision can reach to 6 ~ 5 grade (GB1009588).
实际齿轮加工试验表明:提出的新型双闭环零误差硬件插补同步运动控制原理是正确可行的,齿轮加工精度可稳定在6 ~5级(GB10095 - 88)。
The simulation results show that insufficient corner filling is avoided and the whole gear forming effect is good.
模拟结果表明,齿腔充填饱满且无塌角缺陷。
The results show that the stress distributions in roots of the bevel gear are different under respective loads.
光弹性试验结果表明锥齿轮在两种载荷分别作用下,齿根应力分布是不同的。
Calculations show that, by applying interlocking teeth, the strength of the gear may be improved and the working noise may be reduced.
实例计算表明,“错齿”对提高双圆弧人字齿轮强度和降低噪声有影响。
The tests results show that the deformation of laser-hardened gear is very small, which does not influence the grade of gear.
检测结果表明:齿轮激光淬火变形很小,不影响齿轮的精度等级。
The results show that a modification profile gear is in good condition that a standard one in lowering vibration and temperature aspects.
结果表明,修缘齿轮比标准齿轮在减振、降温等方面有明显改善。
The results show that the run-out errors of the first stage planet gear and its bearing have the most significant effect on the load sharing coefficient.
研究结果表明,第一级星轮及其所在轴轴承偏心误差对系统载荷不均匀系数的影响最大;
The results show that the run-out errors of the first stage planet gear and its bearing have the most significant effect on the load sharing coefficient.
研究结果表明,第一级星轮及其所在轴轴承偏心误差对系统载荷不均匀系数的影响最大;
应用推荐