Finally gate position according the mold flow analysis.
最终的进胶位置根据模流分析。
The mold employed fluidcylinder, secondary gate, secondary locating with pyramidal face and guide pillars, which ensured the precision of the plastic aspheric lens.
此模具拥有液压缸压缩、二次浇口注射，以及锥面与导柱的二次定位等特点，能够准确地保证塑料透镜的精度。
On most automotive battery grids, cooling is required in the top gate area and in the center of the mold only.
绝大部分汽车蓄电池板栅尺需要在顶部浇口部分和模具的中心冷却就可以。
Analyzed the crack appearance of the cable clamp, amend unreasonable of mold gate, and solved the crack problem.
对电缆夹使用过程中断裂现象进行了分析，对模具浇口进行了改进，最终解决了问题。
Through analyzing moulding technology of the toolbox, designed a injection mold with straight gate injection system, ejector rod and stripper plate united ejection mechanism.
通过对工具箱的塑件工艺分析，确定了直浇口浇注系统、推杆、顶板联合顶出的模具结构。
This paper introduces the experimental studies on the warpage of injection molded strip parts in the design of part structure and mold gate and the selecting of molding conditions and materials.
从制品结构和模具浇口设计、原材料和成型条件的优选诸方面对长条形注塑件翘曲变形进行了系统的试验研究。
Slanting gate cover is used, and the injection process conditions of this mold are introduced in details.
使用了倾斜浇口套，详细介绍了该模具的注射工艺条件。
A fan-shaped gate was used for feeing in the injection mold with two cavities for kitchenware fitting, enhancing uniformity of material feeding and reducing internal stress of the plastic parts.
在一模二腔的厨具塑料配件注塑模结构中，采用扇形浇口进料，提高了进料的均匀性并降低了塑件的内应力。
For the injection mold structure of transparent plastic cover shell, point gate feeding is adopted.
对透明塑料罩壳注射模结构，采用点浇口进料。
Three-plate mold; Pointed gate; Mold ranging parting; Restricted ejector of fixed-die; Mold structure.
三板模；点浇口；模外定距分型；定模限位顶出；模具结构。
The use of the mold gate feed points, the use of column-oriented direct introduction, putting the completion of release, and molds to choose the materials.
模具使用频点的大门，直指南支柱的指导下，屋顶酒吧完成图纸的模式，并进行了选择，模具的材料。
In the design of multi-cavity injection mold, the design of the branch of flow channel and the gate has great influence on the quality of plastics products.
在注塑模设计中，分流道+和浇口的设计对塑料成型的质量影响较大，一直是人机交互式流道+设计的难点。
Introduced the injection mold structure of the plastic products of the air chute fence gate.
介绍了通风道栅门塑料产品的注射模结构。
The numerical simulation methodology and optimization algorithms are integrated to optimize gate location of mold design. A new optimization method of experience search is founded.
在此基础上，将数值模拟技术和优化算法相结合，提出了基于数值模拟技术的浇口位置的优化方法：经验搜索法。
With this system, the runner gate system design, mold cooling analysis, surface modeling, and automatic drawing could all be well carried out on microcomputer.
此系统主要解决了四个难点：浇注系统设计、冷却系统分析、型腔、型芯的曲面造型设计、装配图和零件工作图的设计绘制。
In this article, ingeniously utilized TAB gate and two times location system and overflow canal, and designed injection mold. Guaranteed well the mold's quality.
本文巧妙地运用了护耳式浇口、二次定位系统及溢流槽来设计模具，更好地保证了塑件质量。
The highest volume molding method, in which the material is forced from an external heated chamber through a sprue, runner or gate into a cavity of a closed mold by means of high pressure.
容量最大的造模法，通过高压的作用材料从外部加热室通过铸口、流道或浇口进入闭式压膜室。
Hot runner nozzle is the terminal of the hot runner system, which includes the heating, the end of the gate, which can transfer the molten material to the mold cavity or the additional cold runner.
热流道喷嘴是热流道系统的终端，它包括加热，浇口的末端，它将熔料输送到模具型腔或附加的冷流道。
The mold gate processing is simple.
模具浇口加工简单；
Taking the card of certain relay as an example, introduced a practical structure witch can cut the gate automatically on the injection mold.
以某继电器的推动卡为例，介绍注射模上一种实用的自动切浇口结构。
At the same time, gate entry velocity and gate dimension have great influence on the mold filling process, and high quality metal castings could be obtained …
同时，内浇道充型速度和内浇道尺寸对压铸件充填过程影响很大，合理的设置可以减少涡流和卷气，得到高质量的压铸件。
At the same time, gate entry velocity and gate dimension have great influence on the mold filling process, and high quality metal castings could be obtained …
同时，内浇道充型速度和内浇道尺寸对压铸件充填过程影响很大，合理的设置可以减少涡流和卷气，得到高质量的压铸件。
应用推荐